HP 2310e User Guide

Using the On-Screen Display (OSD)
Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1.If the monitor is not already on, press the Power button to turn on the monitor.
2.To access the OSD menu, press the Menu button. The OSD Main Menu displays.
NOTE:You need to touch the bar area on the front panel to display the front panel button
icons.
3.To navigate through the Main or sub-menu, press the + (Plus) button on the monitors...

Icon Main Menu Options Sub-menu Options Description
    sRGB Sets your screen colors to adapt to the
color standards used in the image
technology industry.
  Quick View Select from the following modes:
Movie
Photo
Gaming
Text
Custom (settings saved when you adjust
the Brightness, Contrast, or Color in one
of the other Quick View options)
  Custom Color Selects and adjusts your own color
scales:
R — Sets your own red color levels.
G — Sets your own green color levels.
B — Sets your own blue color levels....

Icon Main Menu Options Sub-menu Options Description
  OSD Transparency Adjust to view the background
information through the OSD.
  OSD Timeout Sets the time in seconds that the OSD is
visible after the last button is pressed.
The factory default is 30 seconds.
Management   Selects the power-management features
of the monitor.
  Power Saver Enables the power saving feature (see
Power-Saver Feature on page 20).
Select:
On
Off
The factory default is On.
  Power-On Recall Restores power to the monitor...

Icon Main Menu Options Sub-menu Options Description
  DDC/CI Support Allows the computer to control some
OSD menu features such as Brightness,
Contrast, and Color Temperature.
Select:
On
Off
The factory default is On.
  Bezel Power LED Turns the light (LED) in the Power
button on and off. When set to off, the
light will remain off at all times.
  Rear Logo LED Turns the light (LED) on the rear logo on
and off. When set to off, the light will
remain off at all times.
  Sleep Timer Provides the...

Icon Main Menu Options Sub-menu Options Description
Source Control   Selects the video input signal. the
factory default by priority is DisplayPort,
DVI, then HDMI.
    DVI Selects DVI as the video input signal.
    HDMI (2310e model) Selects HDMI as the video input signal.
    DisplayPort Selects DisplayPort as the video input
signal.
  Default Source Selects the default or primary video
input signal when the monitor is
connected to two active and valid video
sources. The monitor will automatically...

●Check Video Cable — Indicates a video input cable is not properly connected to the computer
or monitor.
●OSD Lockout — The OSD can be enabled or disabled by pressing and holding the Menu button
on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout
appears for 10 seconds.
If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
●Dynamic Contrast Ratio ON...

A Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the
recommended solutions:
Problem Solution
Power LED is not on. Make sure the Power button is on, and the power cord is properly connected to a grounded
power outlet and to the monitor.
Select Management in the OSD menu, and then select Bezel Power LED. Check if the
Bezel Power LED option is set to Off and, if so, set to On mode.
Screen is blank. Connect the power cord. Turn on...

Problem Solution
No Plug and Play. In order for the Plug and Play feature of the monitor to work, you need a computer and
graphic card that are compatible with Plug and Play. Check with your computer
manufacturer.
Check the monitors video cable, and make sure that none of the pins are bent.
Make sure that the monitor drivers are installed. Refer to 
Installing Drivers on page 13 for
more information. Monitor drivers are also available at: 
http://www.hp.com/support.
Picture bounces, flickers, or
wave...

Locating the Rating Label
The rating label on the monitor provides the product number and serial number. You may need these
numbers when contacting HP about your monitor model.
The rating label is on the back of the monitor.
ENWWLocating the Rating Label 23
 

B Technical Specifications
All specifications represent the typical specifications provided by HPs component manufacturers;
actual performance may vary either higher or lower.
HP LCD Monitors
Table B-1  2310e/2310ei Specifications
Specifications  
Display Type: TFT LCD active matrix
Viewable Image Size: 58.42 cm (23.0 in.) diagonal
Video Input Terminals: 2310ei: DisplayPort, DVI; 2310e: DisplayPort, DVI, HDMI
Tilt: -5° to +25°
Maximum Weight (unpacked): 4.3 kg (9.5 lb)
Dimensions (h x w x d): 415.9 x...