HP Color LaserJet CP3505x User Manual

Use features in the Macintosh printer driver
Create and use printing shortcuts in Macintosh
Use printing shortcuts to save the current printer driver settings for reuse.
Create a printing shortcut 1.On the  File menu in the software program, click  Print.
2. Select the driver, and then click  Properties or Preferences .
3. Select the print settings.
4. In the  Printing Shortcuts  box, click Save As... , and type a name for the shortcut.
5. Click  OK.
Use printing shortcuts 1.On the  File menu in the...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the  File menu, click  Print.
2. Open the  Watermarks  menu.
3. Next to  Mode, select the type of watermark to use. Select  Watermark to print a semi-transparent
message. Select  Overlay to print a message that is not transparent.
4. Next to  Pages, select whether to print the watermark on all pages or on the first page only.
5. Next to  Text, select one of the standard...

Print on both sides of the page (duplex printing)
Use automatic duplex printing1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
● For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
2. Open the printer driver (see 
Change printer-driver...

4.If you are using Mac OS X, click Show Advanced Options.
5.Adjust the individual settings for text, graphics, and photographs.
Use the Services menu
If the device is connected to a network, use the Services menu to obtain device and supply-status
information.
1.On the File menu, click Print.
2.Open the Services menu.
3.Select a maintenance task from the drop-down list, and then click Launch. The embedded Web
server opens to the page that provides the information for the task that you selected.
4.To go...

5 Connectivity
●USB configuration
●
Network configuration
ENWW53
 

USB configuration
All printer models support USB connections. The USB port is on the right side of the printer.
Connect the USB cable
Plug the USB cable into the printer. Plug the other end of the USB cable into the computer.
Figure 5-1  USB port connection
1
2
1USB port
2USB connector
54 Chapter 5   Connectivity ENWW
 

Network configuration
The HP Color LaserJet CP3505n, CP3505dn, and CP3505x models support network connections. The
network port is on the right side of the printer.
Connect the network cable
Plug the network cable into the printer.
Figure 5-2  Network port connection
1
2
1Network port
2Network cable
Configure the network product
You might need to configure certain network parameters on the printer. You can configure these
parameters from the printer control panel, the embedded Web server, or for most...

8.Press  to highlight  MANUAL, and then press .
9. Press 
 to highlight  MANUAL SETTINGS , and then press .
10. Press 
 to highlight  IP Address: , and then press .
11. Press the 
 or  arrow to increase or decrease the number for the first byte of the IP address.
12. Press 
 to move to the next set of numbers. (Press  to move to the previous set of numbers.)
NOTE: To cycle through the numbers faster, hold down the arrow button.
13.Repeat steps 10 and 11 until the correct IP address is entered, and then...

7.Press  to select  CONFIG METHOD .
8. Press 
 to highlight  MANUAL, and then press .
9. Press 
 to highlight  MANUAL SETTINGS , and then press .
10. Press 
 to highlight  DEFAULT GATEWAY , and then press .
11. Press the 
 or  arrow to increase or decrease the number for the first byte of the default
gateway.
12. Press 
 to move to the next set of numbers. (Press  to move to the previous set of numbers.)
13. Repeat steps 10 and 11 until the correct default gateway is entered, and then press 
 to save...

5.Press  to highlight  APPLETALK , and then press .
6. Press 
 to select  ENABLE.
7. Press 
 to highlight  OFF, and then press .
8. Press  Menu to return to the  Ready state.
Disable DLC/LLC 1.Press  Menu.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  I/O, and then press .
4. Press 
 to highlight  EMBEDDED JETDIRECT , and then press .
5. Press 
 to highlight  DLC/LLC, and then press .
6. Press 
 to select  ENABLE.
7. Press 
 to highlight  OFF, and then press .
8....