HP Designjet T1120 HD User Manual

If you experience very slow progress while uploading the firmware file to the printer, the reason could
be that you are using a proxy server. In that case, try bypassing the proxy server and accessing the
Embedded Web Server directly.
●In Internet Explorer 6 for Windows, go to Tools > Internet Options > Connections > LAN
Settings, and check the Bypass proxy server for local addresses box. Alternatively, for more
precise control, click the Advanced button and add the printers IP address to the list of...

●Secure Fast Erase: all pointers to the information are erased, and the information itself is also
overwritten with a fixed character pattern. This method is slower than Non-Secure Fast Erase, but
more secure. It may still be possible to access fragments of the erased information by using special
tools to detect residual magnetic traces.
●Secure Sanitizing Erase: all pointers to the information are erased, and the information itself is
repetitively overwritten using an algorithm designed to eliminate any...

134 Chapter 12   Maintaining the printer ENWW
Maintaining the printer
 

13 Accessories
●How to order supplies and accessories
●
Introduction to the accessories
ENWW135
Accessories
 

How to order supplies and accessories
There are two alternative ways to order supplies or accessories for your printer:
●Visit 
http://www.hp.com/go/T1120/accessories on the Web.
●Contact HP Support (see 
Contact HP Support on page 186).
The rest of this chapter lists the available supplies and accessories, and their part numbers.
Order ink supplies
The following ink supplies can be ordered for your printer.
Table 13-1  Ink cartridges
CartridgePart number
HP 72 69 ml Photo Black Ink CartridgeC9397A
HP 72...

●(E) indicates papers available in Europe, the Middle East and Africa
●(J) indicates papers available in Japan
●(L) indicates papers available in Latin America
●(N) indicates papers available in North America
If the part number is not followed by parentheses, the paper is available in all regions.
Table 13-3  Roll paper
Paper typeg/m²LengthWidthPart numbers
HP Bond and Coated Paper
HP Universal Inkjet Bond Paper
80150 ft = 45.7 m23.39 in = 594 mm (A1)Q8003A (AJ)
24 in = 610 mmQ1396A
36 in = 914 mmQ1397A...

Paper typeg/m²LengthWidthPart numbers
HP Heavyweight Coated Paper131100 ft = 30.5 m24 in = 610 mmC6029C (AEJN)
36 in = 914 mmC6030C
42 in = 1067 mmC6569C
225 ft = 67.5 m42 in = 1067 mmQ1956A (EN)
HP Super Heavyweight Plus Matte
Paper210100 ft = 30.5 m24 in = 610 mmQ6626A (AEJN)
36 in = 914 mmQ6627A (AEJN)
42 in = 1067 mmQ6628A (AEJN)
HP Colored Paper Fluorescent
Yellow100150 ft = 45.7 m36 in = 914 mmQ1757A (E)
HP Colored Paper Yellow92150 ft = 45.7 m36 in = 914 mmQ1760A (EN)
295.3 ft = 90 m23.39 in = 594...

Paper typeg/m²LengthWidthPart numbers
HP Premium Plus Photo Gloss28650 ft = 15.2 m24 in = 610 mmQ5488A
HP Premium Plus Photo Satin28650 ft = 15.2 m18 in = 458 mmQ7920A
24 in = 610 mmQ5491A
HP Universal High-Gloss Photo
Paper190100 ft = 30.5 m24 in = 610 mmQ1426A (AEJN)
36 in = 914 mmQ1427A (AEJN)
42 in = 1067 mmQ1428A (AEJN)
HP Universal Semi-Gloss Photo
Paper190100 ft = 30.5 m24 in = 610 mmQ1420A (AEJN)
36 in = 914 mmQ1421A (AEJN)
42 in = 1067 mmQ1422A (AEJN)
HP Photo Paper RC Matte200100 ft = 30.5 m36...

NameProduct number
HP Designjet T1120 24in StandQ6663A
HP Designjet T1120 24in SpindleQ6700A
HP Designjet T1120 44in SpindleQ6709A
HP Jetdirect 620n Fast Ethernet Print ServerJ7934A
HP Jetdirect 625n Gigabit Ethernet Print ServerJ7960G
HP Jetdirect 635n IPv6/IPsec Print Server J7961A
Introduction to the accessories
Stand
The printer stand is used to support the printer and the basket, which collects prints as they emerge
from the printer. The main alternative to the stand is to put the printer on a...

14 Troubleshooting paper issues
●The paper cannot be loaded successfully
●
The paper type is not in the driver
●
The paper has jammed
●
The printer displays out of paper when paper is available
●
Prints do not fall nicely into the basket
●
The sheet stays in the printer when the print has been completed
●
The paper is cut when the print has been completed
●
The cutter does not cut well
●
The roll is loose on the spindle
●
A strip stays on the output tray and generates jams
●
Recalibrate the paper...