HP Designjet T1120 1118 mm User Manual

Print on loaded paper
To print a job on whichever paper is loaded in the printer, select Any in the Paper Type option of your
printer driver.
●In the Windows driver dialog: select the Paper/Quality tab, then select Any in the Paper Type
drop-down list.
●In the Mac OS Print dialog (T1120): select the Paper Type/Quality panel, then select Any in the
Paper Type drop-down list.
●In the Mac OS PS Print dialog (T1120ps): select the Image Quality panel, then select Any in the
Paper Type drop-down list.
NOTE:Any...

Turn the automatic cutter on and off
To turn the printers paper cutter on or off:
●From the HP Printer Utility for Windows, select the Settings tab and change the Cutter option
in Printer Settings > Advanced.
●From the HP Printer Utility for Mac OS, select Configuration > Printer Settings > Configure
Printer Settings and change the Cutter option.
●From the Embedded Web Server, select the Setup tab, then Printer Settings > Advanced, and
change the Cutter option.
●
Press the Menu key to return to the main...

54 Chapter 5   Paper handling ENWW
Paper handling
 

6Printing
●Create a print job
●
Select print quality
●
Select paper size
●
Select margins options
●
Print with shortcuts
●
Rescale a print
●
Change the treatment of overlapping lines
●
Preview a print
●
Print a draft
●
High-quality printing
●
Print in gray shades
●
Print with no margins
●
Print with crop lines
●
Use paper economically
●
Nest jobs to save roll paper
●
Use ink economically
ENWW55
Printing
 

Create a print job
In order to print something, you must send it to the printer. This constitutes a print job, which is entered
into the printers print queue. There are two main ways of sending a print job to the printer:
●To print directly from a program, use the programs Print command as usual. When you select your
HP Designjet printer, the printer driver is invoked to send your job to the printer.
●If you have a file that is already in a supported graphical format, you can use the Embedded Web
Server...

Select print quality
The printer has various print-quality options because best-quality printing requires some loss of speed,
while fast printing implies some reduction in print quality.
Therefore, the standard print-quality selector is a slider that allows you to choose between quality and
speed. With some paper types, you can choose a compromise position between the two.
Alternatively, you can select from the custom options: Best, Normal and Fast. If you select Fast, you
can also select Economode,...

●On the Embedded Web Servers Submit Job page: select Advanced settings > Paper > Page
size > Standard.
●
Using the front panel: select the Setup menu icon 
, then Printing preferences > Paper >
Select paper size.
NOTE:If the paper size is set from your computer, it overrides the paper size setting in the front
panel.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●Under Windows, there are two different ways:
◦In the driver dialog, select Custom from the paper...

●Clip Contents By Margins. Your image will be printed on a page of the size you have selected,
with a narrow margin between the edges of the image and the edges of the paper. In this case, if
the image is the same size as the page, the printer assumes that the extreme edges of the image
are either white or unimportant, and do not need to be printed. This may be useful when your image
already contains a border.
●Borderless. Your image will be printed on a page of the size you have selected, with no...

If you decide later that you no longer want a shortcut, you can delete it.
Rescale a print
You can send an image to the printer at a certain size but tell the printer to rescale it to a different size
(normally larger). This may be useful:
●If your software does not support large formats
●If your file is too large for the printers memory— in this case, you can reduce the paper size in your
software and then scale it up again using the front-panel option
You can rescale an image in the following ways:
●In...

To turn merge on, go to the front panel and select the Setup menu icon , then Printing
preferences > HP-GL/2 > Enable merge. You can set the merge option from your software in some
applications. Settings in your software override the front-panel settings.
Preview a print
Previewing a print on the screen allows you to check the layout of the print before printing, which may
help you to avoid wasting paper and ink on a bad print.
●To preview a print under Windows, you have the following options:
◦Use your...