HP Color LaserJet 3000 User Manual
Here you can view all the pages of manual HP Color LaserJet 3000 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 121
7 Maintenance This chapter describes ways to maintain your printer. The following topics are covered: ● Managing supplies ● Replacing supplies and parts ● Cleaning the printer ENWW 107
Page 122
Managing supplies Using, storing, and monitoring print cartridges can help ensure quality printer output. Supplies life The life of the print cartridge depends on usage patterns and the amount of toner that print jobs require. For example, when printing text at 5 percent coverage , an HP print cartridge lasts an average of 4,000 or 6,000 pages, depending on the printer model. (A typical business letter is about 5 percent coverage.) Cartridge life expectancy is reduced by frequently prin ting many 1- or...
Page 123
12 3 Figure 7-1 Printer display 1Message/Prompt area 2Supplies gauge 3Print cartridge colors from left to right: black, yellow, cyan, and magenta For more precise levels, follow the instructions in the table below to print a supplies status page. DeviceProcedure Printer control panel1.Press Menu. 2. Press to highlight INFORMATION , and then press . 3. Press to highlight PRINT SUPPLIES STATUS PAGE , and then press to print the supplies status page. HP Easy Printer Care SoftwareIn the Overview...
Page 124
HP print cartridges When you use a genuine new HP print cartridge, you can obtain the following supplies information: ●Percentage of supplies remaining ● Estimated number of pages remaining ● Number of pages printed Non-HP print cartridges Hewlett-Packard Company cannot recommend use of non-HP print cartridges, either new or remanufactured. Because they are not genuine HP products, HP cannot influence their design or control their quality. Service or repair that is required as a result of using a...
Page 125
Replacing supplies and parts Carefully follow the guidelines in this section when replacing printer supplies. Supply replacement guidelines To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the printer. ● Sufficient space is required above and in the front of the printer for removing supplies. ● The printer should be located on a flat, sturdy surface. For instructions on installing supplies, see the installation guides provided with each supply item or...
Page 126
To change the print cartridge 1.Open the front door. CAUTION Do not place anything on the transfer un it and do not touch the transfer unit, which is located on the inside of the front door. 2. Remove the used print cartridge from the printer. 3.Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling. 112 Chapter 7 Maintenance ENWW
Page 127
4.Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge from side to side. CAUTION Do not touch the shutter or the surface of the roller. 5.Remove the orange shipping locks and the shipping tape attached to the left shipping lock from the new print cartridge. Discard the shipping tape and shipping locks according to local regulations. 6.Align the print cartridge with the tracks inside th e printer, and using the handles, insert the print cartridge until...
Page 128
7.Firmly close the front door. After a short time, the control panel should display Ready. 8. Installation is complete. Place the used print cartri dge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions. 9. If you are using a non-HP print cartridge, check the printer control panel for further instructions. For additional help, see the Web sites listed in Supply replacement guidelines . 114 Chapter 7 Maintenance ENWW
Page 129
Cleaning the printer During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems, su ch as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems. To clean the printer using the printer control panel 1.Press Menu. 2. Press to highlight CONFIGURE DEVICE, and then press . 3. Press to highlight PRINT QUALITY , and then press . NOTEIf your printer has...