HP Color LaserJet CP3505x User Manual

7 Use product features
●Sleep Delay and Sleep Mode features
●
Manage stored jobs
ENWW79
 

Sleep Delay and Sleep Mode features
The SLEEP DELAY  feature determines how long the printer must be inactive before it switches to sleep
mode to reduce power consumption. You can set the length of time before the printer goes into sleep
mode to one of the following settings:
● 1 MINUTE
● 15 MINUTES
● 30 MINUTES
 (the default setting)
● 45 MINUTES
● 60 MINUTES
● 90 MINUTES
● 2 HOURS
● 4 HOURS
NOTE:
The printer display appears dimmed when the printer is in sleep mode. Sleep mode does not
affect printer...

Manage stored jobs
NOTE:This feature is available only for printers with installed hard drives.
To store print jobs on the printer, use the  Job Storage tab in the printer driver  Properties dialog box.
After a job is stored, you can print it or delete it from the printer control panel.
Print a stored job 1.Press  Menu.
2. Press 
 to highlight  RETRIEVE JOB , and then press .
A list of users appears. If no jobs are stored , then the message  NO STORED JOBS appears.
3. Press 
 to highlight your user...

82 Chapter 7   Use product features ENWW
 

8 Print tasks
●Media type and tray loading
●
Access the printer driver
●
Control print jobs
●
Cancel a print job
●
Use different paper and print covers
●
Print a blank first page
●
Use watermarks
●
Create and use printing shortcuts in Windows
●
Resize documents
●
Set a custom paper size from the printer driver
●
Print on both sides of the paper (duplex printing)
●
Print multiple pages on one sheet of paper in Windows
●
Setting the color options
●
Using the HP Digital Imaging Options dialog box
●
Use the...

Media type and tray loading
Minimum media dimensions are 148 x 210 mm (5.83 x 8.27 inches).
Maximum media dimensions are 216 x 356 mm (8.5 x 14 inches).
Table 8-1  Tray 1 media information
Media typeMedia specificationsMedia quantityDriver settingsPaper orientation
Paper and cardstock,
standard sizesRange:
60 g/m
2 (16 lb) bond to
163 g/m2 (43 lb) bond
Maximum stack height:
10 mm (0.6 inch)
Equivalent to 100
sheets of 75 g/m
2 (20
lb) bond.
Plain or unspecifiedN/A
EnvelopesLess than 60 g/m2 (16
lb) bond...

Media typeMedia
specificationsMedia quantityDriver settingsPaper orientationOutput
(tray 2), or 200
sheets (tray 3)
Glossy Range:
106 g/m
2 (28 lb)
bond to 120 g/m2
(32 lb) bondMaximum stack
height: 100 sheets
(tray 2), or 200
sheets (tray 3)Light glossy,
glossy, or heavy
glossySide to be printed
on facing up 
Table 8-2  Tray 2, tray 3, and tray 4 media information (continued)
ENWW Media type and tray loading 85
 

Access the printer driver
For information about opening the printer driver, see Change printer-driver settings for Windows
on page 38.
86 Chapter 8   Print tasksENWW
 

Control print jobs
In Windows, three settings affect how the printer driver pulls media when you send a print job. The
Source, Type , and  Size settings appear in the  Page Setup, Print , or Print Properties  dialog boxes in
most software programs. If you do not change these settings, the printer automatically uses the default
printer settings to select a tray.
CAUTION: Make printer setup changes through the software program or the printer driver whenever
possible, because changes that you make at the...

Cancel a print job
You can stop a print request by using the printer control panel or using your software program. For
instructions on how to stop a print request from a computer on a network, see the online Help for the
specific network software.
NOTE:It can take some time for all printing to clear after you have canceled a print job.
Cancel the current print job fr om the printer control panel
1.Press  Stop on the printer control panel.
2. Press 
 to highlight  Cancel Current Job , and then press  to...