HP Laserjet 4 Manual

Status 100/115 V 220/240 V
Recommended
Minimum Circuit
Capacity11.2 amps 5.0 amps
Peak Inrush Current 19-34 amps 17-40amps
25% Decay Time 8.7-16.9 ms 1.4-9.9 ms
Peak Fuser Current 65-71 amps 29-34 amps
Return-to Average Time  375-475 ms   220-300 ms
Table B-6Electrical Specifications
Operating EnvironmentTemperature: 10° C to 32.5° C (50° F to 90.5° F)
Humidity: 20-80% 
Storage/Standby Environment
(not including toner cartridge)Temperature: 0° to 35° C (32° to 95°F)
Humidity: 10-95% 
Maximum Duty Cycle...

Related Documentation   
The following manuals can be ordered from Hewlett-Packard’s
Support Materials Organization (SMO). The phone number for
SMO is (800) 227-8164.
HP LaserJet 5/5M/5N
Documents—DescriptionPart Number
Getting Started Guide for  the HP LaserJet
5/5M/5N PrinterC3917-90901
HP LaserJet 5/5M/5N User’s Manual C3916-90901
HP PCL5 Printer Language Technical
Reference Package5010-3994
HPJet Direct Network Installation GuideJ2552-90011
HPJet Direct Network Software Configuration
Guide...

Laser Statement (Sweden/Finland)  
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet(s) 5/5M/5N laserkirjoitin on käyttäjän kannalta
turvallinen luokan 1 laserlaite. Normaalissa käytössä
kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen
ulkopuolelle.
Kirjoittimen on hyväksynyt Suomessa laserturvallisuuden osalta
Sähkötarkastuskeskus. Laitteen turvallisuusluokka on
määritetty valtioneuvoston päätöksen N:o 472/1985 ja standardin
EN 60825 (1991) mukaisesti.
VAROITUS !...

Control Panel Layout
The LaserJet 5 control panel consists of a 16-character scrolling
display panel and six keys, three of which have forward and
backward scrolling functions.  Figure B-2 shows the display panel.
Control Panel Keys
The table on the following page explains how the control panel
keys work.
Figure B-2 Control Panel Keys
B-10 LaserJet 5/5M/5N Printer 

Key Explanation
 Go  The  Go  key replaces the On Line, Form Feed, and
Continue keys from previous HP LaserJet printers.  The 
Go  key performs five main functions:
Switches the state of communication between computer
and printer either on (on line) or off (off line).
Prints any data remaining in printer’s buffer.  Does not
send a blank sheet of paper through the printer.
Allows the printer to resume printing after a printer
message (such as 20 MEM OVERFLOW) has placed it off
line.  Clears most printer...

Key Explanation
 Item Press  Item  to cycle through the selected menu’s items.
Press the  >  end of the key to move forward through the
items.  Press the
 <  end of the key to move backward through the items.
Menu items vary depending on options installed and
configuration of other menu choices.
 - Value + Press  - Value +  to cycle through the selected item’s
values.  Press the  >  end of the key to move forward
through the values.  Press the 
 <  end of the key to move backward through the values....

Control Panel Menus
Figure B-3 shows the menus and menu items available with the
basic printer configuration.  Not all menu items are discussed in
this section.  Only those items of specific interest from a service
standpoint, or items new to the printers are discussed in this
section.  If options such as PostScript or a different I/O are
installed, the new menu items automatically are added at the
appropriate location.  For example, a PostScript Menu appears
following the PCL Menu.
To change a control...

Figure B-3 Control Panel Menu Map
B-14 LaserJet 5/5M/5N Printer 

Printing Menu
Item Options Explanation
PRINT MENU
MAPNo options available When PRINT MENU MAP is
displayed, press  Select  to print a
configuration page and a menu
map.  The message PRINTING
CONFIGURATION PAGE is displayed. 
PWRSAVE OFF, 
15 MIN,
30 MIN*,
1 HR,
2 HRS,
3 HRSPWRSAVE stands for PowerSave.
This menu item sets the amount
of time you want the printer to be
idle before the printer cools down.
The printer automatically starts
warming to printing temperature
when a job is sent to the printer, a...

Item Options Explanation
ORIENTATION P*
LP stands for portrait (vertical) and
L stands for landscape
(horizontal) orientation of type on
the page.
FORM
(5 TO 128 LINES)60* (110V printers)
64* (220V printers)Sets vertical spacing, from 5 to
128 lines, for default paper size.
Press 
 - Value +  once to change setting
by increments of 1 or hold down
to scroll by increments of 10.
MANUAL FEED OFF*
ONAvailable only through Tray 1.
When Manual Feed is on and
Tray 1 is empty, the printer goes
off line when it...