HP Cp-A52 Users Manual

31
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL  ó 4:3 
ó 16:9 
ó 16:10
       
For a Video signal, S-video signal or Component video signal 4:3  ó 16:9 
ó 14:9
     
For no signal 4:3...

32
IMAGE menu
IMAGE menu (continued)
ItemDescription
H POSITION Using the ▲/▼ buttons adjusts the horizontal position.
Left  ó Right
• Over-adjusting the horizontal position may cause noise to appear 
on the screen. If this occurs please reset the horizontal position to 
the default setting. Pressing  RESET button when H POSITION is 
selected will reset H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal, 
or component video signal, the range of this...

33
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV  ó FILM 
ó TURN OFF
     
• This function is performed only for an interlaced signal at the 
VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at  
the...

34
INPUT menu
INPUT menu (continued)
ItemDescription
VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  
Using the ▲/▼ buttons switches the mode 
for video format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM 
      N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal 
from VIDEO port or S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals....

35
INPUT menu
INPUT menu (continued)
ItemDescription
RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can 
be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select 
the resolution you wish to display using 
the ▲/▼ buttons. 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) STANDARD
Pressing the ► or ENTER button when 
selecting...

36
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
D-ZOOM Using the ▲/▼ buttons adjusts the zoom.
Large  
ó  Small
D-SHIFT V Using the ▲/▼ buttons adjusts the vertical picture position.
Up  ó Down
• The function is not available, if the D-ZOOM is adjusted to 100 (full 
screen) on...

37
ItemDescription
PERFECT FIT This item allows you to adjust the shape of the projected image in 
each of the corners.
(1)  
Choose the corner to adjust using 
the ▲/▼/◄/► buttons and press the 
ENTER or INPUT button.
(2)   Use the ▲/▼/◄/► buttons to adjust 
the position of the corner. 
Press the ENTER or INPUT button to 
exit the adjustment of the corner.
(3)    To adjust another corner, follow the  
same procedure from (1) above.   
To reset the adjustment of all the corners, select RESET using 
the...

38
SETUP menu
SETUP menu (continued)
ItemDescription
STANDBY MODE Using ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL  ó SAVING
When SAVING is selected, the power consumption in the standby 
mode is lowered with some functional restriction as below:
• When SAVING is selected, the communication control (RS-232C) 
is disabled except to turn the projector on while the projector is in 
the standby mode.
• When SAVING is selected, AUDIO OUT STANDBY setting of 
AUDIO (
 39)...

39
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
ItemDescription
VOLUME Using the ▲/▼ buttons adjusts the volume.
High  ó Low
SPEAKER Using the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON  ó TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
AUDIO The...

40
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
ENGLISH � FRANÇAIS � DEUTSCH � ESP AÑOL
MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press 
MENU button on...