HP DesignJet 510 610 mm User Manual

							ANSI paper
The following table lists the printable area for the ANSI paper
 size system. The left and right margins are 0.2 in 
(5 mm) and the leading and trailing edge margins are 0.7 in (17 mm).
Where
: 
Printable areas for ANSI paper
Paper size
Orientation of  paper in printer
Printable area (width × height) by image orientation
Inches
Millimeters
Landscape
Portrait
Landscape
Portrait
Width
Height
Width
Height
Width
Height
Width
Height
A Portrait 9.7 8.1 8.1 9.7 245 206 206 245
Landscape 7.2 10.6 10.6 7.2 182 269 269 182
B Portrait 15.7 10.6 10.6 15.7 398 269 269 398 Landscape 9.7 16.6 16.6 9.7 245 422 422 245
C Portrait 20.7 16.6 16.6 20.7 525 422 422 525 Landscape 15.7 21.6 21.6 15.7 398 549 549 398
D Portrait
32.7
21.6 21.6 32.7
830
549 549 830
Landscape 20.7 33.6
33.6
20.7 525 854
854
525
E Portrait N/A
33.6
42.7 N/A
854
1084
Landscape
32.7
43.6 N/A
830
1108 N/A
Printable area Paper Size Margins –
=
Indicates this printable area is available only if you are using the A0+/E+ size format 
printer
 
						

							Architectural paper
The following table lists the printable area for the Architectural paper
 size system.
The left and right margins are 0.2 in (5 mm) and the leading and trailing edge margins are 0.7 in (17 mm).
Where:
 . 
Printable areas for Architectural paper
Paper size
Orientation of  paper in printer
Printable area (width × height) by image orientation
Inches
Millimeters
Landscape
Portrait
Landscape
Portrait
Width
Height
Width
Height
Width
Height
Width
Height
C Portrait 22.7 17.6 17.6 22.7 576 447 447 576 Landscape 16.7 23.6 23.6 16.7 423 600 600 423
D Portrait
34.7
23.6 23.6 34.7
880
600 600 880
Landscape 22.7 35.6
35.6
22.7 576 904
904
576
E1 Portrait
40.7
29.6
29.6
40.7
1033
752
752
1033
Landscape
28.7
41.6
41.6
28.7
728
1057
1057
728
E Portrait N/A
35.6
46.7 N/A
904
1185
Landscape
34.7
47.6 N/A
880
1209 N/A
Printable area Paper Size Margins –
=
Indicates this printable area is available only if you are using the A0+/E+ size format 
printer
 
						

							ISO paper
The following table lists the printable area for the ISO paper
 size system.
The left and right margins are 0.2 in (5 mm) and the leading and trailing edge margins are 0.7 in (17 mm).
Where:
 
Printable areas for ISO paper
Paper size
Orientation of  paper in printer
Printable area (width × height) by image orientation
Inches
Millimeters
Landscape
Portrait
Landscape
Portrait
Width
Height
Width
Height
Width
Height
Width
Height
A4 Portrait 10.4 7.9 7.9 10.4 263 200 200 263 Landscape 6.9 11.3 11.3 6.9 176 287 287 176
A3 Portrait 15.2 11.3 11.3 15.2 386 287 287 386
Landscape 10.4 16.1 16.1 10.4 263 410 410 263
A2 Portrait 22.0 16.1 16.1 22.0 560 410 410 560 Landscape 15.2 23.0 23.0 15.2 386 584 584 386
A1 Portrait
31.7
23.0 23.0 31.7
806
584 584 806
Landscape 22.0 32.7
32.7
22.0 560 830
830
560
A0 Portrait N/A
32.7
45.4 N/A
830
1154
Printable area Paper Size Margins–
=
Indicates this printable area is available only if you are using the A0+/E+ size format 
printer
 
						

							Roll paperThe following procedures are described in detail, with animations where appropriate:• Installing a new roll on the printer
•Loading roll paper•Unloading roll paper•Removing roll paper from the spindle•Cutter replacement
 
						

							Installing a new roll on the printerThe graphical sequence
 shows how to install a new roll of paper on the printer.
CAUTION:
Make sure the printer wheels are locked (the brake lever on each wheel is pressed Down) to 
prevent the printer from moving.
If you are a regular user of different types of roll paper, you can change the paper quicker if you have more than 
one spindle. This allows you to do the following:
1. Pre-load the different types of paper onto the spindles.
2. Remove and replace the spindle with the new type of paper.
NOTE: Additional spindles are available from Hewlett-Packard as accessories.
 
						

							Loading roll paperThe graphical sequence
 shows how to load a new roll of paper on the printer.
NOTE: You must have installed
 a new roll of paper on the printer before you can load it.
The front-panel menu items are:
Select (using the   keys)  Then press:
1. Paper Enter
2. Load Roll Enter
3. Select Roll Type Enter
 
						

							Unloading roll paperThe graphical sequence
 shows how to unload a roll of paper from the printer.
 
						

							Removing roll paper from the printerThe graphical sequence
 shows how to remove a roll of paper from the printer. 
NOTE: You must have unloaded
 the roll of paper from the printer before you can remove it.
 
						

							Removing roll paper from the spindleThe graphical sequence
 shows how to remove a roll of paper from the roll  spindle
. 
NOTE: You must have removed
 the roll of paper from the printer before you can remove it from the 
spindle.
 
						

							Cutter replacementThe graphical sequence
 shows the complete procedure for the replacement of the paper cutter in your printer.
PrerequisitesBefore attempting to replace the cutter you must contact your local  HP Customer Care
 center to:
• Order the replacement cutter.
• Receive instructions on how to access the front panel Service menu.
Important information• The cutter unit is attached to the printer by a black cutter holder that runs along the metal guide rail, and is  hooked onto the edge of the  platen
 at the front of the printer. 
• The cutting wheel is inside the cutter unit.
• Do not remove the cutter holder.
• When inserting the new cutter, with the cutter holder raised to about 45 degrees, partially insert the cutter so it  rests in the cutter holder, but do  NOT clip it in at this stage. 
CAUTION:
Be very careful when replacing the cutter because you can easily break the cutter holder if you 
apply too much force.