HP Color LaserJet 2605dn User Manual

7Photo
NOTE This section applies only to the HP Color LaserJet 2605dtn printer.
Use the following instructions to perform photo-related tasks:
●
Inserting a memory card
●
Changing memory card default settings
●
Changing memory card settings for the current job
●
Printing photos directly from the memory card
●
Printing a memory card index
ENW W 69
 

Inserting a memory card
The HP Color LaserJet 2605dtn printer can read the following memory-card types:
●CompactFlash
● Memory Stick and Memory Stick PRO
● MultiMedia
● Secure Digital (SD)
● SmartMedia
● xD
NOTE
The HP Color LaserJet 2605dtn memory card reader recognizes only files in .JPEG
file format when printing from the printer control panel. To print other file types, you must use
the software, such as HP Image Zone, provided on the CD-ROMs that came with the printer.
See the software online Help...

The printer reads the card, and then the printer control panel displays X Photos found on card,
where  X is the number of recognized .JPEG files found on the memory card.
Now you can use the HP Color LaserJet 2605dtn to print photos.
NOTE You can use only one memory card in the printer at a time. If two or more are
inserted, the printer displays an error message. For more information about memory-card
messages, see 
Control panel messages .
NOTEThe HP Color LaserJet 2605dtn recognizes memory cards up to...

Changing memory card default settings
The HP Color LaserJet 2605dtn printer comes with default settings that were set at the factory. You
can change the default settings for photo printing from the printer control panel.
NOTEThe default settings remain as selected until you change and save them again. If you
want to change the settings temporarily for a particular photo-printing job, see 
Changing
memory card settings for the current job .
1.
Press  (Select ).
2. Use the 
 (Left arrow ) or  (Right arrow...

Changing memory card settings for the current job
1.Insert the memory card into the printer. The  Photo functions menu displays.
2. Press 
 (Select ) to select  Print photos  and then press  (Select ).
3. Use the 
 (Left arrow ) or  (Right arrow ) button to select  Job settings and then press 
(Select ).
4. Use the 
 (Left arrow ) or  (Right arrow ) button to make selections for each of the following
menu items, and then press 
 ( Select ).
● Image Size
: Change the size of the image that you are...

Printing photos directly from the memory card
To print photos directly from the memory card, complete the following steps:
1.Insert the memory card into the printer. See 
Inserting a memory card. The  Photo functions
menu displays.
2. Use the 
 (Left arrow ) or  (Right arrow ) button to select  Print photos and then press 
(Select ).
3. Use the 
 (Left arrow ) or  (Right arrow ) button to select  Select Photos and then press 
(Select ).
4. Use the 
 (Left arrow ) or  (Right arrow ) button to select one...

Printing a memory card index
1.Insert the memory card into the printer. See Inserting a memory card. The  Photo functions
menu displays.
2. Use the 
 (Left arrow ) or  (Right arrow ) button to select  Index print and then press 
(Select ).
3. Use the 
 (Left arrow ) or  (Right arrow ) button to select either  Best or Fast , and then press
 (Select ).
4. Press 
 (Select ) again to confirm the print job.
The printer prints an index that includes small preview images for each photo on the memory
card. Each...

76 Chapter 7   PhotoENW W
 

8Networking
This section provides information about using your printer on a network.
●
Set up the printer and use it on the network
●
Managing the network
●
Using the printer control panel
●
Supported network protocols
●
TCP/IP
●
Troubleshooting
NOTE Configuring TCP/IP settings are complicated and should only be performed by
experienced network administrators. BOOTP will require a (PC, Unix, Linux, and so on) server
to configure specific TCP/IP settings for the product. DHCP will also require a server,...

Set up the printer and use it on the network
Hewlett-Packard recommends that you use the HP software installer on the CD-ROMs that came
with the printer to set up printer drivers for the following network setups.
To configure a network port-connected printer configuration
(direct mode or peer-to-peer printing)
In this configuration, the printer is connected directly to the network, and all computers on the
network print directly to the printer.
NOTEThis mode is the recommended network configuration for...