HP LaserJet Enterprise P3015dn User Manual

Paper handling menu
Use this menu to configure input trays by size and type. It is important to correctly configure the trays
with this menu before you print for the first time.
To display: Press the Menu button 
, and then select the  PAPER HANDLING menu.
NOTE:If you have used other HP LaserJet products, you might be accustomed to configuring Tray 1
to  First  mode or  Cassette mode. On HP LaserJet P3010 Series printers, setting Tray 1 to  ANY SIZE
and  ANY TYPE  is equivalent to First  mode. Setting...

Manage supplies menu
Use this menu to configure how the product alerts you when supplies are approaching the estimated
end of life.
To display: Press the Menu button 
, and then select the  MANAGE SUPPLIES  menu.
NOTE:Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Menu itemSub-menu itemValuesDescription
AT VERY LOWBLACK CARTRIDGESTOP
PROMPT TO CONTINUE
CONTINUE *Select what the product should
do when the print cartridge is very
near the end of its...

Configure device menu
Use the CONFIGURE DEVICE  menu for the following tasks:
● Change the default printing settings.
● Adjust the print quality.
● Change the system configuration and I/O options.
● Reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display:
 Press the Menu button 
, select the  CONFIGURE DEVICE  menu, and then select the
PRINTING  menu....

Menu itemValuesDescription
COURIER FONTREGULAR*
DARKSelect a version of the Courier font.
The DARK setting is an internal Courier
font available on HP LaserJet Series III
printers and older.
WIDE A4NO  *
YESChange the printable area of A4 paper.
NO : The printable area is seventy-eight 10-
pitch characters on a single line.
YES: The printable area is eighty 10-pitch
characters on a single line.
PRINT PS ERRORSOFF *
ONPrint PS error pages.
PRINT PDF ERRORS OFF*
ON Print PDF error pages.
PCL sub-menu
This...

ItemValuesDescription
SUPPRESS BLANK PAGESNO*
YESWhen generating your own PCL, extra form feeds are
included that would cause a blank page to be printed. Select
YES for form feeds to be ignored if the page is blank.
MEDIA SOURCE MAPPING The PCL5 MEDIA SOURCE MAPPING  command selects an
input tray by a number that maps to the various available
trays and feeders.
 STANDARD *The numbering is based on newer HP LaserJet printers with
updated changes to the numbering of trays and feeders.
  CLASSICThe...

ItemSub-itemSub-itemValuesDescription
FUSER MODESA list of paper types
displays. NORMAL
HIGH2
HIGH1
LOW
LOW1Each paper type has a default fuser
mode. Change the fuser mode only if you
are experiencing problems printing on
certain paper types. After you select a
type of paper, you can select a fuser mode
that is available for that type.
RESTORE MODES  Return all fuser-mode settings to the
factory-default settings.
OPTIMIZE   Optimize various print modes to solve
print-quality issues.
RESTORE OPTIMIZE...

ItemSub-itemSub-itemValuesDescription
AUTO CLEANING  OFF*
ONWhen auto-cleaning is on, the product
prints a cleaning page when the page
count reaches the CLEANING
INTERVAL setting.
CLEANING
INTERVAL  500*
1000
2000
5000
10000
20000When  AUTO CLEANING  is on, this
option specifies the number of pages that
are printed before a cleaning page is
automatically printed.
AUTO CLEANING
SIZE  LETTER *
A4When  AUTO CLEANING  is on, this
option specifies the paper size that is
used to print the cleaning page....

System setup menu
Use the SYSTEM SETUP menu to change product-configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display: Press the  Menu button 
, select the  CONFIGURE DEVICE  menu, and then select the
SYSTEM SETUP menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ItemSub-itemValuesDescription
DATE/TIMEDATE- - - - /[MMM]/[DD] YEAR =
[YYYY]/- - - /[DD] MONTH=
[YYYY]/[MMM]/- - DAY=Set the correct...

ItemSub-itemValuesDescription
 USE REQUESTED TRAYEXCLUSIVELY*
FIRSTSet how to handle jobs that have
specified an input tray.
● EXCLUSIVELY
: The product
never selects a different tray
when the user has indicated
that a specific tray should be
used, even if that tray is
empty.
● FIRST
: The product can pull
from another tray if the
specified tray is empty, even
though the user specifically
indicated a tray for the job.
 MANUALLY FEED PROMPTALWAYS *
UNLESS LOADEDSpecify when a manual feed
message should...

ItemSub-itemValuesDescription
 USE ANOTHER TRAYENABLED*
DISABLEDTurn on or off the control-panel
prompt to select another tray when
the specified tray is empty.
● ENABLED
: The product
prompts either to add paper to
the selected tray or to choose
a different tray.
● DISABLED
: The product
prompts the user to add paper
to the tray that was initially
selected.
 DUPLEX BLANK PAGESAUTO *
YESControl how the product handles
two-sided jobs (duplexing).
● AUTO
: Enables Smart
Duplexing, which instructs
the...