Honeywell series TouchCenter Keypads 6271 User Manual

							Maintaining Your System (Contd) 
61 
 
Routine Care 
• Treat the components of your security system as you would any 
other electrical equipment. Do not slam sensor-protected doors or 
windows. 
• Keep dust from accumulating on the keypad and all protective 
sensors, particularly on motion sensors and smoke detectors. 
The keypad case and sensors should be carefully dusted with a dry 
soft cloth. Do not spray water or any other fluid on the units. 
SCREEN ACTION 
4.  Press the CLEAN SCREEN button.  A 
pop-up window displaying “Touch Screen 
will be disabled so that you may wipe 
the screen clean. Please use a damp, 
soft cloth. DO NOT use any liquids, 
sprays, or ammonia-based cleansers. 
Press CONTINUE to disable 
touchscreen.  
W hen the Continue button is pressed the 
“Touch Screen Disabled for => 30 
Seconds” message is displayed. During 
these 30 seconds the touch screen should 
be wiped clean of fingerprints using a mild 
soap solution and a soft cloth.  When the 
counter reaches zero, the window 
automatically closes and the touch screen 
is active. 
Note: Do not spray cleaning agent directly 
on the screen, spray it on cloth then wipe 
surface area.  
						

							 
62 
Glossary  
The following terms are used throughout the guide. 
Arm/Disarm: “Armed” simply means that the burglary portion of 
your system is turned ON and is in a state of readiness. “Disarmed” 
means that the burglary system is turned OFF, and must be rearmed 
to become operational. However, even in a “disarmed” state, 
“emergency”, carbon monoxide and “fire” portions of your system 
are still operational. 
Bypass: To intentionally leave a specific zone unprotected while the 
rest of the system is armed. 
Console Emulation: Console Emulation Mode allows you to use a 
TouchCenter interface just as you would a regular system keypad.  
All commands shown in Console Emulation mode can also be 
executed from a standard alpha keypad. 
Day/Night Zone: An area of protection whose violation causes a 
trouble indication during the disarmed (DAY) mode and an alarm 
during the armed (NIGHT) mode. 
Delay Zone: An area of protection containing doors most frequently 
used to enter or exit (typically, a front door, back door, or door from 
the garage into the building). The delay zone allows sufficient time 
for authorized entry or exit without causing an alarm. Consult your 
installer for the entry and exit delay times that have been set for your 
system during installation and record them on the separate sheet 
provided in this guide. 
Home Screen: The screen that is normally displayed on the 
TouchCenter when entries are not being made. The TouchCenter will 
return to this screen when the “Home” button is pressed or when an 
entry is not received for a pre-set period of time. 
Keypad: This is the device through which you operate your system.  
It contains graphical buttons. These graphical buttons control the 
arming or disarming of the system, and perform other functions that 
were previously described in this manual. 
Lighting Button: A button on the Home screen that allows you to 
control lights or other devices if so programmed by your system 
installer.  
						

							Glossary (Contd) 
63 
Master Code:  A 4-digit code that gives users access to all of the 
system’s functions, including the ability to program other users in the 
system. See also “User Code.” 
Message Button: A graphical button on the Home screen that allows 
you to record and retrieve voice messages. (6271V and 6271CV Only) 
Night: An arming mode for the system. Your system installer set the 
type of arming and the zones armed when using this mode. 
Partition: An independent group of zones that can be armed and 
disarmed without affecting other zones or users. 
User Code: A 4-digit code that gives users access to the system’s 
basic functions. See also “Master Code.” 
Zone: A specific protection point (e.g., door or window). 
  
						

							 
 
ONE YEAR LIMITED WARRANTY 
Honeywell International Inc., acting through its Sec urity & Custom Electronics business  (Seller), 2 Corporate Center Drive, Melville, NY 11747, warrants its s ecurity equipment (the product) to be free from def ec ts in materials and workmanship for one year from date of original purchas e, under normal us e and s ervic e. Sellers obligation is limited to repairing or replacing, at its option, free of charge f or parts, labor, or transportation, any product proven to be def ective in materials or workmans hip under normal use and s ervic e. Seller shall have no obligation under this warranty or otherwis e if the product is altered or improperly repaired or s ervic ed by anyone other than the Seller. In cas e of def ec t, c ontac t the s ec urity prof essional who installed and maintains your s ecurity equipment or the Seller for product repair. 
This one year Limited W arranty is in lieu of  all other express warranties, obligations  or liabilities. THERE ARE NO EXPRESS W ARRANTIES, W HICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED W ARRANTIES, OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION W ITH THIS PRODUCT, INCLUDING ANY IMPLIED W ARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERW ISE, ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR BREACH OF ANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED W ARRANTY OF MERCHANTABILITY, MUST BE BROUGHT W ITHIN 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER W ARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF  LIABILIT Y W HATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLERS OW N NEGLIGENCE OR FAULT. Some states do not allow limitation on how long an implied warranty lasts or the exc lusion or limitation of incidental or c ons equential  damages, s o the above limitation or exc lusion may not apply to you. 
Seller does not repres ent that the product may not be c ompromis ed or circ umvented; that the product will prevent any pers onal injury or property loss by burglary, robbery, fire or otherwis e; or that the product will in all c as es provide adequate warning or protection. Buyer understands that a properly installed and maintained alarm may only reduc e the risk  of a burglary, robbery, fire or other events occurring without providing an alarm, but it is not insuranc e or a guarantee that such will not occur or that there will be no pers onal injury or property loss as a res ult. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILIT Y FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE W ARNING. HOW EVER, IF SELLER IS HELD  LIABLE, W HETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED W ARRANTY OR OTHERW ISE, REGARDLESS OF CAUSE OR ORIGIN, SELLERS MAXIMUM LIABILIT Y SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, W HICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty gives you specific legal rights, and you may als o have other rights which vary from state to state. No increas e or alteration, written or verbal, to this warranty is authorized. 
ÊK6249V3sŠ 
K6249V3 3/09  Rev. A 
 
2 Corporate Center Drive, Suite 100 
P.O. Box 9040 
Melville, NY 11747 
Copyright © 2009 Honeywell International Inc. 
www.honeywell.com/security