HP Cp-A52 Users Manual

41
SCREEN menu
SCREEN menu (continued)
ItemDescription
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  
Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER button when the image is...

42
SCREEN menu
SCREEN menu (continued)
ItemDescription
MESSAGE Using the ▲/▼ buttons turns on/off the message function.
TURN ON  ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“Searching…” while searching for the input
“Detecting…” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio...

43
SCREEN menu
SCREEN menu (continued)
ItemDescription
TEMPLATE Using the ▲/▼ buttons switches the mode for the template screen. 
Press the ► button to display the selected template, and press the 
◄ button to close the displayed screen 
(
5).
The last selected template is displayed when the  MY BUTTON 
allocated to the TEMPLATE function is pressed (
 46).
 
TEST PATTERN 
ó DOT-LINE1DOT-LINE4 
ó DOT-LINE3 
ó DOT-LINE2
• To focus the picture, use the FOCUS+/- buttons on the remote 
control while the...

44
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item, 
except for the items LAMP TIME and FILTER TIME. Then 
perform it according to the following table.
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON  ó TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles...

45
OPTION menu
OPTION menu (continued)
ItemDescription
AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote...

46
ItemDescription
MY BUTTON This item is to assign one of the following functions to 
MY BUTTON 
1 and 2 on the remote control (
 6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button 
first. Then using the ▲/▼ buttons sets one of the following functions 
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, C
B/PB, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•  
INFORMATION: Displays...

47
OPTION menu
OPTION menu (continued)
ItemDescription
SERVICE
(continued) FAN SPEED
Using the ▲/▼ buttons the rotation speed of the 
cooling fans. The HIGH is the mode for use at 
highlands etc. Note that the projector is noisier when 
the HIGH is selected.
HIGH  ó NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. 
When the DISABLE is selected, the H/V.POSITION, 
H.SIZE and H.PHASE will be set to the default value 
if the automatic adjustment function is executed. FINE  ó FAST 
ó...

48
OPTION menu
OPTION menu (continued)
ItemDescription
SERVICE
(continued) KEY LOCK
Using  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When 
TURN  ON  is  selected,  the  buttons  on  the  projector  except  the 
STANDBY/ON button are locked.
TURN ON  ó TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
FOCUS LOCK
Use  the  ▲/▼  buttons  turns  on/off  the  focus  lock  feature.    When 
TURN  ON  is...

49
OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  
Use the ▲/▼ buttons on the OPTION 
menu to select SECURITY and press the 
► button. The ENTER PASSWORD box 
will be displayed.  
The factory default PASSWORD is 5310 . 
This PASSWORD can be changed (1.2 Changing the PASSWORD 
 (
...

50
OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY (continued) 1.3 If you have forgotten your PASSWORD
1.3-1  
Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD box.
1.3-2   While the ENTER PASSWORD box is 
displayed, press and hold the  RESET 
button for about 3 seconds or press and 
hold the INPUT and ► buttons on the 
projector for about 3 seconds.
The 10-digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while the Inquiring Code is...