HP Designjet 4520 HD User Manual

If you do not find the media profile you want on the Web, you may find that it has been added to the
latest firmware for your printer. You can check the firmware release notes for information. See 
Update
my printers firmware on page 116.
Use non-HP paper
HPs own paper types have been fully tested with the printer and can be expected to give the best print
quality.
However, you can print on paper from any manufacturer. In that case, you should select (in the front
panel) the HP paper type that is most...

42 Chapter 4   How do I... (paper topics) ENWW
Paper
 

5 How do I... (print job topics)
●Submit a job with the Embedded Web Server
●
Save a job
●
Print a saved job
●
Cancel a job
●
Manage the print queue
●
Nest jobs to save roll paper
●
Unattended printing/overnight printing
ENWW43
Print job
 

Submit a job with the Embedded Web Server
1.Access the Embedded Web Server (see Access the Embedded Web Server on page 17).
2.Go to the Submit job page.
3.Select Add files and browse your computer to select the file to print.
NOTE:Submitting a job to be printed via the Embedded Web Server does not require you to have
the printer driver nor the files native application installed on your computer.
4.If you want to submit more than one file, select the Add files button again and select the file(s) you
want....

You can save a job only while submitting it for printing:
1.Access the Embedded Web Server (see 
Access the Embedded Web Server on page 17).
2.Go to the Submit job page.
3.Browse your computer and select the file to print.
4.If you want to submit more than one file, click the Add another file button to add another file. All
files submitted together will have the same job settings.
NOTE:If you are using Windows and Internet Explorer, you can click the Add files button and
select multiple files at once....

You can select at what point you want to print a file you have in the queue. From the Web server, select
the Settings tab > Device setup > When to start printing; or, from the front panel, select the 
 icon
and then Job management options > When to start printing.
There are three options you can select:
●When After Processing is selected, the printer waits until the whole page has been processed
and then it starts to print. This is the slowest setting but offers the best print quality.
●When Immediately...

You can also do this from the front panel: select the job and choose Copies, then specify the number
of copies required and press the Select key. This overrides any value set by your software.
NOTE:If Rotate was On when you sent the file, every copy will be rotated.
If the job has already been printed, use Move to front to move it to the top of the queue.
Understanding job status
These are the possible job status messages, approximately in the order in which they may be seen:
●receiving: the printer is...

1.Direction of paper flow
2.Nesting off
3.Nesting on
4.Paper saved by nesting
When does the printer try to nest pages?
When the following are true:
●The printer is loaded with roll paper, not sheet paper.
●In the front panels Job Management menu or the Embedded Web Servers Device Setup page,
Nest is On.
●The queue must be set to On.
Which pages can be nested?
All pages can be nested, unless they are so large that two of them cannot fit side by side on the roll, or
unless there are too many of them to fit...

●All pages must be in one or other of the following two groups (the two groups cannot be mixed in
the same nest):
◦HP-GL/2 and HP RTL, CALS G4
◦PostScript, PDF, TIFF, JPEG
●JPEG, TIFF and CALS G4 pages with resolutions greater than 300 dpi may not nest with other
pages in some cases.
How long does the printer wait for another file?
So that the printer can make the best nest possible, it waits after a file has been received to check
whether a subsequent page will nest with it or with pages already in the...

Table 5-1  Recommended settings for unattended printing
Print typePrint modeMaxDetailOptimized forDrying timePaper types
LinesNormalOffLinesOptimalCoated, Bond,
Heavyweight
Coated, Glossy
Lines and fillsNormalOnLinesOptimalCoated, Bond,
Heavyweight
Coated, Glossy
MapsBestOnImagesOptimalCoated,
Heavyweight
Coated, Glossy
Renderings,
photographsBest On Images Optimal Coated,
Heavyweight
Coated, Glossy
50 Chapter 5   How do I... (print job topics) ENWW
Print job