HP 5500 Ei 5500 Si Switch Series Configuration Guide

 228 
     VRID           : 1               Adver Timer  : 1 
     Admin Status   : Up              State        : Master 
     Config Pri     : 110             Running Pri  : 110 
     Preempt Mode   : Yes             Delay Time   : 0 
     Auth Type      : None 
     Virtual IP     : 10.1.1.10 
     Virtual MAC    : 0000-5e00-0101 
     Master IP      : 10.1.1.1 
   VRRP Track Information: 
     Track Object   : 1               State : Positive   Pri Reduced : 3\
0 
# Display detailed information about...

 229 
   VRRP Track Information: 
     Track Object   : 1               State : Negative   Pri Reduced : 3\
0 
# After shutting down the uplink interface on Switch A, display detailed information about VRRP 
group 1 on Switch B. 
[SwitchB-Vlan-interface2] display vrrp verbose 
 IPv4 Standby Information: 
     Run Mode       : Standard 
     Run Method     : Virtual MAC 
 Total number of virtual routers : 1 
   Interface Vlan-interface2 
     VRID           : 1               Adver Timer  : 1 
     Admin...

 230 
Index 
A B C D E H I M R S T V  
A 
Activating an RRPP domain,67 
As

sociating the track module with a detection 
module, 202 
As

sociating the track module with an application 
module, 204 
A

vailability evaluation, 1 
A

vailability requirements, 1 
B 
BFD o

verview, 19 3 
C 
CFD c

onfiguration example, 29 
CFD conf

iguration task list, 20 
CFD o

verview, 16 
C

onfiguration guidelines, 19 2 
C

onfiguring a Smart Link device,10 0  
C

onfiguring an associated device,10 4  
C

onfiguring...

 231 
S 
Setting DLDP mode,43 
S

etting the delaydown timer, 44 
S

etting the interval to send advertisement packets, 43 
S

etting the port shutdown mode, 44 
Smar

t Link configuration examples, 10 5 
Smar

t Link configuration task list, 10 0 
Smar

t Link overview, 97 
S

tateful failover configuration example, 191 
St

ateful failover overview, 18 8 
T  T

rack configuration examples,
208 
T

rack configuration task list,201  
Tr

ack  ove r view, 200 
Tr

ou b l es ho o ti n g, 96 
T...

 
i  
Contents 
Using ping, tracert, an d system debugging ··················\
··················\
··················\
··················\
············· ··················\
········ 1 
Ping ··················\
··················\
··················\
··················\
··················\
··················\
··················\
···················\
··················\
··················\
  1 
Using a ping command to test network connectivity ··················\
··················\
··················\...

 
ii  
Default output rules of  system information ··················\
··················\
··················\
··················\
············ ··················\
···· 35 
System informat ion format ··················\
··················\
··················\
··················\
··················\
··········· ··················\
············· 36 
Information center conf iguration task list ··················\
··················\
··················\
··················\
············ ··················\...

 
iii  
Configuring the RMON histor y statistics function ··················\
··················\
··················\
··················\
······ ················ 73 
Configuring the RMON  alarm function ··················\
··················\
··················\
··················\
··················\
· ··················\
·········· 74 
Displaying and ma intaining RMON ··················\
··················\
··················\
··················\
··················\
····· ··················\...

 
iv  
Configuring  DNS tests ··················\
··················\
··················\
··················\
··················\
··············· ··················\
············· 110 
Configuring FTP tests ··················\
··················\
··················\
··················\
··················\
··············· ··················\
················ 111 
Configuring HTTP tests ··················\
··················\
··················\
··················\
··················\
··············...

 
v  
Enabling IPC performa nce statistics ··················\
··················\
··················\
··················\
··················\
· ··················\
·············· 152 
Displaying and maintaining IPC  ··················\
··················\
··················\
··················\
··················\
··················\
··················\
···  153 
Configuring PoE ··················\
··················\
··················\
··················\
··················\
··················\
···...

 
vi  
Manually collecting to pology information ··················\
··················\
··················\
··················\
·············· ··················\
 177 
Enabling the cluster function ··················\
··················\
··················\
··················\
··················\
······· ··················\
··········· 177 
Deleting a member switch from a cluster  ··················\
··················\
··················\
··················\
··················\
················  177...