HP Deskjet D4360 User Manual

2 Special features
Congratulations! The HP Deskjet is equipped with several exciting features:
•Borderless printing: Use the entire page surface when printing photos and with the
borderless printing feature. For information, see 
Print borderless photos or Print
brochures.
•Six-ink upgradeable printing: Enhance photo printing with a photo print cartridge
(purchased separately). For information, see 
Photo print cartridge.
•Ink-backup mode: Print with one print cartridge. For information, see 
Ink-backup...

3 Get started
•The printer at a glance
•
Buttons and lights
•
Paper trays
•
Print cartridges
•
Ink-backup mode
The printer at a glance
Click the links below to learn about the printer features.
1Buttons and lights
2Front USB port
3Paper trays
1Print cartridges
Get started 9
Get started
 

1USB port
Buttons and lights
Use the printer buttons to turn the printer on and off, cancel a print job, and restart a job.
The printer lights give you visual cues about the status of the printer.
1Power button and light
2Cancel button
3Resume button and light
4Print Cartridge Status lights
5Front USB port lights
Chapter 3
10 Get started
Get started
 

Power button and light
Use the Power button to turn the printer on and off. It can take a few seconds for the
printer to turn on after you press the Power button.
1Power button and light
The Power light flashes when the printer is processing.
CAUTION:Always use the Power button to turn the printer on and off. Using a power
strip, surge protector, or a wall-mounted switch to turn the printer on and off might
cause printer failure.
Cancel button
Use the Cancel button to cancel the current print job....

Resume button and light
The Resume light flashes when an action is required, such as loading paper or clearing
a paper jam. When the problem is solved, press the Resume button to continue printing.
1Resume button and light
Print Cartridge Status lights
The Print Cartridge Status lights and the Ink Level lights offer the status and ink level
information for each print cartridge.
1Ink Level lights
Chapter 3
12 Get started
Get started
 

The Ink Level lights show ink level information for each print cartridge, four for the tri-color
cartridge and four for the black/photo cartridge.
1Tri-color print cartridge light
2Black/Photo print cartridge light
1.The left status light represents the tri-color print cartridge, which is installed in the left
side of the print cartridge carriage.
• The light is on and solid when the tri-color print cartridge is low on ink.
• The light flashes when the tri-color print cartridge needs to be serviced....

Front USB port lights
To transfer photos from a digital camera, external card reader, or USB flash drive, to your
computer, just plug the camera or other device into the printers front USB port. You can
then print the photos using HP Photosmart Software.
1Connection light
2Error light
When the camera is connected correctly, the Connection light is illuminated. The
Connection light blinks green when printing from the camera. If the camera is not set to
the correct mode for downloading photos, the Error...

Unfold the paper trays
To unfold the paper trays
1.Lower the input tray.
2.Lower the output tray.
3.Pull out the output-tray extension.
Paper trays 15
Get started
 

Input tray
The input tray holds paper or other media.
1Input tray
Paper guide
Print on different sizes of media by sliding the paper guide to the right or to the left.
Output tray
Printed pages are deposited in the output tray.
1Output tray
Raise the output tray to load paper or other media. Lower the output tray before printing.
Chapter 3
16 Get started
Get started
 

To prevent paper from falling out of the output tray, pull out both sections of the output-
tray extension. If you are printing in the Fast Draft mode, raise the output-tray extension
stop.
1Second section of output-tray extension
2Output-tray extension stop
Fold the paper trays
To fold the paper trays
1.Remove paper or other media from the paper trays.
2.If the output-tray extension stop is raised, lower it and then push the second section
of the output-tray extension in.
3.Push the first section of the...