HP Color LaserJet 3600dn User Manual

To disable or enable the Sleep Mode feature
1.Press  Menu.
2. Press 
 to highlight  CONFIGURE DEVICE, and then press .
3. Press 
 to highlight  RESETS, and then press .
4. Press 
 to highlight  SLEEP MODE , and then press .
5. Press 
 or  to select  ON or OFF , and then press  to set the selection.
6. Press  Menu to return to the  Ready state.
Display Brightness feature
Change the brightness of the cont rol-panel display by using the DISPLAY BRIGHTNESS option.
To set the Display Brightness feature...

5.Press  or  to select the appropriate personality, and then press  to set the personality.
6. Press  Menu to return to the Ready state.
Clearable Warnings feature
NOTE This feature is available for  the HP Color LaserJet 3000 and 3800 Series printers only.
Use this feature to determine the display time of  control-panel clearable warnings by selecting ON or
JOB . The default value is JOB .
● ON
: Clearable warnings appear until you press 
.
● JOB
: Clearable warnings appear until the end of the job for...

Replace Supplies feature
The printer has three options for low or exhausted supplies status:
●STOP AT OUT
 (the default setting): The printer continues printing while a print cartridge is low.
When the cartridge is out, the printer cannot print.
● STOP AT LOW
: The printer pauses until you replace the low cartridge.
● OVERRIDE AT OUT
: The printer continues printing even  after some supplies have run out.
To set the Replace Supplies feature
1.Press  Menu.
2. Press 
 to highlight  CONFIGURE DEVICE, and...

Language feature
The option to set the default language might appear when the printer is turned on for the first time,
depending on the country/region in which you purchased the printer. As you scroll through the available
options, the list appears in the language that is highlighted. When the list appears in the appropriate
language, press 
 to set the language. You can also change the language at any time by performing
the following procedure.
To select a language
1. Press  Menu.
2. Press 
 to...

Using the printer control panel in shared environments
If your printer is shared with other users, adhere to the following guidelines to ensure successful printer
operation:
● Consult your system administrator before making changes to control-panel settings. Changing
control-panel settings coul
d affect other print jobs.
● Coordinate with other users before changing the 
default printer font or downloading soft fonts.
Coordinating these operations conserves memory and avoids unexpected printer output.
●...

42 Chapter 2   Control panelENWW
 

3 I/O configuration
This chapter describes how to configure certain network parameters on the printer.
●
USB configuration
●
Network configuration
ENWW 43
 

USB configuration
All printer models support USB connections. The USB port is on the right side of the printer.
Connecting the USB cable
Plug the USB cable into the printer. Plug the other end of the USB cable into the computer.
1
2
Figure 3-1  USB port connection
1USB port
2USB connector
44 Chapter 3   I/O configuration ENWW
 

Network configuration
You might need to configure certain network parameters on the printer. You can configure these
parameters from the printer control panel, the em bedded Web server, or for most networks, from the
HP Web Jetadmin software.
NOTE For more information about using the embedded Web server, see Using the embedded
Web server .
For a complete list of supported networks and for in structions on configuring network parameters from
software, see the HP Jetdirect Embedded Print  Server...

4.Press  to highlight  EMBEDDED JETDIRECT , and then press .
5. Press 
 to highlight  TCP/IP, and then press .
6. Press 
 to select CONFIG METHOD .
7. Press 
 to highlight  MANUAL, and then press .
8. Press 
 to highlight  MANUAL SETTINGS, and then press .
9. Press 
 to highlight  SUBNET MASK , and then press .
10. Press the 
 or  arrow to increase or decrease the number  for the first byte of the subnet mask.
11. Press 
 to move to the next  set of numbers. (Press  to move to the previous set of...