HP Designjet Z6200 1067mm Photo User Manual

5.Select your printer and then click the  Page Setup button. The printer properties dialog box
appears.
6. Set the page size and other print options that you want and then click the  OK button. For more
information about print option settings, see 
Print options on page 80 .
Print a color photo with Photoshop CS2
This example uses Adobe Photos hop CS2 under Windows XP. The  color management is done by
Photoshop.
1. Initial recommendations:
●
Select an appropriate paper type for the job.
● The paper type...

4.On the  File menu, select  Open to open the image.
● If the document has an embedded color prof
ile that does not match the current working
space, select  Use the embedded profile . Otherwise, select Assign working space .
If the image colors do not look  right, try assigning it to other color spaces by selecting  Edit >
Assign Profile  (try sRGB , Adobe RGB , ColorMatch RGB  and others) until you are
satisfied.
● Click the  OK button.
5. On the  File menu, select  Print with Preview .
● Select  Page...

Print a draft for revision with the correct scale
Using Adobe Acrobat
1.In the Acrobat window, check the plot size by positioning your cursor near the bottom left corner
of the screen.
2.
Select  File and then select  Print.
NOTE: The page size is  not automatically select ed according to the drawing size.
ENWW Print a draft for revision with the correct scale
125
Printing examples
 

3.To keep the scale, set  Page Scaling to None  (which is not the default setting).
4.Click the  Properties  button.
5.Select the  Document size  and Print Quality you want to use. Click the  Custom button if you
want to define a new custom paper size.
126 Chapter 10   Practical printing examples ENWW
Printing examples
 

6.Click the  Features  tab, and then select  Autorotate.
7.Click the  OK button and check that the print preview  in the Print dialog box looks correct.
8.Click  OK again to print.
Reprint a job with consistent colors
This scenario explains how to get co nsistent colors from print-to-print.
NOTE:HP supports color consistency between print jobs printed wi th the same printer models, using
the same paper type.
Scenario 1
Reprint a job with consistent colors by using the same printer.
ENWW Reprint a job...

To ensure color consistency when reprinting the job, use the same paper type.
1. Check that the color calibration is valid for the p
aper type that is loaded. On the front pane, select
the 
 icon, and then select  View loaded paper . In the Paper information  window,
check that  Color Calibration  is OK . If the status of the Color Calibration is  Pending or
Recommended , perform a color calibration from the HP  Color Center, or on the front panel.
2. Reprint a job: Through the Embedded Web Server, go to...

To ensure color consistency when reprinting the job, use the same paper type.
1. Check that the color calibration is valid 
for the paper type that is loaded in both printers. On the
front panel, select the 
 icon, and then select  View loaded paper . In the Paper
information  window, check that  Color Calibration is OK . If the status of the Color
Calibration is  Pending or Recommended , perform a color calibration from the HP Color
Center, or on the front panel.
2. Print the jobs.
Use ESRI ArcGIS 9 to...

3.Click the  Properties  button and configure the driver as follows.
● On the  Paper/Quality  tab, set Print Quality to  Quality.
● On the  Color tab, clear the  Print In Grayscale  check box, and set Printer managed
colors  to sRGB  in the  Source profile  drop-down menu.
4. Click the  OK button.
5. Select  File > Print.
● Printer Engine : select Windows Printer .
● Output Image Quality (Resample Ratio) : this setting alters the number of pixels that
are sampled when an ArcMap print file is gene rated....

●Click the  Properties  button, select the  HP RTL (RGB) TrueColor  driver, and select the
resolution to be sent to the printer.
● Click the  Color Adjustment  tab if you want to adjust gamma, brightness, contrast, or
saturation. You can  preview the changes.
4.To print, click the  OK button both in this dialog box and in the Print dialog box.
ENWW Use ESRI ArcGIS 9 to print a map
131
Printing examples
 

11 Maintain the printer
●Clean the exterior of the printer
●
Clean the platen
●
Clean the paper-advance sensor window
●
Lubricate the printhead carriage
●
Maintain the ink cartridges
●
Perform preventive maintenance
●
Move or store the printer
●
Update the printer firmware
●
Change the ink absorber
●
Secure disk erase
132 Chapter 11   Maintain the printer ENWW
Maintain the printer