HP Compaq L5009tm User Guide

							3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Identifying Rear Connectors
Figure 3-1  Rear Connectors
Connector Function
1AC PowerConnects the AC power cord to the monitor.
2USBConnects the touchscreen USB cable to the monitor.
3SerialConnects the touchscreen serial cable to the monitor (not
available on L5009tm model).
4 VGA Connects the VGA video cable to the monitor.
NOTE:A +12VDC input jack is available on the connector panel of the L5009tm monitor. This jack
accepts an external DC power brick (not included with the monitor).
ENWW Identifying Rear Connectors 5
 
						

							Connecting the Cables
NOTE:For the L5009tm model, it is best to install the APR driver before connecting the hardware.
1.Place the monitor in a convenient, well-ventilated location near the computer.
2.Connect one end of the power cable (1) to the AC power connector on the back of the monitor,
and the other end to an electrical wall outlet.
3.L5006tm: Connect one end of the touchscreen serial cable (RS232) or USB cable (2), but not both,
to the rear connector of the computer, and the other end to the connector on the monitor. Tighten
the two thumb screws on the serial cable to ensure proper grounding. The USB cable does not
have thumb screws.
L5009tm: Connect one end of the USB cable to the rear connector of the computer, and the other
end to the connector on the monitor.
NOTE:The L5009tm model does not include a serial connector.
4.Connect one end of the video cable (3) to the rear side of the computer and the other to the VGA
connector on the monitor.
Figure 3-2  Connecting the Power, USB or Serial and VGA Cables
NOTE:Connect either the USB or serial cable to the L5006tm monitor, but not both.
5.Turn on the computer, then press the power button on the side panel to turn the monitor power on.
WARNING!To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
6 Chapter 3   Setting Up the Monitor ENWW
 
						

							Installing the Serial or USB Touch Drivers
The Touch driver software can be downloaded from the Web or from the HP software and documentation
CD included with the monitor.
Downloading Drivers from the Web
1.Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will open
to a menu screen.
2.From the menu screen, select Elo TouchSystems TouchTools.
3.Click Install Driver for This Computer.
4.Click Yes to download the latest drivers from the Elo Website.
5.Select your operating system version for touch drivers from the Elo Driver and File Downloads
page.
NOTE:Depending on whether you connected the USB cable or serial cable, you should install
only the USB driver or serial driver.
6.Refer to the online help file with the software for instructions on configuring and adjusting the
touchscreen.
Installing Drivers from the CD
1.Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will open
to a menu screen.
2.From the menu screen, select Elo TouchSystems TouchTools.
3.Click Browse CD.
4.Browse to the latest version of the EloWinXP Universal directory containing the driver installation
package files.
5.Double-click on EloSetup.exe to run the install application for:
●Serial or USB touchscreen driver (L5006tm)
NOTE:Depending on whether you connected the USB or serial cable, you should install
only the USB driver or serial driver.
●APR USB touchscreen driver (L5009tm)
NOTE:It is best to install the APR driver before connecting the USB cable to the L5009tm
monitor and to the computer. Do not turn off the computer before connecting the USB cable.
There is no APR serial (RS232) driver version available for the L5009tm monitor.
6.Click Next and follow the on screen instructions to complete the touchscreen setup process.
ENWW Installing the Serial or USB Touch Drivers 7
 
						

							Removing the Monitor Stand
If you are mounting the panel to a wall or other mounting fixture, you must remove the monitor stand
from the panel. The monitor has four mounting holes on the back side of the panel that adheres to the
VESA mounting standard.
CAUTION:This monitor supports the VESA industry standard 75mm mounting holes. To attach a third
party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are required (not
provided with the monitor). Longer screws should not be used because they may damage the monitor.
It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard
and is rated to support the weight of the monitor display panel. For best performance, it is important to
use the power and video cable provided with the monitor.
To remove the stand and mount the panel:
1.Turn off the monitor and computer.
2.Disconnect the power, USB or serial and video cables from the monitor and the computer.
3.Lay the monitor face down on a flat surface covered with soft protective cloth.
4.Remove the four screws that secure the stand to the back of the monitor.
5.Follow the instructions from the manufacturer to install the panel to the manufacturer’s mounting
fixture.
6.Reconnect the power, USB or serial and video cables to the monitor and the computer.
7.Turn on the computer, then turn on the monitor.
Mounting the Monitor to a Desktop
The monitor can be screwed down on a desktop or a tabletop to provide security. Four mounting holes
are available on the base of the stand for mounting the monitor.
1.Turn off the monitor and computer.
2.If necessary, disconnect the power, USB or serial and video cables from the monitor and the
computer.
3.Position the monitor on the desk or tabletop.
4.Lift the bezel cover from the base of the stand.
5.Install the screws into the holes provided and replace the bezel cover.
6.Reconnect the monitor cables and turn it on.
8 Chapter 3   Setting Up the Monitor ENWW
 
						

							Tilting the Monitor
For viewing clarity, tilt the monitor forward (up to -5 degrees) or backward (up to 90 degrees).
Figure 3-3  Tilting the Monitor
CAUTION:In order to protect the monitor, be sure to hold the base when adjusting the LCD, and take
care not to touch the screen.
Locating the Rating Labels
The rating labels on the monitor provide the spare part number, product number, and serial number.
You may need these numbers when contacting HP about the monitor model. The rating labels are
located on the rear panel of the monitor display head.
ENWWTilting the Monitor 9
 
						

							4 Operating the Monitor
Installing the Monitor Driver
The CD that comes with the monitor contains monitor driver files you can install on your computer:
●an .INF (Information) file
●an .ICM (Image Color Matching) file
PDF Complete is supplied on this CD and can be installed from the menu.
NOTE:If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP
monitors support Web site. See 
Downloading from the Worldwide Web on page 11 in this chapter.
The Information File
The .INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor
compatibility with the computer’s graphics adapter.
This monitor is Microsoft Windows Plug and Play compatible and the monitor will work correctly without
installing the .INF file. Monitor Plug and Play compatibility requires that the computer’s graphic card is
VESA DDC2 compliant and that the monitor connects directly to the graphics card. Plug and Play does
not work through separate BNC type connectors or through distribution buffers/boxes.
The Image Color Matching File
The .ICM files are data files that are used in conjunction with graphics programs to provide consistent
color matching from monitor screen to printer, or from scanner to monitor screen. The .ICM file contains
a monitor color system profile. This file is activated from within graphics programs that support this
feature.
NOTE:The ICM color profile is written in accordance with the International Color Consortium (ICC)
Profile Format specification.
10 Chapter 4   Operating the Monitor ENWW
 
						

							Installing the .INF and .ICM Files
After you determine that you need to update, you can install the .INF and .ICM files from the CD or
download them.
Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
1.Insert the CD in the computer CD-ROM drive. The CD menu is displayed.
2.View the Monitor Driver Software Readme file.
3.Select Install Monitor Driver Software.
4.Follow the on-screen instructions.
5.Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
NOTE:You may need to install the digitally signed monitor .INF and .ICM files manually from the CD
in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD.
Downloading from the Worldwide Web
To download the latest version of .INF and .ICM files from the HP monitors support Web site:
1.Refer to 
http://www.hp.com/support and select the country region.
2.Follow the links for the monitor to the support page and download page.
3.Ensure the system meets the requirements.
4.Download the software by following the instructions.
Adjusting the Monitor
The monitor will unlikely require adjustment. However, variations in video output and application may
require adjustments to optimize the quality of the display.
For best performance, the monitor should be operating in native resolution, that is 1024 x 768 at 60 -75
Hz. Use the Display control panel in Windows to choose 1024 x 768 resolution. Operating in other
resolutions will degrade video performance.
All adjustments you make to the controls are automatically memorized. This feature saves you from
having to reset your choices every time you unplug or power your monitor off and on. If there is a power
failure, the monitor settings will not default to the factory specifications.
ENWW Installing the .INF and .ICM Files 11
 
						

							Front Panel Controls
Table 4-1  Monitor Front Panel Controls
Control Function
1PowerTurns the monitor on or off.
2SelectSelects the adjustment items from the OSD menus.
3Enter the brightness adjustment.
Decrease value of the adjustment item.
Select item counter-clockwise.
4Enters contrast adjustment.
Increase value of the adjustment item.
Select item.
5 Menu/Exit Displays or exits the OSD menus.
12 Chapter 4   Operating the Monitor ENWW
 
						

							Using the On-Screen Display
Use the On-Screen Display (OSD) to display and select OSD menu functions. To access the OSD, do
the following:
1.Press the Menu button on the side panel to activate the OSD menu.
2.Use the up arrow or down arrow controls to move clockwise or counterclockwise through the menu.
Press the Enter key on the keyboard, the parameter will be highlighted when selected.
3.To quit the OSD screen at any time during the operation, press the Menu button. If the OSD remains
untouched for a short period of time, the OSD automatically disappears.
NOTE:The OSD screen will disappear if no input activities are detected for 45 seconds.
OSD Menu Table
The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.
Settings will be saved automatically after adjustments are made.
Table 4-2  OSD Menu
IconOSD ControlDescription
BrightnessIncreases or decreases brightness.
ContrastIncreases or decreases contrast.
H-PositionAdjusts the position of the screen image left and right.
V-PositionAdjusts the position of the screen image up and down.
PhaseAdjusts the focus of the display. This adjustment allows you to remove any horizontal
noise and clear or sharpen the image of characters.
ClockMinimizes any vertical bars or strips visible on the screen background. Adjusting the
Clock will also change the horizontal screen image.
SharpnessAdjusts the screen image to look sharper or soft.
OSD H-PositionMoves the OSD position horizontally on the screen. When the up arrow button is
pressed, the OSD menu will move to the right side of the screen. Likewise, when the
down arrow button is pressed, the OSD control menu will move to the left side.
OSD V-PositionMoves the OSD position vertically on the screen. When the up arrow button is
pressed, the OSD menu will move to the top side of the screen. Likewise, when the
down arrow button is pressed, the OSD control menu will move to the lower side.
OSD TimeAdjusts the amount of time the OSD menu is displayed.
Color BalancePress the up arrow button or the down arrow button to select 9300, 6500, 5500, 7500
or USER. Only when selecting USER can you make adjustments to the R/G/B (red/
green/blue) content. Press Enter to restore the factory default setting.
Auto-AdjustmentPress Auto to enable this function. The Auto-Adjustment will automatically adjust V-
Position, H-Position, Clock and Clock-Phase.
Recall Defaults Returns the monitor to its default settings.
ENWW Using the On-Screen Display 13
 
						

							IconOSD ControlDescription
OSD LanguageSelects the language in which the OSD menu is displayed.
Information Description Indicates the current resolution, H-Frequency and V-Frequency.
NOTE:When adjusting the Clock and Clock Phase values, if the monitor images become distorted,
continue adjusting the values until the distortion disappears. To restore the factory settings, select the
Recall Defaults menu in the on-screen display.
Identifying Monitor Conditions
Special messages will appear on the monitor screen when identifying the following monitor conditions:
●Out of Range—Indicates the monitor does not support the input signal because the resolution and/
or refresh rate are set higher than the monitor supports.
●No Input Signal—Indicates the monitor is not receiving a video signal from the PC on the monitor
video input connector. Check to determine if the PC or input signal source is off or in the power
saving mode.
●Check Video Cable—Indicates the video cable is not properly connected to the computer.
Power Management System
The monitor is equipped with the power management function which automatically reduces the power
consumption when not in use.
ModePower Consumption
On