Home > Honeywell > Control panel > Honeywell control panel VISTA20SE Security System User Manual

Honeywell control panel VISTA20SE Security System User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Honeywell control panel VISTA20SE Security System User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							– 11 –
    ABOUT THE KEYPADS
    Fixed-Word Keypad Displays
    AWAYAll burglary zones, interior & perimeter, are
    armed.
    STAYPerimeter burglary zones, such as protected
    windows and doors, are armed.
    INSTANTPerimeter burglary zones armed and entry delay
    is turned off.
    BYPASSOne or more burglary protection zones have been
    bypassed.
    NOT READYAppears when burglary portion of the system is
    not ready for arming (due to open protection
    zones).
    READYThe burglary portion of the system is ready to be
    armed.
    NO ACAppears when AC power has been cut off.
    System is operating on backup battery power.
    ACAppears when AC power is present.
    CHIMEAppears when the CHIME feature is activated.
    BATLow battery condition in a wireless sensor
    (if zone number is displayed) or low system
    battery (if no zone number is displayed).
    00ALARM
    CHECK
    FIRE
    AWAY
    STAY
    INSTANT
    BYPASS
    NO AC
    CHIME
    BAT
    NOT READY
    0000
    STYLE ASTYLE B
    FIXED-WORD KEYPAD
     DISPLAYS
    ALARMAppears when an intrusion has been detected and the system is armed (also appears during
    a fire alarm or audible emergency alarm). Accompanied by the protection zone in alarm.
    CHECKAppears when a malfunction is discovered in the system at any time or if an open circuit is
    detected in a FIRE zone at any time or a fault in a DAY/NIGHT burglary zone during a
    disarmed period. Accompanied by a display of zone number in trouble.
    FIREAppears when a fire alarm is present. Accompanied by a display of the zone in alarm. 
    						
    							– 12 –
    FUNCTIONS OF THE KEYPADS
    1.ALPHA DISPLAY WINDOW: A 1-line or 2-line, Liquid
    Crystal Display (LCD).  Displays protection point
    identification and system status, messages, and user
    instructions.
    2.OFF
     KEY: Disarms the burglary portion of the system,
    silences alarms and audible trouble indicators, and clears
    visual alarm trouble after the problem has been corrected.
    3.AWAY KEY: Completely arms both perimeter and interior
    burglary protection for backup protection by sensing an
    intruders movements through protected interior areas as
    well as guarding protected doors, windows, etc. Entrance
    can be made through an entry delay zone without causing
    an alarm if the system is disarmed before the entry delay
    time expires.
    4.STAY KEY: Arms the perimeter burglary protection,
    guarding protected doors, windows and other perimeter
    protection points, and sounds an alarm if one is opened.
    Interior protection is not armed, which allows movement
    within your house without causing an alarm. Entrance can
    be made through an entry delay zone without causing an
    alarm if the system is disarmed before the entry delay time
    expires.
    5.MAXIMUM
     KEY: Arms in manner similar to AWAY mode,
    but eliminates the entry delay period, thus providing
    maximum protection. An alarm will occur immediately upon
    opening any protection point, including entry delay zones.6.TEST
     KEY:  Tests the system and alarm sounder.
    7.BYPASS
     KEY: Removes individual protection zones
    from being monitored by the system. Displays currently
    bypassed protection zones.
    8.INSTANT KEY: Arms in manner similar to STAY mode,
    but turns off the entry delay period, offering greater security
    while inside and not expecting any late arrivals.  An alarm
    will occur immediately upon opening any perimeter
    protection point, including entry delay zones
    9.CODE
     KEY: Allows the entry of additional user codes
    that can be given to other users of the system.
    10.CHIME KEY: Turns the CHIME mode on and off. When
    on, any entry through a protected delay or perimeter zone
    while the system is disarmed will cause a tone to sound at
    the Keypad(s).
    11.READY KEY: When depressed prior to arming the
    system, the keypad will display all open protection zones
    within the keypads home partition.
    12.   #  
     KEY: Permits ARMING of the system without use of
    a security code (Quick Arm, if programmed). Also used to
    view the second line of single-line Alpha keypads.
    13.KEYS 0-9: Used to enter your individual security access
    code(s). 
    						
    							– 13 –
    14.POWER/READY INDICATOR: On
    keypads with a “POWER” LED, primary
    power is on when lit. If off, system is
    operating on backup battery power. On
    keypads with a “READY” LED, system is
    ready to be armed if lit, while unlit
    indicates system is not ready (a zone is
    open).
    15.ARMED INDICATOR:  (RED) Lit when
    the system has been armed (STAY,
    AWAY, INSTANT or MAXIMUM).
    16.INTERNAL SOUNDER:  Source of
    audible internal warning and confirmation
    sounds, as well as alarms (see
    Summary of Audible Notifications).
    17.A-B-C PANIC KEYS:  Some keypads
    use key pairs to activate panic alarms,
    rather than individual keys. Refer to the
    PANIC KEYS section for descriptions of
    these keys.
    IMPORTANT!: When you use the keypadto enter codes and commands, press thekeys within 2 seconds of one another. If 2seconds elapse without a key depression,the entry is aborted and must be repeatedfrom its beginning.
    READY
    ARMED
    PA N I C
    OFF AWAY STAYMAX TEST BYPASSINSTANT CODE CHIMEREADY1
    2
    36 5 4
    89 70
    *
    #
    A
    B
    C
    1512
    5
    3
    4
    6
    7
    9
    10
    12
    13
    11 8 17 14
    16
    SHOWN WITH KEYPAD
    COVER REMOVED
    TYPICAL ALPHA KEYPAD
    Fixed-Word Consoles are functionally similar, except for
    screen displays. 
    						
    							– 14 –
    CHECKING FOR OPEN ZONES
    Using the   
     
    READY KeyBefore arming your system, all protected doors, windows and other protection zones
    must be closed or bypassed (see BYPASSING section). Otherwise the keypad will
    display a Not Ready message. Using the READY key will display all zones that are
    faulted, making it easier for you to secure any open zones.
    To show faulted zones:
    DIS ARM E D -  PRE SS 
     
    Note:  A green READY indicator (if present) on the keypad will be lit
    T O  SH OW   F AUL TS
    if the system is ready to be armed
    .  If not lit, the system is not ready.
     READY
    1.  
    
     PRESS THE READY KEY
    Do not enter security code, but simply press the
    READY key.
    2.
    F AULT   05  F RONT
    UPST AIRS  BE DROOM
    SECURE FAULTED ZONES
    Typical fault display shows open zones. Secure or
    bypass the zones displayed before arming the system.
    3.
    
     DISARME D 
    
    RE ADY T O ARM
    SYSTEM CAN BE ARMED
    The Ready message will be displayed when all pro-
    tection zones have been either closed or bypassed.
    You may now arm the system as usual. 
    						
    							– 15 –
    ARMING PERIMETER ONLY
    (With Entry Delay ON)
    Using the    3  
    STAY keyUse this key when you are staying home, but might expect someone to use the
    entrance door later.
    When armed in STAY mode, the system will sound an alarm if a protected door or
    window is opened, but you may otherwise move freely throughout the premises. Late
    arrivals can enter through the entrance door without causing an alarm, but they must
    disarm the system within the entry delay period or an alarm will occur.
    Close all protected perimeter windows and doors before arming (see CHECKING
    FOR OPEN ZONES section).  The green READY indicator (if present) on the keypad
    should be lit if the system is ready to be armed.
     STAY
    1.   
         
       
       
     +    3  
    ENTER SECURITY CODE THEN PRESS STAY
    (Security Code)
    Example: 7
     2
     9
     6
      then press the STAY key.
    2.
    ARME D 
    S
    TAY
    
    LISTEN FOR 3 BEEPS
    The keypad will beep three times and will display the
    armed STAY message. The red ARMED indicator also
    lights.
    You can restart the exit delay at any time after arming in STAY mode by pressing the
    
     key. This is useful if you wish to open the entry/exit door to let someone in after
    arming the system and avoids having to disarm the system and then re-arm it again. 
    						
    							– 16 –
    ARMING PERIMETER ONLY
    (With Entry Delay OFF)
    Using the
      7   INSTANT
    KeyUse this key when you are staying home and do not expect anyone to use the
    entrance door.
    When armed in INSTANT mode, the system will sound an alarm if a protected door or
    window is opened, but you may otherwise move freely throughout the premises. The
    alarm will also sound immediately if anyone opens the entrance door.
    Close all protected perimeter windows and doors before arming (see CHECKING
    FOR OPEN ZONES section).  The green READY indicator (if present) on the keypad
    should be lit if the system is ready to be armed.
    INSTANT
    1.   
       
       
       
     +    7  
    ENTER SECURITY CODE THEN PRESS INSTANT
    (Security Code)
    Example: 7
     2
     9
     6
      then press the INSTANT key.
    2.
    ARME D 
    
     INST ANT  
    
    LISTEN FOR 3 BEEPS
    The keypad will beep three times and will display the
    armed INSTANT message. The red ARMED indicator
    also lights.
    You can restart the exit delay at any time after arming in INSTANT mode by pressing
    the 
    
     key. This is useful if you wish to open the entry/exit door to let someone in after
    arming the system and avoids having to disarm the system and then re-arm it again. 
    						
    							– 17 –
    ARMING ALL PROTECTION
    (With Entry Delay ON)
    Using the
      2   AWAY KeyUse this key when no one will be staying on the premises.
    When armed in AWAY mode, the system will sound an alarm if a protected door or
    window is opened, or if any movement is detected inside the premises. You may leave
    through the entrance door during the exit delay period without causing an alarm. You
    may also re-enter through the entrance door, but must disarm the system within the
    entry delay period or an alarm will occur.
    Close all protected perimeter windows and doors before arming (see CHECKING
    FOR OPEN ZONES section). The green READY indicator (if present) on the keypad
    should be lit if the system is ready to be armed.
      AWAY
    1.   
       
       
       
     +    2  
    ENTER SECURITY CODE THEN PRESS AWAY
    (Security Code)
     
    Example: 7
     2
     9
     6
      then press the AWAY key.
    2.
    ARME D 
    
     
    AWAY 
    
    YOU MAY E XIT  NOW
    LISTEN
    The keypad will beep twice, or beep continuously if exit
    warning has been programmed for your system, and
    displays the armed AWAY message. The red ARMED
    indicator also lights.
    The You May Exit Now portion of the message
    disappears when the exit delay expires. 
    						
    							– 18 –
    ARMING ALL PROTECTION
    (With Entry Delay OFF)
    Using the
      4   MAXIMUM
    KeyUse this key when the premises will be vacant for extended periods of time such as
    vacations, etc., or when no one will be moving through protected interior areas.
    When armed in MAXIMUM mode, the system will sound an alarm if a protected door or
    window is opened, or if any movement is detected inside the premises. You may leave
    through the entrance door during the exit delay period without causing an alarm, but an
    alarm will be sounded as soon as someone re-enters.
    Close all protected perimeter windows and doors before arming (see CHECKING
    FOR OPEN ZONES section). The green READY indicator (if present) on the keypad
    should be lit if the system is ready to be armed.
    MAXIMUM
    1.   
       
       
       
     +    4  
    ENTER SECURITY CODE THEN PRESS MAXIMUM
    (Security Code)
    Example: 7
     2
     9
     6
      then press the MAXIMUM key.
    2.
    ARME D 
    
    MAXIMUM
    
    YOU MAY E XIT  NOW
    LISTEN
    The keypad will beep twice, or beep continuously if exit
    warning has been programmed for your system, and
    will display the armed MAXIMUM message
    (AWAY/INSTANT on fixed-word keypads). The red
    ARMED indicator also lights.
    The You May Exit Now portion of the message
    disappears when the exit delay expires. 
    						
    							– 19 –
    DISARMING AND SILENCING ALARMS
    Using the
      1   OFF KeyUse the OFF key to disarm the system and to silence alarm and trouble sounds. See
    SUMMARY OF AUDIBLE NOTIFICATION section for information which will help you
    to distinguish between FIRE and BURGLARY alarm sounds.
    IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the
    premises, but call the police from a nearby safe location. If you return after an alarmhas occurred and the main sounder has shut itself off, the keypad will beep rapidlyupon entering, indicating that an alarm has occurred during your absence and anintruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THEPOLICE from a nearby safe location.To disarm the system and silence burglary alarms:
    OFF
    1.   
       
       
       
     +    1  
    ENTER SECURITY CODE, THEN PRESS OFF
    (Security Code)
    Example: 7
     2
     9
     6
      then press the OFF key.
    2.
    
     DISARME D 
    
    RE ADY T O ARM
    LISTEN FOR 1 BEEP
    The “Ready” message will be displayed (if no alarms
    have occurred while armed) and the keypad will beep
    once to confirm that the system is disarmed. 
    						
    							– 20 –
    DISARMING AND SILENCING ALARMS
    (Continued)
    Memory of AlarmIf an alarm occurs, the keypad displays the zone number (s) that caused the alarm and
    the type of alarm. These messages remain displayed until cleared by a user.
    To clear the display, note the zone number displayed and enter an OFF sequence
    (enter your security code and press the OFF key).
    If the Ready message will not display, go to the displayed zone and correct the fault
    (close windows, etc.). If the fault cannot be corrected, notify your alarm company. 
    						
    All Honeywell manuals Comments (0)

    Related Manuals for Honeywell control panel VISTA20SE Security System User Manual