HP Designjet T7100 User Manual

16.Close the paper feed brake. Check that the paper edge is still in the blue zone.
17.Close the roll door.
ENWW Load a roll into the printer
33
Handle the paper
 

18.If the paper that you are using has a barcode 
printed on the leading edge of the roll, and
Printing paper info  is enabled, the printer auto matically reads the information.
If Printing paper info  is enabled and no barcode is detect ed on the roll that is being loaded,
the front panel asks you to ente r the paper type and the length of  the roll you are loading. Select
the paper category and paper type of the roll. If  it is not clear which paper category or paper
type to select, see 
Supported...

4.Wind any trailing paper manually onto the roll.
5. Move the left hub to the left by pressing the blue lever.
6. Remove the roll.
7. Close the roll door.
View information about the paper
On the printers front panel, select the  icon, and then select 
View paper source .
The following information appears on the front panel:
● The roll status
● The paper type that you have selected
● The width of the paper in millimeters (estimated by the printer)
● The length of the paper in millime
ters (estimated by...

To check the paper advance calibration status of the paper, select the  icon, and then select View
loaded paper  > View paper details . The status appears:
● DEFAULT : The default calibration set in the factory  is used. Unless you experience print-quality
problems such as banding or graininess, HP recommends that you do not recalibrate the paper
advance.
● RECOMMENDED : The paper supports automatic advance calibration, but has not yet been
calibrated, or its calibration has become ob solete. HP...

Return to the default calibration
Returning to the default calibration sets all the paper-advance calibration to zero. To return to the
default paper advance-calibration valu e, you must reset the calibration.
1. On the front panel, select the 
 icon, and then select  Image quality maintenance  >
Paper advance calibration  > Reset paper advance .
2. Wait until the front panel shows that the operat
ion has been successfully completed before you
press the  Back button to return to the  Ready screen....

3.Select Change printing properties .
4. Select the paper category.
5. Select the paper type.
6. Choose a drying time from 
the Dry Time drop-down menu.
NOTE:The text box to the right of the drop-down  menu will not display the time in seconds
when the  Automatic  option is selected (it is selected  by default for all paper types). This is
because the  Automatic option means that the printer will  calculate the optimal drying time for
you depending on the temperature at printing ti me, and therefore it...

Store the paper
The following are tips for storing paper:
●Always keep unused rolls wrapped in the plastic 
wrap to prevent discoloration. Rewrap partially
used rolls if they are not being used.
● Do not stack rolls.
● Allow all paper types to adapt 
to room conditions out of the packaging for 24 hours before
printing.
● Handle film and glossy paper by the edges or we
ar cotton gloves. Skin oils can be transferred to
the paper, leaving fingerprint marks.
● Keep the paper tightly wound on the roll...

Table 4-2  Paper (continued)
Paper type g/m² Length WidthPart numbers
HP Heavyweight Coated Paper 131 30.5 m (100 ft) 610 mm (24 in) C6029C (AEJN)
914 mm (36 in) C6030C
1067 mm (42 in) C6569C
67.5 m (225 ft) 1067 mm (42 in) Q1956A (EN)
HP Universal Heavyweight Coated
Paper 120 30.5 m (100 ft) 610 mm (24 in)
Q1412A (AEJN)
914 mm (36 in) Q1413A
1067 mm (42 in) Q1414A (AEJN)
HP Coated Paper * 90 45.7 m (150 ft) 420 mm (16.54 in) Q1443A (J)
594 mm (23.39 in) Q1442A (EJ)
610 mm (24 in)C6019B
841 mm (33.11 in)...

Table 4-2  Paper (continued)
Paper type g/m² Length WidthPart numbers
HP Recycled Bond Paper * 80 45.7 m (150 ft) 420 mm (16.54 in) CG892A (E)
610 mm (24 in)CG889A (EN)
914 mm (36 in) CG890A (EN)
1067 mm (42 in) CG891A (EN)
HP Technical Paper
HP Special Inkjet Paper * 90 45.7 m (150 ft) 610 mm (24 in) 51631D (ELN)
914 mm (36 in) 51631E
HP Natural Tracing Paper * 90 45.7 m (150 ft) 594 mm (23.39 in) Q1439A (J) 610 mm (24 in)C3869A (AE)
914 mm (36 in) C3868A (AE)
HP Translucent Bond Paper * 67 45.7 m (150...

Table 4-2  Paper (continued)
Paper type g/m² Length WidthPart numbers
HP Premium Instant-dry Gloss Photo
Paper 260 30.5 m (100 ft) 914 mm (36 in)
Q7993A
1067 mm (42 in) Q7995A
22.9 m (75 ft) 610 mm (24 in) Q7991A
HP Premium Instant-dry Satin Photo
Paper 260 30.5 m (100 ft) 914 mm (36 in)
Q7994A
1067 mm (42 in) Q7996A
22.9 m (75 ft) 610 mm (24 in) Q7992A
HP Universal Instant-dry Gloss Photo
Paper 190 30.5 m (100 ft) 610 mm (24 in)
Q6574A
914 mm (36 in) Q6575A
1067 mm (42 in) Q6576A
61 m (200 ft) 1067 mm...