HP Envy 6 Service Manual

For use in country or region: Spare part number: For use in country or region: Spare part number:
Keyboard in black finish for use in
Germany686836-041 Keyboard in black finish for use in
Portugal686836-131
Keyboard in black finish for use in
Turkey686836-141 Keyboard in black finish for use in
Hungary686836-211
Keyboard in black finish for use in
Israel686836-BB1 Keyboard in black finish for use in
Slovenia686836-BA1
Keyboard in black finish for use in
Canada686836-DB1 Keyboard in black finish for use...

For use in country or region: Spare part number: For use in country or region: Spare part number:
Black/silver backlit keyboard for
use in Switzerland692759–BG1 Black/silver backlit keyboard for use
in the Netherlands692759–B31
Black/Silver backlit keyboard for
use in Saudi Arabia692759–171 Black/silver backlit keyboard for use
in Denmark, Norway, Finland692759–DH1
Before removing the keyboard, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation,...

3.Remove the single screw (1), and then release the keyboard and keyboard bracket from the top
cover (2).
4.Remove the 1 Phillips PM 2.5x3 screw securing the keyboard to the bracket (1), disconnect the
keyboard cable (2) (pushing it through the bracket), and then remove the keyboard from the
bracket (3).
Reverse this procedure to install the keyboard.
Component replacement procedures 65 

Top cover
DescriptionSpare part number
Top cover686097–001
690198–001
Before removing the top cover, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.Remove the...

Before removing the antenna cables:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.Remove the display panel (see 
Display panel on page 32).
5.Remove the base enclosure (see 
Base...

5.Remove the base enclosure (see Base enclosure on page 34).
6.Disconnect the battery cable (see 
Battery on page 36).
Remove the display panel cable assembly:
▲Disconnect the display panel cable from the webcam, and then remove the cable on the left side
up to the left hinge.
Webcam assembly
Description Spare part numbers
Webcam assembly 686587–001
Before removing the webcam assembly:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and...

▲Disconnect the webcam cable (1), and then remove the cable (2).
Display hinges and hinge covers
Description Spare part number
Display hinges 686596–001
Display hinge covers 686595–001
Before removing the webcam assembly:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging...

Remove the display hinge covers:
1.Remove the Phillips PM screws that secure the display the left and right hinge covers (1), and
then remove the hinge covers (2).
2.Remove the 4 Phillips PM screws (2 on each side) that secure the hinge to the display panel (1),
and then remove the hinges (2).
70 Chapter 4   Removal and replacement procedures 

5 Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup
Utility includes settings for the types of peripherals installed, the startup sequence of the computer,
and the amount of system and extended memory.
NOTE:Use extreme care when making changes in Setup Utility. Errors can prevent the computer...

Navigating and selecting in Setup Utility
To navigate and select in Setup Utility, follow these steps:
1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
●To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter, or use a pointing device to click the item.
●To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen, or use...