Honeywell Hrhd 9 User Manual

Troubleshooting
Document 900.0856
 Rev B141
02/08
F
Troubleshooting
Table F-1 Troubleshooting
Problem Possible Solution
No Power  Check power cord connections.
 Confirm that there is power at the outlet.
No Live Video  Check camera video cable and connections.
 Check monitor video cable and connections.
 Confirm that the camera has power.
 Check camera lens settings.
Live Video very bright If a cable is attached to the Loop connector, make certain it is 
connected to a properly terminated device.
DVR has...

Troubleshooting
142 

Connector Pin Outs
Document 900.0856
 Rev B143
02/08
G
Connector Pin Outs
I/O Connector Pin Outs
AI (1 to 16) Alarm Inputs 1 to 16
GND Chassis Ground (9 connectors)
AO (1 to 16) Alarm Outputs 1 to 16
ARI Alarm Reset In 

Connector Pin Outs
144
RS485 Connector Pin Outs
Master Unit Slave Unit
+ 
! To ! TX+
– 
! To ! TX–
+ 
! To ! RX+
– 
! To ! RX– 

Map of Screens
Document 900.0856
 Rev B145
02/08
H
Map of Screens 

Map of Screens
146 

System Log Notices
Document 900.0856
 Rev B147
02/08
I
System Log Notices
Boot Up Schedule On
Shutdown Schedule Off
Restart Panic On
Upgrade Panic Off
Upgrade Fail Clear All Data
Power Failure Clear Disk
Time Change Format Disk
Time Zone Change Disk Full
Time Sync Auto Deletion
Time Sync Fail Search Begin
Disk Bad Search End
Login Clip-Copy Begin
Logout Clip-Copy End
Setup Begin Clip-Copy Cancel
Setup End Clip-Copy Fail
Remote Setup Change Callback Fail
Remote Setup Fail Print Begin
Setup Imported Print...

System Log Notices
148 

Error Code Notices
Document 900.0856
 Rev B149
02/08
J
Error Code Notices
System Upgrade Related
Number Description
0 Unknown error
1 File version error
2 Operating system version error
3 Software version error
4 Kernel version error
100 Upgrade device mounting failed
101 Package is not found
102 Extracting package failed
103 LILO failed
104 Rebooting failed
105 Invalid package
106 ODD firmware upgrade failed
300 Remote connection failed
301 Remote network error
302 Remote upgrade is not authorized
303...

Error Code Notices
150
Clip Copy Related
Number Description
0 Unknown error
1 Device error
2 Mounting failed
3 No media
4 Invalid media
5 File already existed
6 Not enough space
7 Creating temporary file failed
8 Opening disk failed
9 Formatting disk failed
10 Database has been changed
11 Appending failed
12 Bad sector
13 No executable file
14 Opening executable file failed
15 Writing executable file failed
16 Creating image failed
17 Burning failed
18 Burning is out of time
22 Verify failed