HP Designjet 4520 HD User Manual

NOTE:Each object in QuarkXpress has its own color management. The solid colors use the color
profile and rendering intent selected in the default source profiles for Solid Colors (RGB, CMYK or
Hexachrome) of the Color Management Preferences dialog box. The imported objects have their own
assigned profile and rendering intent. QuarkXPress will use the rendering intent assigned to the image
for both conversions, from the image color space to the simulation color space, and from the simulation
color space...

Get accurate colors from Microsoft Office 2003
Microsoft Office has no color management settings, so the best you can do is to configure the driver
correctly. If you are using the HP-GL/2 and HP RTL driver, click the Properties button and configure the
driver as follows.
●In the Paper/Quality tab, set Print Quality to Best.
●In the Color tab, ensure that the Print In Grayscale box is unchecked, and set Color Matching
Method to sRGB.
Get accurate colors from ESRI ArcGIS 9
ArcGIS is a scalable system of...

2.When you are ready to print, select File > Page and Print Setup, and select the HP-GL/2 and HP
RTL driver.
3.Click the Properties button and configure the driver as follows.
●In the Paper/Quality tab, set Print Quality to Best.
●In the Color tab, ensure that the Print In Grayscale box is unchecked, and set Color
Matching Method to sRGB.
4.Click the OK button.
5.Select File > Print.
●Printer Engine: select Windows Printer (it will use the selected raster driver).
●Output Image Quality (Resample Ratio):...

6.You can print now (click the OK button).
Printing with the ArcPress printer engine
1.You must have the driver you need installed, although it will function only as a port.
2.When you are ready to print, select File > Page and Print Setup, select the driver (the driver
settings have no effect) and click the OK button.
3.Select File > Print.
●Printer Engine: select ArcPress.
●Click the Properties button, select the HP RTL (RGB) TrueColor driver, and select the
resolution that will be sent to the...

●Select the Color Adjustment tab if you want to adjust gamma, brightness, contrast or
saturation. You can preview the changes.
4.You can print now: click the OK button in this dialog box and in the Print dialog box.
ENWW Get accurate colors from ESRI ArcGIS 9 85
Color
 

86 Chapter 8   How do I... (color topics) ENWW
Color
 

9 How do I... (ink system topics)
●Remove an ink cartridge
●
Insert an ink cartridge
●
Remove a printhead
●
Insert a printhead
●
Manage printhead monitoring
●
Recover (clean) the printheads
●
Clean a printheads electrical connections
●
Align the printheads
●
Remove a printhead cleaner
●
Insert a printhead cleaner
●
Check the status of the ink system
●
Get ink cartridge statistics
●
Get printhead statistics
ENWW87
Ink system
 

Remove an ink cartridge
There are two types of ink cartridge removal.
●The ink cartridge is very low and you want to replace it with a full cartridge for unattended printing
(you can use up the remaining ink in the first cartridge at a more convenient time).
●The ink cartridge is empty or faulty, and you must replace it to continue printing.
CAUTION:Do not try to remove an ink cartridge while printing.
CAUTION:Remove an ink cartridge only if you are ready to insert another one.
WARNING!Make sure the...

3.Release the door catch by pressing on the top until it clicks.
4.Pull the door fully open.
5.Grip the blue tab in front of the cartridge you wish to remove.
6.Pull the blue tab down.
ENWWRemove an ink cartridge 89
Ink system
 

7.Then pull it outwards, towards you.
8.The cartridge comes out, in its drawer.
9.Lift the cartridge out of its drawer.
NOTE:Avoid touching the end of the cartridge that is inserted into the printer, as there may be
ink on the connection.
NOTE:Avoid storing partially used ink cartridges on their ends.
10.The front panel display will identify the missing ink cartridge.
90 Chapter 9   How do I... (ink system topics) ENWW
Ink system