HP 7 Plus Instruction Manual

Reverse this procedure to install the system board.
System board
25 

6 Specifications
 Metric U.S.
Dimensions
Width12.2 cm4.8 in
Depth0.8 cm0.3 in
Height19.3 cm7.6 in
Weight (lowest weight configuration)0.3 g0.7 lb
Input power
The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be
rated at 100—240 V, 50/60 Hz.
NOTE:The tablet can operate on DC power using an industry-standard micro-A or micro-B USB cable. The HP 5V 2A
adapter included with your tablet is recommended for charging the tablet.
Temperature...

7 Statement of Volatility
The purpose of this document is to provide general information regarding non-volatile memory in
industry-standards based HP Business Notebook PC systems and provide general instructions for
restoring nonvolatile memory that can contain personal data after the system has been powered off and
the hard drive has been removed.
HP Business Notebook PC products that use Intel-based or AMD®-based system boards contain volatile
DDR memory. The amount of nonvolatile memory present in the...

f.If an Automatic DriveLock password is set, select the Security menu, scroll down to
Automatic DriveLock, then select the desired hard drive and disable protection. Repeat
this procedure if more than one hard drive has an Automatic DriveLock password.
g.Select the File menu, then Reset BIOS Security to factory default. Click yes at the
warning message.
h.Select the File menu, then Save Changes and Exit.
i.Reboot the system. If the system has a Trusted Platform Module and/or fingerprint sensor, one
or...

Non-volatile memory usage
Non Volatile
Memory
TypeAmount
(Size)Does this
memory
store
customer
data?Does this
memory
retain data
when power
is removed?What is the
purpose of
this
memory?How is data
input into
this
memory?How is this
memory
write
protected?
Real Time Clock
(RTC) battery
backed-up
CMOS
configuration
memory
(CMOS)256 Bytes No Yes Stores system
date and time
and limited
keyboard
controller data.Using the F10
Setup utility or
changing the
Microsoft
Windows date
and time.This memory is
not...

Non Volatile
Memory
TypeAmount
(Size)Does this
memory
store
customer
data?Does this
memory
retain data
when power
is removed?What is the
purpose of
this
memory?How is data
input into
this
memory?How is this
memory
write
protected?
System BIOS 4 to 5 MBytes Yes Yes Store system
BIOS code and
PC
configuration
data.System BIOS
code is
programmed at
the factory.
Code is
updated when
the system BIOS
is updated.
Configuration
data and
settings are
input using the
F10 setup utility
or a custom
utility.A utility...

Non Volatile
Memory
TypeAmount
(Size)Does this
memory
store
customer
data?Does this
memory
retain data
when power
is removed?What is the
purpose of
this
memory?How is data
input into
this
memory?How is this
memory
write
protected?
Bluetooth flash 2 MBits No Yes Stores Bluetooth
configuration
and firmware.Programmed at
the factory.
Tools for writing
data to this
memory are not
publicly
available but
can be
obtained from
the silicon
vendor.A utility is
required for
writing data to
this memory
and is made...

Questions and answers
1.How can the BIOS settings be restored (returned to default settings)?
a.Turn on or restart the computer and press F10 when prompted near the bottom of the display.
b.Select File, then select Restore defaults.
c.Follow the on-screen instructions.
d.Select File, save changes and exit, then press Enter.
2.What kind of configuration data is stored on the DIMM Serial Presence Detect
(SPD) memory module? How would this data be written?
The DIMM SPD memory contains information about the...

8 Power cord set requirements
The wide-range input feature of the tablet permits it to operate from any line voltage from 100 to 120
volts AC, or from 220 to 240 volts AC.
The 3-conductor power cord set included with the tablet meets the requirements for use in the country or
region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the tablet is used.
Requirements for all countries
The following requirements...

Country/region Accredited agency Applicable note number
Germany VDE 1
Italy IMQ 1
Japan METI 3
The Netherlands KEMA 1
Norway NEMKO 1
The Peoples Republic of China COC 5
South Korea EK 4
Sweden CEMKO 1
Switzerland SEV 1
Taiwan BSMI 4
The United Kingdom BSI 1
The United States UL 2
1.The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or...