HP DesignJet 8000s User Manual

							19 Legal information
●Worldwide Limited Warranty—HP Designjet 8000s Printer series
●Regulatory notices
●DECLARATION OF CONFORMITY
Worldwide Limited Warranty—HP Designjet 8000s Printer
series
HP productLimited Warranty Period
Printer1 year (from the date of printer’s purchase by the customer)
Software90 days (from the date of purchase by the customer)
Printhead1 year (from the date of printer’s purchase by the customer)
Ink cartridge3 months from the “Install by” date printed on the product, or
until the genuine HP ink is depleted as indicated by the printer,
whichever occurs first
Wiper Cleaning kit, Cap Cleaning kit, Ink System cleaning kit,
Ink System Storage kitUntil the “Use by” date printed on the product, or until the
genuine HP liquids are depleted as indicated by the printer,
whichever occurs first
A. Extent of HP Limited Warranty
1.This Hewlett-Packard (HP) Limited Warranty gives you, the end-customer, express limited warranty
rights from HP. In addition, you may also have other legal rights under the applicable local law or
special written agreement with HP.
2.HP warrants to you that the HP products specified above will be free from defects in materials and
workmanship during the Limited Warranty Period specified above. The Limited Warranty Period starts
on the date of purchase. Your dated sales or delivery receipt, showing the date of purchase of the
product, is your proof of purchase date. You may be required to provide proof of purchase as a
condition of receiving warranty service. You are entitled to warranty service according to the terms
and conditions of this document if a repair or replacement of your HP Products is required within the
Limited Warranty Period.
3.For software products, HP’s Limited Warranty applies only to a failure to execute programming
instructions. HP does not warrant that the operation of any product will be uninterrupted or error free.
ENWW Worldwide Limited Warranty—HP Designjet 8000s Printer series 211
Legal information
 
						

							4.HP’s limited warranty covers only those defects which arise as a result of use of the HP products as
defined in the user’s guide, and does not apply to any:
a.Improper, inadequate or lack of daily maintenance following the instructions defined in the
Printer’s User’s Guide in Chapter 6;
b.Media crashes due to use of incorrect printhead height for a given media type as described in
the Printer’s User Guide in Chapter 5;
c.Long time power off without following the proper preparation as described in the Printer’s User’s
Guide in Chapter 6;
d.Software, interfacing or parts not provided or supported by HP; or
e.Operation outside the product’s specifications.
Routine printer maintenance operations in the HP Designjet 8000s Printer series, such as cleaning
and preventive maintenance services (including parts contained in any preventive maintenance kit
and HP service engineer visits), are not covered by HP’s Limited Warranty, but in some countries may
be covered under a separate support contract.
5.For HP printer products, the use of a refilled or non-original HP consumable product (ink, printhead,
ink cartridge or media) does not affect either HP’s Limited Warranty to you or any HP support contract
with you. However, if printer failure or damage is attributable to the use of a non-original HP
consumable or refilled ink cartridge, HP will charge its standard time and materials charges to service
the printer for the particular failure or damage.
6.Your exclusive remedies for defective HP products are the following:
a.During the Limited Warranty Period, HP will replace any defective HP software, media, or
consumable product which is covered by this Limited Warranty, and deliver another product to
you to replace the defective one.
b.During the Limited Warranty Period, HP, at its sole discretion, shall either repair on site or replace
any defective hardware product or component part. If HP elects to replace any component part,
HP will provide to you (i) a replacement part, in return for the defective one, and (ii) remote part
installation assistance, if needed.
c.In the unlikely event that HP is unable to repair or replace, as applicable, a defective product
which is covered by this Limited Warranty, HP shall, within a reasonable time after being notified
of the defect, refund the purchase price for the product.
7.HP shall have no obligation to replace or refund until you return the defective media, consumable,
hardware product or component part to HP. All components, parts, consumables, media or hardware
products, removed under this Limited Warranty become the property of HP. Notwithstanding the above
mentioned, HP may waive the requirement for you to return the defective part.
8.Unless otherwise stated, and to the extent permitted by local law, HP products may be manufactured
using new materials or new and used materials equivalent to new in performance and reliability. HP
may repair or replace products (i) with equivalent products to the products being repaired or replaced
but which may have been subject to prior use; or (ii) with equivalent product to an original product that
has been discontinued.
9.THIS LIMITED WARRANTY IS APPLICABLE IN ALL COUNTRIES AND MAY BE ENFORCED IN
ANY COUNTRY WHERE HP OR ITS AUTHORIZED SERVICE PROVIDERS OFFER WARRANTY
SERVICE AND HP HAS MARKETED THIS PRODUCT, SUBJECT TO THE TERMS AND
CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. HOWEVER, WARRANTY SERVICE
AVAILABILITY AND RESPONSE TIME MAY VARY FROM COUNTRY TO COUNTRY. HP WILL NOT
212 Chapter 19   Legal information ENWW
Legal information
 
						

							ALTER FORM, FIT OR FUNCTION OF THE PRODUCT TO MAKE IT OPERATE IN A COUNTRY
FOR WHICH IT WAS NEVER INTENDED TO FUNCTION FOR LEGAL OR REGULATORY
REASONS.
10.Contracts for additional services may be available for any authorized HP service facility where the
listed HP product is distributed by HP or an authorized importer.
11.TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT AS EXPRESSLY SET FORTH IN THIS
LIMITED WARRANTY NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKE ANY OTHER
WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT
TO THE HP PRODUCTS, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A
PARTICULAR PURPOSE.
B. Limitations of liability
1. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY
SET FORTH IN THIS LIMITED WARRANTY, IN NO EVENT SHALL HP OR ITS THIRD PARTY
SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES (INCLUDING ANY LOSS OF PROFITS OR SAVINGS), WHETHER BASED ON CONTRACT,
TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
C. Local law
1.This Limited Warranty gives you specific legal rights. You may also have other rights which vary from
state to state in the United States, from province to province in Canada, and from country to country
elsewhere in the world. You are advised to consult applicable state, province or country laws for full
determination of your rights.
2.To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall
be deemed modified to be consistent with such local law. THE WARRANTY TERMS CONTAINED IN
THIS LIMITED WARRANTY, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT
EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY
RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
Revision: December 5th, 2005
Regulatory notices
You can obtain current Material Safety Data Sheets for the ink systems used in the printer by mailing a
request to this address: Hewlett-Packard Customer Information Center, 19310 Pruneridge Avenue, Dept.
MSDS, Cupertino, CA 95014, U.S.A.
There is also a Web page: 
http://www.hp.com/hpinfo/community/environment/productinfo/psis_inkjet.htm
Regulatory Model Number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is BCLAA-0502.
ENWWRegulatory notices 213
Legal information
 
						

							RMNProduct family
BCLAA-0502HP Designjet 8000 Printer series
BCLAA-0602 HP Designjet 8000s Take-up Reel Kit
The Regulatory Model Number (RMN) should not be confused with the marketing name (HP Designjet
8000s Printer series or HP Designjet 8000s Take-up Reel Kit) or product number.
ELECTROMAGNETIC COMPATIBILITY (EMC)
WARNING!This is a class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
FCC statements (U.S.A.)
The U.S. Federal Communications Commission (in 47 cfr15.105) has specified that the following notices
be brought to the attention of users of this product.
Shielded cables
Use of shielded data cables is required to comply with the Class A limits of Part 15 of the FCC Rules.
CAUTIONPursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
equipment not expressly approved by the Hewlett-Packard Company may cause harmful
interference and void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case users will be required to correct the interference at their own expense.
Normes de sécurité (Canada)
Le présent appareil numérique német pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de Classe A prescrites dans le réglement sur le brouillage radioélectrique édicté par
le Ministére des Communications du Canada.
DOC statement (Canada)
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
214 Chapter 19   Legal information ENWW
Legal information
 
						

							Korean EMI statement
Taiwanese EMI statement
Chinese EMI statement
Sound
Geräuschemission (Germany) LpA < 70 dB, am Arbeitsplatz, im Normalbetrieb, nach DIN45635 T. 19.
ENWWRegulatory notices 215
Legal information
 
						

							DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Supplier’s name:Hewlett-Packard Company
Supplier’s address: Avda. Graells, 501
08174 Sant Cugat del Vallès
Barcelona, Spain
declares that the product
Regulatory Model (3):BCLAA-0502 and BCLAA-0602
Product family:HP Designjet 8000s Printer series and HP Designjet 8000s Take-up Reel Kit
Product options: All
conforms to the following product specifications
Safety:IEC 60950-1:2001 / EN 60950–1:2001
EMC: CISPR 22:1997 +A1:2000 +A2:2002 / EN 55022:98 +A1:2000 +A2:2003 Class A(1)(3)
EN 55024:1998 +A1:2001 +A2:2003
EN 61000-3-2:2000/ IEC 61000-3-2:2000
EN 61000-3-3:1995+A1:2001/ IEC 61000-3-3/A1:2001
FCC Title 47 CFR, Part 15 Class A 
(2) (3)
Additional information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC, and carries the CE marking accordingly.
1.The product was tested in a typical configuration with HP Personal Computer systems and peripherals.
2.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
●This device may not cause harmful interference.
●This device must accept any interference received, including interference that may cause
undesired operation.
3.The product is assigned a Regulatory Model Number which stays with the regulatory aspect of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation
and test reports; this number should not be confused with the marketing name or the product numbers.
216 Chapter 19   Legal information ENWW
Legal information
 
						

							Josep-Maria Pujol
Hardware Quality Manager
Sant Cugat del Vallès (Barcelona)
November 25th, 2005
Local contacts for regulatory topics only
European contact: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, D-71034 Böblingen,
Germany.
United States contact: Hewlett-Packard Company, HPCC, 20555 S.H. 249 Houston, Texas, 77070.
Australian contact: Hewlett-Packard Australia Ltd, Product Regulations Manager, 31–41 Joseph Street,
Blackburn, Victoria, 3130, Australia.
ENWW DECLARATION OF CONFORMITY 217
Legal information
 
						

							218 Chapter 19   Legal information ENWW
Legal information
 
						

							Index
A
accessories
ordering 207
ADJUST menu 188
adjustment patterns 112,  118
adjustment patterns; printhead
position 121
C
cleaning and maintenance
consumables
ordering 206
cleaning kits
ordering 206
components of printer [8000s] 2
connections 11
Customer Care 209
D
Declaration of Conformity 216
Designjet Online 210
E
ecological specifications 203
error messages, operator 138
error messages, service 138
F
form feed 57
front panel, printer 5
G
guarantee 211
H
handling precautions 9
heater control 196
heater menu 193heaters, info 195
HP Customer Care 209
HP Designjet Online 210
I
ink cartridge
ordering 206
ink cartridge expiration 136
ink cartridge replacement 61
ink cartridges 155
INK menu 169
ink system 155
install media 20
L
load sheet media 35
M
M.ADV menu 182
maintenance
ordering consumables 206
media
install 20
loading sheet 35
loading, take-up reel 48
take-up reel, core
adaptors 48
unloading 33
media advance calibration
calibration; media
advance 118
MEDIA menu 169
MEDIA REG menu 170
media types
ordering 206
weights 206
widths 206
media types, default values 182menu
ADJUST 188
INK 169
M.ADV 182
MEDIA 169
MEDIA REG 170
PH. MAIN 184
PH. REC 186
PRINTER 187
SETUP 190
N
nozzle print 112
O
ordering
accessories 207
ink cartridges 206
maintenance and cleaning
consumables 206
media 206
P
PH. MAIN menu 184
PH. REC menu 186
power on/off 14
PRINTER Menu 187
printers main components
[8000s] 2
printhead crash 134
printhead position
adjustment 121
R
regulatory notices 213
S
safety precautions 7
ENWWIndex 219
 
						

							service errors 137
SETUP printer menu 190
specifications
ecological 203
specifications, printer 202
support services
HP Customer Care 209
HP Designjet Online 210
T
take-up reel
core adaptors 48
loading media 48
using 45
winding direction, setting 46
winding mode, setting 47
troubleshooting checklist 132
U
unload media 33
using this guide 2
W
warranty statement 211
waste management 161
220 IndexENWW