HP Designjet 111 User Manual

Use ink economically
Here are some recommendations for making economical use of ink.
●For draft prints, use plain paper and select Fast print quality.
●Clean the printheads only when needed, and clean only those printheads that need cleaning.
Cleaning the printheads can be useful, but it uses a small amount of ink.
●Leave the printer permanently turned on so that it can maintain the printheads in good condition
automatically. This regular printhead maintenance uses a small amount of ink. However, if it...

5 Ink-system maintenance
Replace ink cartridges
1.Open the front hinged flap at the right of the printer.
2.Gripping it by its shorter top edges, lift the ink cartridge vertically up and out of the printer.
3.Lower the new ink cartridge into its slot until it clicks into place and is quite secure.
26 Chapter 5   Ink-system maintenance ENWW
Ink maintenance
 

4.Repeat the preceding two steps for each ink cartridge that you wish to replace.
5.Close the outer flap.
Replace printheads
NOTE:After a printhead is replaced, the printer will automatically realign the printheads.
1.Open the front hinged flap at the right of the printer.
2.Open the second (back) part of the flap and lift it right back.
3.The print carriage will move to the left and then back to the right. Wait for it to stop.
4.Pull the printhead cover up and towards you, so that the hook at the front...

5.Lift the small handle at the top front and use it to pull the printhead vertically up and out of the
printer.
6.Take the new printhead and remove the tape that protects its electrical contacts and ink nozzles.
7.Lower the new printhead into place and close its small handle.
28 Chapter 5   Ink-system maintenance ENWW
Ink maintenance
 

8.Push the printhead gently into place, so that it is quite secure.
9.Repeat the preceding four steps for each printhead that you wish to replace.
10.Pull the printhead cover towards you, ensuring that the hook at its front edge latches onto the
tab, and then push it away from you to close the cover.
11.Close the rear part and then the front part of the outer flap.
ENWWReplace printheads 29
Ink maintenance
 

6 Supplies and accessories
Supported paper types
The following paper types are currently provided for use with your printer.
NOTE:This list is likely to change over the course of time. For the latest information, see
http://www.hp.com/go/111/accessories/.
NOTE:Paper types that HP does not support may nevertheless be compatible with your printer.
Key to availability:
●(A) indicates papers available in Asia (excluding Japan)
●(E) indicates papers available in Europe, the Middle East and Africa
●(J)...

Table 6-1  Roll paper (continued)
Paper type g/m² Length Width Part numbers
HP Universal Heavyweight Coated
Paper120 30.5 m (100 ft) 610 mm (24 in) Q1412A (AEJN)
HP Heavyweight Coated Paper 131 30.5 m (100 ft) 610 mm (24 in) C6029C (AEJN)
HP Technical Paper
HP Natural Tracing Paper 90 45.7 m (150 ft) 420 mm (16.54 in) (A2) Q1440A (J)
594 mm (23.39 in) (A1) Q1439A (J)
610 mm (24 in) C3869A
HP Translucent Bond Paper 67 45.7 m (150 ft) 610 mm (24 in) C3860A (AJN)
HP Vellum 75 45.7 m (150 ft) 610 mm (24 in)...

Table 6-2  Sheet paper (continued)
Paper type g/m² Length Width Part numbers
HP Coated Paper 90 610 mm (24 in) 457 mm (18 in) Q1961A (AEJN)
914 mm (36 in) 610 mm (24 in) Q1962A (AEN)
HP Photographic Paper
HP Premium Plus Gloss Photo
Paper280 483 mm (19 in) 330 mm (13 in) Q5486A
610 mm (24 in) 457 mm (18 in) Q5487A
HP Premium Plus Satin Photo
Paper280 483 mm (19 in) 330 mm (13 in) Q5489A
610 mm (24 in) 457 mm (18 in) Q5490A
HP Proofing Paper
HP Professional High-gloss
Contract Proofing Paper200 483 mm (19...

Color Ink cartridge Printhead
Black CH565A, HP 82, 69 ml C4810A, HP 11
Magenta C4837AN, HP 11, 28 ml C4812A, HP 11
Cyan C4836AN, HP 11, 28 ml C4811A, HP 11
Order accessories
The following accessories are available for use with your printer.
●External I/O print server (J4169A)
●Printer stand (Q1246A)
ENWWOrder accessories 33
Supplies
 

7 HP Designjet System Maintenance
The HP Designjet System Maintenance utility provides several facilities that may help to solve printer
problems.
To start HP Designjet System Maintenance under Windows, double-click the HP Designjet System
Maintenance icon on your desktop. Alternatively, you can follow these steps:
1.From the Windows taskbar, select Start > Control Panel > Printers.
2.Right-click your printer’s icon and select Printing Preferences from the pop-up menu.
3.Select the Advanced tab and click...