HP DesignJet T610 A1 User Manual

Printer sharing considerations
●HP Easy Printer Care must be installed on a computer before it can be used from that computer.
●Any other users sharing your directly connected printer will be able to send print jobs, but will not
be able to receive information from the printer—which affects printer alerts, printer status reports,
paper management, printer administration and troubleshooting.
TIP:The best way to share the printer over a network is to connect the printer not to any computer,
but to the...

NOTE:HP Easy Printer Care and HP Color Center cannot be used with a printer connected
through an HP Jetdirect print server.
4.Follow the instructions on your screen to set up the printer. The following notes help you to
understand the screens and make appropriate choices.
●When asked how the printer is connected, select Wired Networking.
●The configuration program looks for printers connected to your network. When the search is
complete, a list of printers appears. Identify your printer by its IP address...

12.Your printer is now connected. In the Printer Queue Created screen, click Quit to exit, or Create
New Queue if you want to connect another printer.
13.When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
DVD.
Sharing the printer
NOTE:Printer sharing between users is supported under Mac OS X 10.2 and later.
If your computer is connected to a network, you can...

TCP/IP connection
1.Go to your printers front panel and press the Menu key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.Insert the HP Start-Up Kit DVD into your DVD drive.
3.Open the DVD icon on your desktop.
4.Open the Mac OS X HP Designjet Installer icon.
5.Follow the instructions on your screen. You are recommended to use the Easy Install option.
6.The printer software is installed, including the printer driver, HP Printer Utility, and HP Color...

3.Open the Mac OS X HP Designjet Installer icon.
4.Select Uninstall, and follow the instructions on your screen to uninstall the printer software.
ENWW Uninstall the printer software (Mac OS) 15
Installing the software
 

16 Chapter 2   Installing the software ENWW
Installing the software
 

3 Setting up the printer
●Introduction
●
Turn alerts on and off
●
Set Windows driver preferences
ENWW17
Setting up the printer
 

Introduction
This chapter describes various printer settings that the printer administrator may wish to control as soon
as a new printer is assembled and ready for use.
Turn alerts on and off
Printer alerts warn you when there is a printer problem that you can correct by taking action. The alerts
are displayed by the printers front panel, by HP Easy Printer Care under Windows or HP Printer Utility
under Mac OS, and by the printer driver.
You can tell the printer which kinds of alerts you would like to...

4 Personalizing the printer
●Turn the printer on and off
●
Change the language of the front-panel display
●
Access HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS)
●
Access the Embedded Web Server
●
Change the language of HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS)
●
Change the language of the Embedded Web Server
●
Change the sleep mode setting
●
Turn the buzzer on and off
●
Change the front-panel display contrast
●
Change the units of measurement
●
Configure network...

Turn the printer on and off
TIP:The printer can be left powered on without wasting energy. Leaving it on improves response time
and overall system reliability. When the printer has not been used for a certain period of time, it saves
power by going into sleep mode. However, any interaction with the printers front-panel display returns
it to active mode, and it can resume printing immediately. To change the sleep mode time, see 
Change
the sleep mode setting on page 23.
NOTE:In sleep mode, the printer...