HP Envy 4500 User Manual

							Wireless settings
Press the Wireless button to view wireless status and menu options.
●If the printer has an active connection to a wireless network, the wireless light will be on solid
blue. In the mean time, the printer display will show Connected and the printer’s IP address.
●If wireless is turned off the wireless light will be off, the display screen shows Wireless Off.
●If wireless is enabled (wireless radio on) and you do not have a wireless connection, the wireless
light will be blinking. In the mean time, the display screen shows that it is either in the process of
Connecting or Not Connected.
You can use the printer display to retrieve information about your wireless network, establish a
wireless connection, and more.
How do I? Instructions
Print network configuration page.
The network configuration page will display the network
status, hostname, network name, and more.
1.Press the Wireless button to access the Wireless Status
menu.
2.Press the button next to Settings to access the WirelessSettings menu.
3.Select Print Report, and then select Configuration Page.
Print wireless network test report.
The wireless network test report will display the diagnostics
results for the status of the wireless network, wireless signalstrength, detected networks, and more.
1.Press the Wireless button to access the Wireless Status
menu.
2.Press the button next to Settings to access the WirelessSettings menu.
3.Select Print Report, and then select Test Report.
Restore network settings to default settings.1.Press the Wireless button to access the Wireless Status
menu.
2.Press the button next to Settings to access the WirelessSettings menu.
3.Select Restore Defaults.
4.Confirm selection to restore defaults.
Turn wireless on or off.1.Press the Wireless button to access the Wireless
Settings menu.
2.Select Wireless.
3.From the Wireless On/Off menu select On or Off.
Establish a Wi-Fi Protected Setup (WPS) connection. For more information, see Wi-Fi Protected Setup (WPS –
requires WPS router) on page 52.
ENWWWireless settings 7 
						

							Auto-Off
Auto-Off is automatically enabled by default when you turn on the printer. When Auto-Off is enabled,
the printer will automatically turn off after 2 hours of inactivity to help reduce energy use. Auto-Off
turns the printer off completely, so you must use the On button to turn the printer back on. For printer
models with wireless or Ethernet network capability, Auto-Off is automatically disabled when the
printer establishes a wireless or Ethernet network connection. Even when Auto-Off is disabled, the
printer enters Sleep mode after 5 minutes of inactivity to help reduce energy use.
You can change the Auto-Off setting from the control panel.
To change Auto-Off setting
1.From the Home screen on the printer display, select Preferences.
NOTE:If you do not see the Home screen, press the Home button.
2.From the Preferences menu, select Auto-Off.
3.From the Auto-Off menu, select On or Off, and then press OK to confirm the setting.
Once you change the setting, the printer maintains the setting.
8 Chapter 2   Get to know the HP ENVY 4500 series ENWW 
						

							3Print
●HP ePrint
●Print documents
●Print photos
●Print Quick Forms
●Print envelopes
●Print with HP wireless direct
●Print using the maximum dpi
●Tips for print success
ENWW9 
						

							HP ePrint
HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime,
from any location. It's as simple as sending an email to the email address assigned to your printer
when you enable Web Services on the printer. No special drivers or software are needed. If you can
send an email, you can print from anywhere, using HP ePrint.
Once you have signed up for an account on HP Connected (www.hpconnected.com), you can sign in
to view your ePrint job status, manage your HP ePrint printer queue, control who can use your
printer's HP ePrint email address to print, and get help for HP ePrint.
HP ePrint allows you to print to your HP ePrint-enabled printer anytime, from any location.
To use HP ePrint, make sure to have the following:
●An Internet- and email-capable computer or mobile device
●An HP ePrint-capable printer on which Web Services has been enabled
NOTE:The email will be printed once it is received. As with any email, there is no guarantee when
or whether it will be received. You can check the print status on HP Connected
(www.hpconnected.com).
NOTE:Documents printed with HP ePrint may appear different from the original. Style, formatting,
and text flow may differ from the original document. For documents that need to be printed with a
higher quality (such as legal documents), we recommend that you print from the software application
on your computer, where you will have more control over what your printout looks like.
TIP:For more information about managing and configuring HP ePrint settings and to learn about the
latest features, visit HP Connected (www.hpconnected.com)
To print using HP ePrint
1.Enable Web Services.
a.From the printer control panel, press the ePrint button.
b.Accept the Terms of Use, and then follow the on-screen instructions to enable Web
Services.
c.Print the ePrint information page, and then follow the instructions on the page to sign up for
an HP ePrint account.
2.On your computer or mobile device, open your email application.
NOTE:For information about using the email application on your computer or mobile device,
see the documentation provided with the application.
3.Create a new email message, and then attach the file that you want to print.
4.Enter the printer's email address in the “To” line of the email message, and then select the
option to send the email message.
NOTE:Do not include any email address in the "Bcc" field; this field is required to be blank. If
there is an email address or printer address in the "Bcc" field, the job will not be printed.
10 Chapter 3   PrintENWW 
						

							To find the printer's email address
1.Press the ePrint button on the control panel. You will see the Web Services Settings menu on
the printer display.
2.Select Display Email Address from the printer display to view the printer’s email address.
TIP:To customize the email address, select Print Info Page from the Web Services Settings
menu on the printer display. The printer prints an information page that contains the printer code
and instructions on how to customize the email address.
To turn off ePrint
1.Press the ePrint button on the control panel. You will see the Web Services Settings menu on
the printer display.
2.Select ePrint from the printer display, and then select Off.
ENWWHP ePrint 11 
						

							Print documents
Load paper
1.Make sure the paper tray is open.
2.Slide the paper-width guides all the open.
3.Place the paper in the paper tray. The side to be printed on should face down.
4.Push the paper into the printer until they stop.
5.Slide the paper-width guides firmly against the edge of the paper.
To print a document
1.From your software, click the Print button.
2.Make sure your printer is selected.
3.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.Click OK to close the Properties dialog box.
6.Click Print or OK to begin printing.
To print on both sides of the page
1.From your software, click the Print button.
2.Make sure your printer is selected.
12 Chapter 3   PrintENWW 
						

							3.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type and print quality from the Media
drop-down list.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.On the Layout tab, select Flip on Long Edge or Flip on Short Edge from the Print on Both Sides
drop-down list.
6.Click OK to print.
NOTE:After one page of the document has been printed, you will be prompted to wait for a
few seconds. Then the printer will automatically load the paper back to print on the other side.
You do not need to manually reload the paper or make any operations.
ENWWPrint documents 13 
						

							Print photos
Load photo paper
1.Make sure the paper tray is open.
2.Slide the paper-width guides all the open.
3.Remove all paper from the paper tray, and then load the photo paper with side to be printed on
facing down.
4.Push the photo papers into the printer until they stop.
5.Slide the paper-width guides firmly against the edge of the photo papers.
To print a photo on photo paper
1.On the File menu in your software, click Print.
2.Make sure your printer is selected.
3.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
NOTE:For maximum dpi resolution, go to Paper/Quality tab, select Photo Paper from the
Media drop-down list, and then select Best in the Quality Settings area. Then click the Advanced
button and select Yes from the Print in Max DPI drop-down list. If you want to print max DPI in
grayscale, select High Quality Grayscale from the Print in Grayscale drop-down list.
5.Click OK to return to the Properties dialog box.
6.Click OK, and then click Print or OK in the Print dialog box.
NOTE:After the printing is finished, remove unused photo paper from the paper tray. Store the
photo paper so it does not start to curl, which could reduce the quality of your printout.
14 Chapter 3   PrintENWW 
						

							Print Quick Forms
Use Quick Forms to print calendars, check lists, games, notebook paper, graph paper, music paper,
and games.
Print Quick Forms
1.Select Quick Forms from the Home screen on the printer display.
TIP:If the Quick Forms option does not appear on the printer display, press the Home button,
and then press the Up and Down buttons until you see Quick Forms.
2.Press the Up and Down buttons to select one of the Quick Forms options. Then press OK.
3.After you have selected the type of form that you want to print, select the number of copies, then
press OK.
ENWWPrint Quick Forms 15 
						

							Print envelopes
You can load one or more envelopes into the paper tray of the HP ENVY 4500 series. Do not use
shiny or embossed envelopes or envelopes that have clasps or windows.
NOTE:For details on how to format text on envelopes, see the help files in your word application.
Load envelopes
1.Make sure the paper tray is open.
2.Slide the paper-width guides all the open.
3.Place the envelopes in the center of the paper tray. The side to be printed on should face down.
The flap should be on the left side.
4.Push the envelopes into the printer until they stop.
5.Slide the paper-width guides firmly against the edge of the envelopes.
To print an envelope
1.On the File menu in your software, click Print.
2.Make sure your printer is selected.
3.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.Click OK, and then click Print or OK in the Print dialog box.
16 Chapter 3   PrintENWW