HP DesignJet 4500 MFP User Manual
Have a look at the manual HP DesignJet 4500 MFP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
13.Fix the right leg to the cross-brace using two screws on the outer side of the leg.
14.Fix the stand cross-bar using four screws.
15.Position a foot on the left leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
16.Fix the left foot using four screws.
52 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-65.png "Page 66
13.Fix the right leg to the cross-brace using two screws on the outer side of the leg.
14.Fix the stand cross-bar using four screws.
15.Position a foot on the left leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
16.Fix the left foot using four screws.
52 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]")
![Page 67
17.Position a foot on the right leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
18.Fix the right foot using four screws.
19.Turn the stand assembly into an upright position as shown.
20.Open the box containing the roll module. Remove the plastic box containing the screws.
ENWWAssemble the stand 53
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-66.png "Page 67
17.Position a foot on the right leg. There are pins to help you to position the foot correctly.
WARNING!Do not remove the anti-slip material from the wheel.
18.Fix the right foot using four screws.
19.Turn the stand assembly into an upright position as shown.
20.Open the box containing the roll module. Remove the plastic box containing the screws.
ENWWAssemble the stand 53
How do I... (printer
assembly topics) [4500]")
![Page 68
21.Please take note of the colored plugs located on the legs.
22.Remove the blue plug on the left leg.
23.Locate the pin into the left leg.
24.Remove the blue plug on the right leg.
54 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-67.png "Page 68
21.Please take note of the colored plugs located on the legs.
22.Remove the blue plug on the left leg.
23.Locate the pin into the left leg.
24.Remove the blue plug on the right leg.
54 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]")
![Page 69
25.Locate the pin into the right leg.
26.Remove the top yellow plug on the left leg.
27.Locate the pin into the interior of the left leg.
28.Remove the top yellow plug on the right leg.
ENWWAssemble the stand 55
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-68.png "Page 69
25.Locate the pin into the right leg.
26.Remove the top yellow plug on the left leg.
27.Locate the pin into the interior of the left leg.
28.Remove the top yellow plug on the right leg.
ENWWAssemble the stand 55
How do I... (printer
assembly topics) [4500]")
![Page 71
4.Slide drawer 1 out until it touches the foam packaging.
5.Place the stand upside down on top of the printer body. Make sure you position the stand pins
in the holes in the center of the printer body brackets. The anti-slip material should face to the
rear of the printer.
6.Fix the right side of the stand to the printer using one screw. Make sure that the screw is fully
tightened.
ENWWAttach the stand 57
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-70.png "Page 71
4.Slide drawer 1 out until it touches the foam packaging.
5.Place the stand upside down on top of the printer body. Make sure you position the stand pins
in the holes in the center of the printer body brackets. The anti-slip material should face to the
rear of the printer.
6.Fix the right side of the stand to the printer using one screw. Make sure that the screw is fully
tightened.
ENWWAttach the stand 57
How do I... (printer
assembly topics) [4500]")
![Page 73
3.Remove the roll module from the plastic bag.
4.Remove the remaining two yellow plugs from the left and right legs. It is important to remember
the positions of these holes.
5.Turn the roll module over into an inverted position as shown. Then carry it over to the front of
the inverted printer.
6.Rest the roll module next to the first printer crossbar.
1. The rear of the printer.
ENWWAttach the roll module 59
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-72.png "Page 73
3.Remove the roll module from the plastic bag.
4.Remove the remaining two yellow plugs from the left and right legs. It is important to remember
the positions of these holes.
5.Turn the roll module over into an inverted position as shown. Then carry it over to the front of
the inverted printer.
6.Rest the roll module next to the first printer crossbar.
1. The rear of the printer.
ENWWAttach the roll module 59
How do I... (printer
assembly topics) [4500]")
![Page 74
7.Before the roll module is moved into its final position, please note that it should sit on the pins
that were located on the stand legs earlier.
8.With two people lifting the roll module and a third at the rear of the printer, guide the roll module
onto the pins located earlier on the stand.
9.When viewed from the front, make sure that the roll module sits against the legs of the stand.
60 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-73.png "Page 74
7.Before the roll module is moved into its final position, please note that it should sit on the pins
that were located on the stand legs earlier.
8.With two people lifting the roll module and a third at the rear of the printer, guide the roll module
onto the pins located earlier on the stand.
9.When viewed from the front, make sure that the roll module sits against the legs of the stand.
60 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]")
![Page 75
10.Fix the roll module to the right leg of the stand.
11.Fix the roll module to the left leg of the stand.
12.Fix the roll module to the right leg of the stand using two additional screws.
ENWWAttach the roll module 61
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-74.png "Page 75
10.Fix the roll module to the right leg of the stand.
11.Fix the roll module to the left leg of the stand.
12.Fix the roll module to the right leg of the stand using two additional screws.
ENWWAttach the roll module 61
How do I... (printer
assembly topics) [4500]")
![Page 76
13.Fix the roll module to the left leg of the stand using two collar-headed screws.
Set up the printer
1.Place the spare and consumables boxes against the rear of the printer box. The arrows on the
boxes must point towards the printer box. Check that the anti-slip material is still fixed to the two
rear wheels.
2.Using four people, rotate the printer onto the spare and consumables boxes.
62 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]](http://img.usermanuals.tech/thumb/36/36808/w64_HP_DesignJet_4500_MFP-75.png "Page 76
13.Fix the roll module to the left leg of the stand using two collar-headed screws.
Set up the printer
1.Place the spare and consumables boxes against the rear of the printer box. The arrows on the
boxes must point towards the printer box. Check that the anti-slip material is still fixed to the two
rear wheels.
2.Using four people, rotate the printer onto the spare and consumables boxes.
62 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]")
4.Slide drawer 1 out until it touches the foam packaging. 5.Place the stand upside down on top of the printer body. Make sure you position the stand pins in the holes in the center of the printer body brackets. The anti-slip material should face to the rear of the printer. 6.Fix the right side of the stand to the printer using one screw. Make sure that the screw is fully tightened. ENWWAttach the stand 57 How do I... (printer assembly topics) [4500]
7.Slide drawer 1 forwards to gain better access for the front screw. Fix the left side of the stand to the printer using two screws. Make sure that the screws are fully tightened. Attach the roll module Before unpacking the roll module, note that you should handle this piece of equipment using only the points indicated by the green arrows. 1.Open the box containing the roll module, then remove the two foam supports. 2.Remove the roll module from the packaging box. 58 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
3.Remove the roll module from the plastic bag. 4.Remove the remaining two yellow plugs from the left and right legs. It is important to remember the positions of these holes. 5.Turn the roll module over into an inverted position as shown. Then carry it over to the front of the inverted printer. 6.Rest the roll module next to the first printer crossbar. 1. The rear of the printer. ENWWAttach the roll module 59 How do I... (printer assembly topics) [4500]
7.Before the roll module is moved into its final position, please note that it should sit on the pins that were located on the stand legs earlier. 8.With two people lifting the roll module and a third at the rear of the printer, guide the roll module onto the pins located earlier on the stand. 9.When viewed from the front, make sure that the roll module sits against the legs of the stand. 60 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
10.Fix the roll module to the right leg of the stand. 11.Fix the roll module to the left leg of the stand. 12.Fix the roll module to the right leg of the stand using two additional screws. ENWWAttach the roll module 61 How do I... (printer assembly topics) [4500]
13.Fix the roll module to the left leg of the stand using two collar-headed screws. Set up the printer 1.Place the spare and consumables boxes against the rear of the printer box. The arrows on the boxes must point towards the printer box. Check that the anti-slip material is still fixed to the two rear wheels. 2.Using four people, rotate the printer onto the spare and consumables boxes. 62 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
3.Rotate the printer until its rear rests on the spare and consumables boxes and the wheels with the anti-slip material touch the floor. 4.Remove the pallet before trying to lift the printer into an upright position. 5.Using four people and the handholds on the rear of the printer body, carefully lift the printer into an upright position. 6.Rotate the printer into an upright position. The anti-slip material should stop the printer from sliding forwards. ENWWSet up the printer 63 How do I... (printer assembly topics) [4500]
7.Remove the two foam end packs and the plastic covering the printer. 8.Position the left leg cover on the front of the left leg (1), then clip the rear edge (2) into place. 9.Position the right leg cover on the front of the right leg (1), then clip the rear edge (2) into place. 10.Remove the anti-slip material from the two rear wheels on the stand assembly. 64 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]
11.Remove the packing tapes 1 to 12. 12.Open the printer window. Then remove the two window inserts and the ink tube packing material. 13.Remove the protective covering from the printer window and the front panel screen. 14.Open the printhead cleaner door and remove the carriage packing material. Then close the cleaner door. ENWWSet up the printer 65 How do I... (printer assembly topics) [4500]
15.Install the Quick Reference Guide holder. Angle the holder at the top (1), then position the two hooks and clip the lower part (2) to the rear of the printer. 16.Remove the two yellow plastic screws from the right and left side of the paper feed. 17.Remove the two yellow plastic screws from the left and right side of drawer 2. 66 Chapter 3 How do I... (printer assembly topics) [4500] ENWW How do I... (printer assembly topics) [4500]