HP Designjet T1120ps 1118 mm User Manual

3.Select Paper load.
4.Select Load roll.
5.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 144.
6.Continue with step five of the easy loading process, skipping steps eight and nine.
TIP:When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid this,
catch your prints as they are cut from the roll and do not stack prints in the basket. You can also...

Easy loading procedure
1.Standing behind the printer, rest the spindles black end on the left side roll holder. Do not put the
end completely into the roll holder.
2.Rest the blue end of the spindle on the right side roll holder.
3.With both hands, push the spindle into both roll holders at the same time. The spindle snaps into
place.
ENWW Load a roll into the 44-inch printer 43
Paper handling
 

4.If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll),
pull paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
TIP:Cut the paper as straight as possible, as uneven paper does not load correctly.
5.Insert the edge of the paper into the feeder.
WARNING!Do not push your fingers inside the printers paper path.
6.Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feeds it
automatically...

8.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 144.
9.The printer checks the alignment and measures the width.
10.Look at the front panel; you may find some instructions there.
11.When the roll is aligned, the front panel displays the Ready message and the printer is ready to
print. If the roll is not aligned, follow the instructions on the front-panel display.
NOTE:If you have an...

4.Select Load roll.
5.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 144.
6.Continue with step five of the easy loading process, skipping steps eight and nine.
TIP:When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid this,
catch your prints as they are cut from the roll and do not stack prints in the basket. You can also turn
off the automatic...

Paper menu procedure with paper on the roll
If there is paper on the roll, you can also start the process from the paper menu in the front panels main
menu.
1.
Press the Menu key to return to the main menu, select the Paper menu icon 
.
2.Select Unload paper.
3.Continue from step two of the Unload paper key process.
Roll out of paper procedure
If the end of the paper is no longer attached to the roll use the following procedure.
1.If you have already started the unload process, press the Cancel key on...

Easy loading procedure
1.Standing in front of the printer, open the sheet tray. If the sheet is long, extend the tray.
TIP:If the tray is difficult to open, try opening from behind the printer.
NOTE:The extensions are seven cm and snap in place.
2.Insert the sheet into the feeder. Load your sheet aligned with the load line and insert until the paper
will not continue, with thicker sheets you feel resistance. The printer detects the sheet in three
seconds. A countdown begins on the front-panel display....

6.The printer checks the alignment and measures the sheet.
NOTE:Depending on the length of the sheet, it feeds out the front of the printer.
7.If the paper has been loaded successfully, the front panel displays the Ready message and the
printer ready to print. If the paper is not straight, follow the instructions on the front-panel display.
NOTE:When correctly loaded, the sheet is in the back of the printer.
NOTE:If you have an unexpected problem at any stage of the paper loading process, see The paper...

5.Select your paper category and type.
TIP:If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 144.
6.Continue with step two of the easy loading procedure, skipping steps four and five.
Unload a single sheet
To unload a single sheet after printing, you can simply pull the sheet free from the front of the printer.
To unload a sheet without printing, use the Unload paper key 
 or the paper menu procedure.
Unload paper key procedure...

The following information is displayed on the front panel:
●Roll or sheet status
●Paper manufacturers name
●Paper type you have selected
●Width of the paper in millimeters (estimated)
●Length of the sheet in millimeters (estimated)
●Color calibration status
●Paper advance calibration status
If no paper is loaded, the message Out of paper is displayed.
The same information (apart from the manufacturers name) is displayed by the HP Printer Utility on the
Supplies page.
NOTE:Photo and coated paper requires...