HP 2310e User Guide

Cleaning the Monitor
1.Turn off the monitor and unplug the power cord from the back of the unit.
2.Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.
3.For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.
CAUTION:Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen
surface. Never spray the cleaner directly on the screen surface. It may run behind the bezel and
damage the electronics.
CAUTION:Do not use...

3 Setting Up the Monitor
Unpacking the Monitor
1.Unpack the monitor. Make sure all contents are included. Store the packing box.
2.Turn off the computer and other attached devices.
3.Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing
the monitor screen-down while preparing it for installation.
Assembling the Monitor
Place the monitor in a convenient, well-ventilated location near your computer. Connect the monitor
cables after you have assembled the...

2.Slide the pedestal into the slot on the base (1) and tighten the large screw on the bottom of the
base (2) to secure the pedestal to the base.
Figure 3-1  Assembling the Base and Pedestal
3.Slide the monitor panels hinge bracket into the opening on top of the pedestal. The panel will
click into place when fully inserted.
Figure 3-2  Inserting the Monitor Panel
ENWWAssembling the Monitor 7
 

Connecting Monitor Cables
CAUTION:Before connecting cables to the monitor, ensure that the computer and monitor are
powered off.
The video source is determined by the video cable used. The monitor will automatically determine
which inputs have valid video signals. The inputs can be selected by pressing the source button on
the front panel.
Connecting the DVI-D Video Cable
Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D
video connector on the computer....

Connecting the DisplayPort Video Cable
Connect one end of the DisplayPort Digital Input cable to the back of the monitor and the other end
connector to the input device. A DisplayPort Digital Input cable is provided on select models only.
Figure 3-4  Connecting the DisplayPort Cable (cable provided on select models only)
Connecting the HDMI Cable (2310e Model Only)
Connect one end of the HDMI cable to the back of the monitor and the other end connector to the
input device. An HDMI cable is provided on...

Connecting the Power Cord
1.Follow all electrical and power warnings
WARNING!To reduce the risk of electric shock or damage to your equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature. Plug the power cord into a grounded (earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into is easily accessible to the
operator and located as close to the equipment as possible. A power cord should be routed so
that it is not...

Turning on the Monitor
1.Press the power button on the computer to turn it on.
2.Press the power button on the front of the monitor to turn it on.
CAUTION:Burn-in image damage may occur on monitors that display the same static image on
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that may occur on...

2.Adjust the tilt by moving the top edge of the monitor either toward or away from you, without
touching the screen.
Figure 3-7  Tilt Adjustment
Adjusting the Swivel
The monitor allows a usable range of motion with the swivel feature.
Figure 3-8  Swivel Adjustment
CAUTION:To avoid breakage or other damage, avoid applying pressure to the LCD screen while
swiveling it or changing the tilt.
12 Chapter 3   Setting Up the Monitor ENWW
 

4 Operating the Monitor
CD Software and Utilities
The CD that is included with this monitor contains drivers and software that you can install on your
computer.
Installing Drivers
If you determine that you need to update the drivers, you can install the monitor driver INF and ICM
files from the CD, or download them from the Internet.
Installing the monitor driver software from the CD
To install the monitor driver software from the CD:
1.Insert the CD in your computer CD drive. The CD menu appears....

Front-Panel Controls
Control buttons are located on the bottom right of the monitor. The buttons are represented by icons
that become illuminated when the bar area on the front panel is touched.
Button Icon Description
Source
Chooses the video input source from the computer.
Quick View
Opens the OSD Quick View menu where you can select a viewing mode.
Minus
Navigates down through the OSD menu and decreases adjustment levels.
Plus
Navigates up through the OSD menu and increases adjustment levels.
OK...