HP LaserJet 9050N User Manual

ENWWPaper specifications159
Optional 
multifunction 
finisherUp to 1,000 
sheets of 
stacked 20 lb 
bond for Letter 
and A4 (up to 
50 sheets 
stapled), and 
500 sheets 
stacked 20 lb 
bond for A3 
and 11 x 17 (up 
to 25 sheets 
stapled)
Up to 40 
booklets of 5 
sheets stacked 
or 20 booklets 
of 10 sheets 
stacked●Standard sizes:
Letter, Legal, Executive, ISO A3, 
ISO A4, ISO A5, JIS B4, JIS B5, 
11 x 17
●Custom sizes:
Minimum: 98 x 191 mm 
(3.9 x 7.5 inches)
Maximum: 312 x 470 mm
(12.3 x 18.5 inches)...

160Appendix A Specifications ENWW
Supported types of paper
Use settings on the printer control panel to select the following types of paper and other print 
media.
●Plain
●Pre-printed
●Letterhead
●Transparency (see Transparencies)
●Prepunched
●Labels (see Labels)
●Bond
●Recycled
●Color
●Card stock (see  Card stock and heavy paper )
●Rough
●Envelope (for Tray 1 only)
Guidelines for using paper 
For best results, use conventional 75 g/m2 (20 lb) paper. Make sure the paper is of good quality, 
and free of...

ENWWPaper specifications161
Labels
To avoid damaging the printer, use only labels recommended for use in monochrome laser 
printers. Never print on the same sheet of labels more than once.
CAUTIONDo not print on both sides of labels, transparencies, envelopes, custom paper, or paper heavier 
than 216 g/m2 (58 lb bond). Damage to the printer and jams might result.
Label construction
When selecting labels, consider the quality of each component:
●Adhesives: The adhesive material should be stable at 200°C...

162Appendix A Specifications ENWW
Envelope construction
Envelope construction is critical. Envelope fold  lines can vary considerably, not only between 
manufacturers, but also within a box from the same manufacturer. Successful printing on 
envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the 
following components:
●Weight:  See Paper specifications  for supported envelope weight.
●Construction: Prior to printing, envelopes should lay fl at with less than 6 mm (0.3...

ENWWEnvironmental specifications163
Environmental specifications
Electrical specifications
WA R N I N G !Power requirements are based on the country/region where the printer is sold. Do not convert 
operating voltages. This may damage the printer and void the product warranty.
Power requirements
Power consumption
110-Volt models 230-Volt models
100-127V (+/- 10%)
50/60 Hz (+/- 2 Hz) 220-240V (+/- 10%)
50/60 Hz (+/- 2 Hz)
Rated short-term current 12 Amps 5.3 Amps
Power consumption (average, in watts)1...

164Appendix A Specifications ENWW
Acoustical specifications
NoteConfiguration tested: The HP LaserJet 9050 printing simplex from Tray 3 at 50 ppm using 
A4 paper, and the HP LaserJet 9040 printing simplex from Tray 3 at 40 ppm using A4 paper.
Operating environment
Declared per ISO 9296
Sound power level
1
HP LaserJet 9050
Sound power level
2
HP LaserJet 9040 Printing (50 ppm) L
WA d = 7.2 Bels (A) [72 dB(A)]
Ready L
WA d = 5.6 Bels (A) [56 dB(A)]
Printing (40 ppm) L
WA d = 7.0 Bels (A) [dB(A)]
Ready L
WA...

ENWWOverview165
B
Control-panel menus
Overview
The control-panel menu layout shows the menus that everyone uses while protecting the menus 
that administrators use. Everyone typically uses the first three menus in the list. Administrators 
and service technicians use the other items,  which can be protected with a personal 
identification number (PIN).
Perform most routine printing tasks from the computer by using the printer driver or the software 
program. These settings override the printer...

166Appendix B Control-panel menus ENWW
Retrieve job menu
Note If no private, stored, quick copy, or proof and hold jobs are stored on the printer hard disk or in 
RAM, the message NO STORED JOB appears when the menu is selected.
1 A list of user names appears.
2 Select a user name, and a list of jobs that are stored for that user appears.
3 Select a job name, and print or delete that job. If a job requires a PIN before it can be printed 
or deleted,   appears next to the  PRINT or DELETE  command and a...

ENWWPaper handling menu167
Paper handling menu 
When paper handling settings are correctly configured through the control panel, you can print 
by selecting the type and size of paper from the printer driver or software application. For more 
information, see Specifying paper to print on .
Some items in this menu (such as duplex and manual feed) are available from specific software 
programs, or from the printer driver (if the appropriate driver is installed). Printer driver and 
software program...

168Appendix B Control-panel menus ENWW
Configure device menu
This menu contains all administrative functions.
Printing submenu
Some items in this menu are available from a software application, or from the printer driver (if 
the appropriate driver is installed). Printer driver and program settings override control-panel 
settings. For more information, see  Using features in the printer driver.
Item Values Explanation
COPIES=1 1  to 32,000 Set the default number of copies by selecting any number 
from 1...