HP DeskJet F4100 User Manual

CAUTION:If the HP All-in-One still does not turn on, it might have a mechanical failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to: www.hp.com/
support . If prompted, choose your country/region, and then click Contact HP for information 
on calling for technical support.
I connected the USB cable, but I am having problems using the HP All-in-One with 
my computer
Solution: You must first install the software that came with the HP All-in-One before 
connecting the USB cable....

•Check the USB cable. If you are using an older cable, it might not be working properly. Try 
connecting it to another product to see if t he USB cable works. If you experience problems, 
the USB cable might need to be replaced. Also  verify that the cable does not exceed 3 meters (9.8 feet) in length. 
• Check the connection from the HP All-in-One to your computer. Verify that the USB cable is securely plugged into the USB port on the back of the HP All-in-One. Make sure the other 
end of the USB cable...

Setup Guide
The Setup Guide provides instructions for setting up your HP All-in-One and installing software. 
Make sure you follow the steps in the Setup Guide in order. 
If you have problems during setup, see Troubleshooti ng in the last section of the Setup Guide, or 
see  “Troubleshooting and support” on page 7 in this guide.
Onscreen Help
The onscreen Help provides detailed instructions on features of your HP All-in-One that are not described in this guide, including features that  are only available...

c. Plug the power cord back into the HP All-in-One. 
d . Turn on the HP All-in-One by pressing the On button. 
3. Have the following information available: 
a . Specific name of the HP All-in-One, as it appears on the control panel. 
b . Print a self-test report. (For more information, see the User Guide.) 
c . Be prepared to describe your problem in detail. 
d . Have your serial number and service ID ready, found on the self-test report. 
e . Be near the HP All-in-One printer when you call HP Support....

3 Technical information
The technical specifications and international regulatory information for the HP All-in-One are provided in this section.
System requirements
Software system requirements are located in the Readme file.
Paper specifications
• Input tray capacity: Plain paper sheets: Up to 100 (20 lb. paper) 
• Output tray capacity: Plain paper sheets: Up to 50 (20 lb. paper)
NOTE:For a complete list of supported media sizes, see the printer software. For a complete 
list of paper weights, see the...

Warranty
Chapter 3 
14 Technical information
Technical information