HP Deskjet F4280 User Manual

Chapter 4 
18 How do I?
How do I?
 

5 Connection information
The HP All-in-One comes equipped with a USB port so you can connect directly to a 
computer using a USB cable. You can also  share the product over an existing home 
network. 
This section contains the following topics: 
•Supported connection types 
•Use printer sharing
Supported connection types
The following table contains a list of supported connection types.
DescriptionRecommended number of connected computers for best performance
Supported softwarefeaturesSetup instructions...

Chapter 5 
20 Connection information
Connection information
 

6 Load originals and load paper
You can load many different types and sizes of paper in the HP All-in-One, including letter 
or A4 paper, photo paper, transparenc ies, business cards, and envelopes. 
This section contains the following topics:
•Load originals 
•Choose papers for printing and copying 
•Load paper
Load originals
You can copy or scan business cards, photo paper, letter- or A4-size originals by loading 
them on the glass.
To load an original on the glass 
1. Lift the lid to the open...

paper types, remember to change the paper type settings. For more information, see Set
the paper type for printing. 
This section contains the following topics: 
•Recommended papers for printing and copying 
•Recommended papers for printing only
•Papers to avoid
Recommended papers for printing and copying
If you want the best print quality, HP recommends using HP papers that are specifically 
designed for the type of project you are printing. If you are printing photos, for example, 
load HP Premium or...

HP All-in-One Paper or HP Printing Paper 
• HP All-in-One Paper is specifically designed for HP All-in-One products. It has an 
extra bright blue-white shade that produc es sharper text and richer colors than 
ordinary multifunction papers. 
• HP Printing Paper is a high-quality multifunction paper. It produces documents that 
look and feel more substantial than documents printed on standard multipurpose or 
copy paper. 
To order HP papers and other supplies, go to www.hp.com/buy/supplies . If prompted,...

NOTE:For a complete list of supported media sizes, see the printer software.
Papers to avoid for all print and copy jobs 
• Any size paper other than those listed in the printer software. 
• Paper with cutouts or perforations (unless specifically designed for use with HP inkjet 
devices). 
• Highly textured stock, such as linen. It might not print evenly, and the ink can bleed 
into these papers. 
• Extremely smooth, shiny, or coated papers not specifically designed for the HP All- 
in-One. They can jam...

To load full-size paper 
1. Pull out the tray extension.
NOTE:When you use legal-size paper, leave the tray extender closed.
2.Slide the paper-width guide to its outermost position.
3.Tap a stack of paper on a flat surface to align the edges, and then check the paper 
for the following: 
• Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack are the same size and type.
Load paper 25
Load originals and load paper
 

4.Insert the stack of paper into the input tray with the short edge forward. Ensure that 
the side you want to print on faces down. Slide the stack of paper toward the product 
until it stops.
CAUTION: Make sure that the product is idle and silent when you load paper 
into the input tray. If the product is servicing the print cartridges or otherwise 
engaged in a task, you could push the paper too far forward, causing the product 
to eject blank pages.
TIP: If you are using letterhead, insert the top of...

To load photo paper in the input tray 
1. Remove all paper from the input tray. 
2. Insert the stack of photo paper into the far-right side of the input tray with the print 
side or glossy si de down and short edge forward. Slide the stack of photo paper 
toward the product until it stops.
TIP: For more help on loading small-size photo paper, refer to the guides 
engraved in the base of the input tray for loading photo paper.
3. Slide the paper-width guide inward until it stops at the edge of the paper....