HP LaserJet P4015dn User Manual

7 Use product features
●Economy settings
●
Staple documents
●
Use job storage features
ENWW89
 

Economy settings
EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use
less toner and decrease the cost per page. However, using EconoMode can also reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is...

4.Press the down arrow  to highlight SLEEP MODE, and then press OK.
5.Press the up arrow 
 or the down arrow  to select ON or OFF, and then press OK.
6.
Press Menu 
.
Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
Set the wake time
1.
Press Menu .
2.Press the down arrow 
 to highlight CONFIGURE DEVICE, and then press OK.
3.Press...

Staple documents
If you cannot select the stapler in the program or printer driver, select the stapler at the product control
panel.
You might need to configure the printer driver to recognize the optional stapler/stacker. You need to set
this setting only once. See the printer driver online Help for details.
Select the stapler in the software (Windows)
1.On the File menu, click Print, and then click Properties.
2.On the Output tab, click the drop-down list under Staple, and click One Staple Angled....

Use job storage features
The following job-storage features are available for print jobs:
●Proof and hold jobs: This feature provides a quick and easy way to print and proof one copy of
a job and then print the additional copies.
●Personal jobs: When you send a private job to the product, the job does not print until you provide
the required personal identification number (PIN) at the control panel.
●Quick Copy jobs: You can print the requested number of copies of a job and then store a copy of
the job...

6.If the job requires a PIN, use the numeric keypad or press the up arrow  or the down arrow  to
enter the PIN, and then press OK.
NOTE:If you use the up arrow  or the down arrow  to enter the PIN, press OK after each digit.
7.Use the numeric keypad, or press the up arrow  or the down arrow  to select the number of
copies.
8.Press OK to print the job.
Delete a stored job
When you send a stored job, the product overwrites any previous jobs with the same user and job name.
If a job is not already stored...

8 Print tasks
●Cancel a print job
●
Use features in the Windows printer driver
ENWW95
 

Cancel a print job
You can stop a print request by using the control panel or by using the software program. For instructions
about how to stop a print request from a computer on a network, see the online Help for the specific
network software.
NOTE:It can take some time for all printing to clear after you have canceled a print job.
Stop the current print job from the control panel

Press the stop button  on the control panel.
Stop the current print job from the software program
When you send the print...

Use features in the Windows printer driver
NOTE:The following information is for the HP PCL 6 printer driver.
Open the printer driver
How do ISteps to perform
Open the printer driverOn the File menu in the software program, click Print. Select
the printer, and then click Properties or Preferences.
Get help for any printing option Click the ? symbol in the upper-right corner of the printer driver,
and then click any item in the printer driver. A pop-up message
displays that provides information about the...

Set paper and quality options
To perform the following tasks, open the printer driver and click the Paper/Quality tab.
How do ISteps to perform
Select a page sizeSelect a size from the Paper size drop-down list.
Select a custom page sizea) Click Custom. The Custom Paper Size dialog box opens.
b) Type a name for the custom size, specify the dimensions,
and click OK.
Select a paper sourceSelect a tray from the Paper source drop-down list.
Select a paper typeSelect a type from the Paper type drop-down...