HP Laserjet 4 Manual

							Status 100/115 V 220/240 V
Recommended
Minimum Circuit
Capacity11.2 amps 5.0 amps
Peak Inrush Current 19-34 amps 17-40amps
25% Decay Time 8.7-16.9 ms 1.4-9.9 ms
Peak Fuser Current 65-71 amps 29-34 amps
Return-to Average Time  375-475 ms   220-300 ms
Table B-6Electrical Specifications
Operating EnvironmentTemperature: 10° C to 32.5° C (50° F to 90.5° F)
Humidity: 20-80% 
Storage/Standby Environment
(not including toner cartridge)Temperature: 0° to 35° C (32° to 95°F)
Humidity: 10-95% 
Maximum Duty Cycle 35,000 pages per month
Table B-5Environmental Specifications
LaserJet 5/5M/5N Printer  B-7 
						

							Related Documentation   
The following manuals can be ordered from Hewlett-Packard’s
Support Materials Organization (SMO). The phone number for
SMO is (800) 227-8164.
HP LaserJet 5/5M/5N
Documents—DescriptionPart Number
Getting Started Guide for  the HP LaserJet
5/5M/5N PrinterC3917-90901
HP LaserJet 5/5M/5N User’s Manual C3916-90901
HP PCL5 Printer Language Technical
Reference Package5010-3994
HPJet Direct Network Installation GuideJ2552-90011
HPJet Direct Network Software Configuration
Guide J2552-90001
PostScript SIMM Technical Reference Guide C3918-90901 Table B-7
Printer Documentation
B-8 LaserJet 5/5M/5N Printer 
						

							Laser Statement (Sweden/Finland)  
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet(s) 5/5M/5N laserkirjoitin on käyttäjän kannalta
turvallinen luokan 1 laserlaite. Normaalissa käytössä
kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen
ulkopuolelle.
Kirjoittimen on hyväksynyt Suomessa laserturvallisuuden osalta
Sähkötarkastuskeskus. Laitteen turvallisuusluokka on
määritetty valtioneuvoston päätöksen N:o 472/1985 ja standardin
EN 60825 (1991) mukaisesti.
VAROITUS ! Laitteen käyttäminen muulla kuin käyttöohjeessa
mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan
1 ylittävälle näkymättömälle lasersäteilylle.
VARNING ! Om apparaten används på annat sätt än i
bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO HP LaserJet (s)5/5M/5N Plus-kirjoittimen sisällä ei ole
käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja
huoltaa ainoastaan sen huoltamiseen koulutettu henkilö.
Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin
vaihtamista, paperiradan puhdistusta tai muita käyttäjän
käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja
ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja.
VARO !Mikäli kirjoittimen suojakotelo avataan, olet alttiina
näkymättömälle lasersäteilylle laitteen ollessa toiminnassa. Älä
katso säteeseen.
VARNING !Om laserprinterns skyddshölje öppnas då apparaten
är i funktion, utsättas användaren för osynlig laserstrålning.
Betrakta ej strålen.
Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 770-795 nm
Teho 5 mW
Luokan 3B laser
LaserJet 5/5M/5N Printer  B-9 
						

							Control Panel Layout
The LaserJet 5 control panel consists of a 16-character scrolling
display panel and six keys, three of which have forward and
backward scrolling functions.  Figure B-2 shows the display panel.
Control Panel Keys
The table on the following page explains how the control panel
keys work.
Figure B-2 Control Panel Keys
B-10 LaserJet 5/5M/5N Printer 
						

							Key Explanation
 Go  The  Go  key replaces the On Line, Form Feed, and
Continue keys from previous HP LaserJet printers.  The 
Go  key performs five main functions:
Switches the state of communication between computer
and printer either on (on line) or off (off line).
Prints any data remaining in printer’s buffer.  Does not
send a blank sheet of paper through the printer.
Allows the printer to resume printing after a printer
message (such as 20 MEM OVERFLOW) has placed it off
line.  Clears most printer messages and places the
printer back on line.
Overrides paper or envelope size selection regardless of
size of media in Tray 1, optional Envelope Feeder, Tray 2,
or Tray 3.
Overrides a request to manually feed paper or an
envelope by selecting paper from the next available
source instead.
 Job Cancel The  Job Cancel  key performs one function — deleting a
print job from the printer:
Press  Job Cancel  to cancel a job that the printer is
currently processing.  The printer will display CANCELING
JOB, clear the printer buffer, and return to a READY
state.
If  Job Cancel  is accidentally pushed, the job must be
reprinted.  There is no undo function.
If  Job Cancel  is pushed when the printer is isle, NO JOB
TO CANCEL will appear briefly, and then a READY display
will reappear.
 Menu Press  Menu  to cycle through the control panel menus.
Press the  >  end of the key to move forward through the
menus.  Press the 
 <   end of the key to move backward through the menus.
When an option is added to the printer (PostScript, for
example), a menu for that option appears in the
sequence.  See “Control Panel Menus,” in this chapter,
for more information.
Table B-8 Control Panel Keys
LaserJet 5/5M/5N Printer  B-11 
						

							Key Explanation
 Item Press  Item  to cycle through the selected menu’s items.
Press the  >  end of the key to move forward through the
items.  Press the
 <  end of the key to move backward through the items.
Menu items vary depending on options installed and
configuration of other menu choices.
 - Value + Press  - Value +  to cycle through the selected item’s
values.  Press the  >  end of the key to move forward
through the values.  Press the 
 <  end of the key to move backward through the values.
 Select The  Select  key saves a control panel setting you
selected.  An asterisk (*) appears next to the saved
selection, indicating that it is the default.  Default settings
remain in place when the printer is switched off or reset.
The Select key is also used when printing a test page or
configuration page from the control panel.
B-12 LaserJet 5/5M/5N Printer 
						

							Control Panel Menus
Figure B-3 shows the menus and menu items available with the
basic printer configuration.  Not all menu items are discussed in
this section.  Only those items of specific interest from a service
standpoint, or items new to the printers are discussed in this
section.  If options such as PostScript or a different I/O are
installed, the new menu items automatically are added at the
appropriate location.  For example, a PostScript Menu appears
following the PCL Menu.
To change a control panel setting:
1Press  Menu  repeatedly until the menu you want appears.
2Press  Item  repeatedly until the item you want appears.
3Press  -Value+  until the setting you want appears.
4Press  Select  to save your selection.
NoteAn asterisk appears next to your selection in the
display, indicating that it is now the default.
5Press  Go  to exit the menu.
Reference Explanation
1 Printing Menu: Lists the current printing and PowerSave settings.
2 PCL Fonts Menu: Lists current font settings.
3 Postscript Menu: List current postscript settings.
4 Job Menu: Lists current settings for print resolution, personality, and I/O
timeout.
5 Config Menu: List current internal configuration settings of the printer.
6 Mem. Config. Menu: Lists I/O buffer and resource saving buffer settings.
7 Parallel Menu:  Lists current settings of the parallel port.
8 Serial Menu: Lists current settings of the serial port.
9 HP MIO Menu: Lists current settings of the MIO card.
10 Reset Menu: Lists reset options available.
11 Test Menu: Lists internal tests available.
Table B-9 Control Panel Menu for the HP LaserJet 5
(Refer to Figure B-3)
LaserJet 5/5M/5N Printer  B-13 
						

							Figure B-3 Control Panel Menu Map
B-14 LaserJet 5/5M/5N Printer 
						

							Printing Menu
Item Options Explanation
PRINT MENU
MAPNo options available When PRINT MENU MAP is
displayed, press  Select  to print a
configuration page and a menu
map.  The message PRINTING
CONFIGURATION PAGE is displayed. 
PWRSAVE OFF, 
15 MIN,
30 MIN*,
1 HR,
2 HRS,
3 HRSPWRSAVE stands for PowerSave.
This menu item sets the amount
of time you want the printer to be
idle before the printer cools down.
The printer automatically starts
warming to printing temperature
when a job is sent to the printer, a
control panel key is pressed,
paper is loaded or removed, or
the top door is opened. 
COPIES 1* to 999 Select any number from 1 to 999.
Press  - Value +  once to change
setting by increments of 1 or hold
down to scroll by increments of
10.
PAPER
ENVELOPELETTER* (110V printers),
A4* (220V printers),
Executive,
Legal,
A5 (from Tray 1 only)
COM 10* (110V printers)
DL* (220V printers)
Monarch,
C5,
B5The default image size for paper
or envelopes can be set with the
control panel.
WIDE A4 NO*
YESChanges the number of
characters that may be printed on
a single line of A4 paper.  For
example, when set to NO, 78
10-pitch characters will be printed
on one line.  When set to YES, 80
10-pitch characters will be printed.
COURIER REGULAR*
DARKWhen set to REGULAR, the internal
courier font is the same font used
in the LaserJet series 4 printers.
When set to DARK, the internal
courier font is the same as the
LaserJet series 3 printers.  Both
fonts are not available at the
same time.
TableB-10
Printing Menu Items
* Indicates factory default.
LaserJet 5/5M/5N Printer  B-15 
						

							Item Options Explanation
ORIENTATION P*
LP stands for portrait (vertical) and
L stands for landscape
(horizontal) orientation of type on
the page.
FORM
(5 TO 128 LINES)60* (110V printers)
64* (220V printers)Sets vertical spacing, from 5 to
128 lines, for default paper size.
Press 
 - Value +  once to change setting
by increments of 1 or hold down
to scroll by increments of 10.
MANUAL FEED OFF*
ONAvailable only through Tray 1.
When Manual Feed is on and
Tray 1 is empty, the printer goes
off line when it receives a print
job and displays MANUALLY FEED
media size. 
RET OFF
LIGHT
MEDIUM*
DARKRefines the print quality.
ECONOMODE OFF*
ONReduces the amount of toner on
the printer page when to set to
ON.
DUPLEX OFF*
ONDetermines whether printer prints
on both sides (duplex ON) or one
side (duplex OFF) of a sheet. 
BIND LONG EDGE*
SHORT EDGEDetermines orientation of print on
the page when using a duplex
unit. 
* Indicates factory default.
Shading denotes optional items.
B-16 LaserJet 5/5M/5N Printer