Honeywell control panel VISTA50P Security System User Manual

 
 
– 41 – 
Using #70 Relay Menu Mode 
General Information 
Your system may be set up so that certain lights or other devices can be 
turned on or off by using the #70 command from either a keypad or a 
telephone keypad (if 4285 or 4286 VIP module is used). Ask your installer if 
this has been done in your system. 
To activate relays from a keypad, enter 4-digit security code + [#] +70. 
Follow the keypad prompts described below. 
To activate relays using a telephone and 4285 or 4286 VIP module, 
first...

 
 
– 42 – 
Using Schedules 
Delaying the Closing Time 
Your system’s programmed schedules may automatically arm the system at a 
predetermined time. In the event a user must stay on the premises later than 
usual, users with master or manager authority levels can manually delay the 
automatic arming (closing) time up to 2 hours. To delay the closing time: 
1.  Enter your security code (master or manager authority levels only). 
2. Press the  # 
 key, followed by 82. 
3.  A menu prompt will be displayed,...

 
 
– 43 – 
Using Schedules (cont’d) 
Programming Temporary Schedules 
Temporary schedules only affect the partition from which it is entered. 
Temporary schedules can be reused at later dates simply by scrolling (by 
pressing #) to the DAYS? prompt (described below) and activating the 
appropriate days. This should be considered when defining daily time 
windows. Note that only users with authority level of manager or higher can 
program temporary schedules. 
To program temporary schedules: 
1.  Enter...

 
 
– 44 – 
Using Schedules (cont’d) 
DAYS ?   MTWTFSS 
HIT 0-7  X   X 
This is the prompt that actually activates the 
temporary schedule, and allows the temporary 
schedule to be customized to a particular week’s 
needs. To select the days which are to be 
activated, enter the desired number 1-7 (Monday 
= 1). An X will appear under that day, 
indicating the previously entered schedule for 
that day is active. Entering a day’s number again 
will deactivate that day.  Pressing 0 will turn all 
days...

 
 
– 45 – 
Programming Device Timers 
General Information 
Device timers consist of an ON time & an OFF time, and selected days of the 
week in which they are active. There are up to 20 timers that can be used to 
control various devices, such as lights or appliances. Your installer will have 
programmed the appropriate devices into the system (up to 16 devices can be 
programmed).  
Each timer controls a single device (designated as an output number) that 
you select. For example, timer 1 might be set...

 
 
– 46 – 
Programming Device Timers (cont’d) 
 
00 ON TIME ? 
00:00 PM 
Enter the time you want the device turned on 
using 00:01 - 11:59 format. When the display 
shows the desired time, press the * key to move 
to the AM/PM field. Press any key 0-9 to change 
the AM/PM indication. 
Enter 00:00 if this timer is not being used to turn 
something ON for the days selected below. (ex. 
using one timer to turn lights on one day and 
using another timer to turn them off on another 
day). 
00 OFF TIME ?...

 
 
– 47 – 
Event Log Procedures 
General Information 
The system has the ability to record 
various events in a history log wherein 
each event is recorded in one of five 
categories (listed below), with the time and 
date of its occurrence. The Event Log holds 
up to 224 events, with the oldest event 
being replaced by the logging of any new 
event after the log is full. Using an alpha 
keypad, the Event Log can be viewed one 
category at a time, or can display all 
events, regardless of category (ALL...

 
 
– 48 – 
Event Logging Procedures (continued) 
4. Use the [3] & [1] keys (for next and 
previous categories respectively) to 
display the categories of events. 
Press [8] to select a category and 
display the first event. Press [8] again 
for each subsequent event. 
Shows burglary alarm occurred in zone 
3 (C03) of partition 1 (P1), at 12:02AM 
on January 1. 
P1 01/01  12:02AM 
BURGLARY C003 Typical 
Event Log 
Display 
After the last event has been 
displayed, the END OF EVENT LOG 
message appears...

 
 
– 49 – 
Testing The System (To Be Conducted Weekly) 
Using the   5  TEST Key 
The TEST key puts your system into Test mode, which allows each 
protection point to be checked for proper operation. 
1.  Disarm the system and close all protected windows, doors, etc. READY 
should be displayed. 
  TEST 
2.  Enter your security code and press the  5  key. 
3.  The external sounder should sound for 3 seconds and then turn off.  If the 
sounder does not sound, it may be due to dialer communication activity....

 
 
– 50 – 
Fire Alarm System 
Your fire alarm system (if installed) is on 24 hours a day, providing 
continuous protection.  In the event of an emergency, the smoke and heat 
detectors automatically send signals to your Control, triggering a loud 
interrupting sound from the keypad and the optional exterior sounders.  
FIRE appears at your keypad and remains on until you silence the alarm. 
In Case Of Fire Alarm 
1.  Should you become aware of a fire emergency before your detectors sense 
the problem,...