Honeywell control panel LYNXREN User Manual

							 
 
 
 
 
 
 
 
 
 
    
ADEMCO LYNXR-EN 
  Security System
  
 
User Guide  
 
 
 
 
 
 
 
AWAY OFF
STAY
AUXLIGHTS ON RECORD
LIGHTS OFF
STATUSTEST VOLUME
CODE
NO DELAYBYPASSPLAY
CHIME
FUNCTION DELETE ESCAPE
ADD
SELECT
ARMED
READY
4
5
6
7
8
9
0
# 1
2
3
 
 
 
 
 
 
 
 
K5964V3bx  5/04  Rev. A   
						

							– 2 – 
 
Your Honeywell security system is designed for use with devices manufactured or approved by 
Honeywell for use with your security system.  Your Honeywell security system is not designed for 
use with any device that may be attached to your security systems keypad or other 
communicating bus if Honeywell has not approved such device for use with your security system.  
Use of any such unauthorized device may cause damage or compromise the performance of your 
security system and affect the validity of your Honeywell limited warranty.  W hen you purchase 
devices that have been manufactured or approved by Honeywell, you acquire the assurance that 
these devices have been thoroughly tested to ensure optimum performance when used with your 
Honeywell security system.    
						

							– 3 – 
  
TABLE OF CONTENTS
TABLE OF CONTENTSTABLE OF CONTENTS TABLE OF CONTENTS 
    
 
SYSTEM OVERVIEW................................................................................................................................5 
 Features ................................................................................................................................................. 5 
 General Operation ................................................................................................................................. 7 
  Quick View of System Functions .......................................................................................................... 9 
  About the Master Keypad ................................................................................................................... 11 
  Master Keypad Definitions ................................................................................................................. 12 
  About the Display and Indicators ....................................................................................................... 14 
SECURING THE PREMISES................................................................................................................ 15 
  Checking System Status ..................................................................................................................... 15 
  Arming the System .............................................................................................................................. 16 
 Entry/Exit Delays ................................................................................................................................ 18 
  Disarming the System ......................................................................................................................... 19 
  Bypassing Protection Zones ................................................................................................................ 20 
  Panic Keys / Chime Mode.................................................................................................................... 21 
USER FUNCTIONS................................................................................................................................. 22 
 Paging Feature .................................................................................................................................... 22 
  “Follow Me” Announcement Feature .................................................................................................. 23 
  Using Powerline Carrier Device Commands (Lights On/Lights Off keys)........................................ 25 
  Message Recording/Playback/Volume Control ................................................................................... 26 
 Aux Function ....................................................................................................................................... 28 
 Clock/Calendar .................................................................................................................................... 29 
  Scheduling User Interface................................................................................................................... 31 
  Remote Phone Control Feature........................................................................................................... 36 
  Speaker Phone Feature ....................................................................................................................... 38 
FIRE ALARM SYSTEM........................................................................................................................... 40 
 General Information ............................................................................................................................ 40 
  National Fire Protection Association’s Smoke Detector Recommendations ..................................... 41 
 Emergency Evacuation........................................................................................................................ 42 
SYSTEM FUNCTIONS............................................................................................................................ 43 
 Security Codes ..................................................................................................................................... 43 
  Testing the System .............................................................................................................................. 44 
 Trouble Messages ................................................................................................................................ 45 
  Maintaining Your System ................................................................................................................... 46 
SUMMARY OF AUDIBLE NOTIFICATION........................................................................................ 47 
FCC STATEMENTS................................................................................................................................. 49 
OWNER’S INSURANCE PREMIUM CREDIT REQUEST................................................................ 53 
INDEX........................................................................................................................................................ 55 
LIMITATIONS OF THIS ALARM SYSTEM........................................................................................ 57 
ONE YEAR WARRANTY........................................................................................................................ 58 
 
 Congratulations on your ownership of a Honeywell Security System. You have made a wise 
decision in choosing it, for it represents the latest in security protection technology today. 
Honeywell is the worlds largest manufacturer of security systems, and millions of premises 
are protected by Honeywell products.  
						

							– 4 –  
						

							– 5 – 
SYSTEM OVE
SYSTEM OVESYSTEM OVE SYSTEM OVERVIEW
RVIEWRVIEW RVIEW 
    
Features 
General Information 
This system offers you three forms of protection: burglary, fire, and emergency, depending on the 
configuration of your system. The system consists of a master keypad for controlling system operation, 
various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or 
combustion detectors to provide early fire warning. In addition, optional wireless keypads may have 
been installed to allow you to control the system away from the master keypad. The system may also be 
controlled from a remote telephone and can be used as a speaker phone. 
The system uses microcomputer technology to monitor all protection zones and system status, display 
appropriate information on the keypad display, and initiate appropriate alarms. Your system may also 
have been programmed to automatically send alarm or status messages over the phone lines to a 
central alarm monitoring station, and may also be capable of two-way voice communication with the 
central station.  
 
The user features of this security system are listed below. Ask your installer which features 
have been programmed for your system. 
• STAY and AWAY arming modes: By using these modes you can protect either the perimeter only, 
or the entire premises. 
• 3 panic key functions: Designated keys allow you to manually activate fire, personal emergency, or 
silent alarms. Refer to the PANIC KEYS section for detailed information. 
• Paging feature: If programmed by your installer this feature alerts you to certain system conditions 
by displaying code numbers that indicate the type of condition that has occurred. In addition, 
pressing the AUX key can send a predefined message to your pager, if programmed to do so (see AUX 
key function below). Refer to the PAGING FEATURE section for detailed information. 
• Follow me system announcements:  Allows the LYNXR-EN to dial a number, programmed by 
your installer, and deliver system announcements.  
• Follow me reminder announcements:  Allows the LYNXR-EN to dial a number, that you have 
specified, at a programmed time and day and deliver a message programmed by your installer.  
• Real-time clock: Keypad displays current time. Refer to the CLOCK/CALENDAR section for 
procedures for setting the time. 
• Voice announcement of system status: The master keypad’s built-in speaker announces system 
status at the press of a key. Refer to the CHECKING SYSTEM STATUS section for detailed 
information. 
• Message center: The system allows recording and play back of brief messages. Refer to the 
RECORDING/PLAYBACK MESSAGES section for procedures. 
• Device activation: Designated keys allow you to turn lights and/or other devices on and off. In 
addition, some devices (e.g., a light) may be programmed to activate automatically as a result of a 
system event such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER 
DEVICE COMMANDS section for detailed information. 
  
						

							– 6 – 
SYSTEM OVERVIEW
SYSTEM OVERVIEWSYSTEM OVERVIEW SYSTEM OVERVIEW 
    
Features 
 
• AUX key function: Designated key lets you activate a predefined series of keystrokes with a single 
press of the 
AUX key plus user code, or manually send a pager message. It will also allow you to 
manually send a voice message to phone number that has been programmed by your installer. Ask 
your installer which of these features has been assigned to the 
AUX key in your LYNXR-EN. Refer 
to the AUX FUNCTION section for detailed information. 
• Scheduling feature: Allows you to schedule the automatic activation or deactivation of X-10 devices 
or program events (e.g. alarm clock, reminder, and latch key). 
• Two-way voice: Allows the central station to listen, talk to or conduct two-way conversations with 
individuals on the premises Refer to the TWO-WAY VOICE section for detailed information.  
• Phone Control: Provides a remote interactive phone capability that permits access to the security 
system from any off-site touch-tone telephone. 
• Speaker Phone Operation: The system is capable of operating as a speaker phone allowing hands 
free telephone conversation. 
• Security Codes: The system is capable of supporting an Installer code, Master user code and six 
additional User codes. Refer to the SECURITY CODES section for detailed information.  
						

							– 7 – 
 
    
SYSTEM 
SYSTEM SYSTEM  SYSTEM OVERVIEW
OVERVIEWOVERVIEW OVERVIEW 
    
General Operation  
Zones 
Your systems sensing devices have been assigned to various zones. For example, the sensing device 
on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master 
bedroom to zone 02, and so on. These numbers appear on the display when an alarm or trouble 
condition occurs. 
 
U
UU U
L
LL L 
    
 LYNXR-EN is not intended for UL985 Household Fire applications unless a 24-hour 
backup battery (P/N LYNXRCHKIT-HC) is installed. 
 
Fire Protection 
The fire protection portion of your security system (if used) is always active and will sound an alarm if 
a fire condition is detected. Refer to the FIRE ALARM SYSTEM section for important information 
concerning fire protection, smoke detectors and planning emergency exit routes from the premises. 
Burglary Protection 
Your system provides two modes of burglary protection: STAY and AWAY. STAY mode protects the 
perimeter only, allowing you to freely move within inside the premises. AWAY mode protects the entire 
system. Both modes provide an entry delay time that allows you to reenter the premises without setting 
off an alarm. For additional security, you can turn the entry delay off when arming the system by using 
the 
NO DELAY key in combination with the desired arming key. The system also allows you to bypass 
selected zones before arming the system, if desired. Refer to the BYPASSING PROTECTION ZONES 
section. The system also provides a CHIME mode, for alerting users to the opening of protected doors 
and windows while the system is disarmed. 
You must turn on (arm) the burglary protection portion of your system before it will sense burglary 
alarms.  To arm the system, enter your user code then press the desired arming key (AWAY or STAY). 
Refer to the ARMING THE SYSTEM section for detailed procedures and information. 
Security Codes 
At the time of installation, you were assigned a personal 4-digit security or “master user” code. You 
must enter the user code when arming and disarming the system, and when performing other system 
functions. As an additional security feature, other users who do not need to know your code can be 
assigned up to 6 different security codes. Refer to the SECURITY CODES section for procedures on 
adding security codes to the system. 
Alarms 
When an alarm occurs, the keypad and external sounders will sound for about 15-seconds, and the 
keypad will display the zone(s) causing the alarm. After 15-seconds, the siren stops temporarily and 
voice announcements of the zones in alarm begins. When these zones have been announced, the siren 
sounds again and the cycle repeats itself, until the system is disarmed  (code + OFF) or  
						

							– 8 – 
SYSTEM OVERVIEW
SYSTEM OVERVIEWSYSTEM OVERVIEW SYSTEM OVERVIEW 
    
General Operation 
 
until alarm bell timeout occurs. If your system is connected to a central monitoring station, an alarm 
message will be sent. To stop the alarm sounding, simply disarm the system. The zone(s) causing the 
alarm remain displayed indicating memory of alarm. Refer to the DISARMING THE SYSTEM section 
for information about clearing the memory of alarm display 
 
Two-Way Voice Feature 
The LYNXR-EN supports voice dialog between an operator at the central station and an individual at 
the premises. This feature allows the central station to listen, talk to or conduct a two-way conversation 
with an individual(s) at the premises and allows the operator to gather information about the nature 
and location of the alarm that may be helpful in responding to fire, police or rescue departments. If the 
Two-way Voice Feature has been programmed and an alarm condition is detected the system sends an 
alarm message to the central station. After acknowledgement is received, a “listen in to follow” message 
is sent to the central station. By responding to this message the central station operator can enter 
commands that allow him to initiate a 5-minute voice session. The options allow the operator to enter 
the following modes: 
• Talk: Allows the operator to speak to individuals at the premises through the system speaker. 
• VOX (2-way voice): Allows the operator to hold a two-way (speak and listen) conversation with 
individuals at the premises. 
• Listen: Allows the operator to listen to any activity at the premises through the system microphone. 
If a subsequent zone is violated during a voice session, the system will terminate the session and 
process the alarm. During the voice session, the ARMED (red) and READY (green) LEDs will 
alternately blink in the Talk and VOX Modes but not during Listen Mode. 
   
						

							– 9 – 
QUICK VIEW OF SYSTEM F
QUICK VIEW OF SYSTEM FQUICK VIEW OF SYSTEM F QUICK VIEW OF SYSTEM FUNCTIONS
UNCTIONSUNCTIONS UNCTIONS 
    
 
NOTE:                         = Boxes represent the entering of your 4-digit user code. 
SECURITY FUNCTIONS 
Checking system status: ---------------STATUS  
To arm in STAY mode:   ----------------                       *
+ STAY  
To restart exit delay: -------------------STAY  (only if programmed and system armed in Stay mode) 
To arm in AWAY mode:   ---------------                       *
  +  AWAY  
To arm with NO DELAY:   -------------                       *
   +  AWAY or  STAY  +   NO DELAY  
To arm if Quick Arm is active: -----AWAY or  STAY  (hold down for at least 2 seconds) 
To disarm system and silence alarms:                           +  OFF  
To bypass a zone(s): ---------------------                         +  BYPASS  + 2-digit zone number(s)  
To turn Chime mode on or off: -----FUNCTION  +  CHIME  
*
 Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or  AWAY key. 
 
MESSAGE CENTER 
To record a message: -------------------FUNCTION  +   RECORD  
To stop recording before end of 85 secs:  OFF  
To play back a message: ---------------FUNCTION  +   PLAY  
To skip a message:----------------------------  [✻] 
To delete all messages:--------------------  FUNCTION  +  DELETE (during message replay) 
 
VOLUME ADJUSTMENT 
To adjust message playback/announcement volume:  FUNCTION  +   VOLUME + [3]  or [6] 
To mute system announcements: -FUNCTION  +   VOLUME  +   OFF  
To restore/unmute announcements:  FUNCTION  +   VOLUME + [3]  or [6] 
 
SPEAKER PHONE OPERATION 
To enter speaker phone mode: -----[#] +  AUX  
To exit speaker phone mode: -------OFF  
To enable/disable (toggle) ringer: [#] +  VOLUME  +  AUX  
To return keypad to telephone mode (after clearing an alarm or trouble or disarming the system):  [#] +  AUX  
To flash (switch between two calls using call waiting): AUX *  
*To return to first call wait at least two (2) seconds and enter  AUX again.  
						

							– 10 – 
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS 
     
REMOTE PHONE CONTROL OPERATION  
To remotely disarm: ---------------------                          +  [1] 
To remotely arm in AWAY mode: -                          +  [2] 
To remotely arm in STAY mode: --                          +  [3] 
To remotely arm in AWAY or STAY mode with NO DELAY:                           +  [2] or [3] + [0] 
To remotely activate X-10 devices 1-6: ---------  [#] + [4] + device no. 
To remotely activate X-10 devices 7 & 8: -----                          +  [#] + [4] + device no. 
To remotely deactivate X-10 devices 1-6: -----  [#] + [7] + device no. 
To remotely deactivate X-10 devices 7 & 8:                           +  [#] + [7] + device no. 
To remotely bypass a zone: ----------                          +  [6] + zone no. 
To remotely activate forced bypass: ------------                          +  [6] + [#]* 
To remotely check system status: - [*] 
To hang up: ----------------------------------                          +  [9] 
*If forced bypass was enabled by your installer.  
OTHER FUNCTIONS 
To set the time and date: --------------                          +  FUNCTION  +  [63] 
To set scheduling: ------------------------                          +  FUNCTION  +  [64] 
To activate X-10 devices 1-6:  --------FUNCTION  +  LIGHTS ON  + device number  
To activate X-10 devices 7 & 8: -----                       +FUNCTION +LIGHTS ON + device number 
To deactivate X-10 devices 1-6:  ----FUNCTION  +  LIGHTS OFF  + device number  
To deactivate X-10 dev. 7 & 8: -------                       +FUNCTION +LIGHTS OFF + device number 
To add a user code:   ---------------------                       **
 +  CODE + user no. (02-08)+ user code 
To delete a user code (except Master Code):                        **
 +  CODE  + user number   (02-08) 
To turn Test mode on: ------------------                         +  TEST   
To turn Test mode off: -----------------                        +  OFF   
To use the defined AUX function:-Press and hold  AUX key 2 seconds (4 beeps) +                          
To send message to pager:------------Press and hold  AUX key 2 seconds (4 beeps) 
To program “Follow Me” reminder phone #:                        +FUNCTION + [65] + Enter up to 24 
digits 
To delete “Follow Me” reminder phone #:                         +   FUNCTION  +  [65] 
** Only the master code can be used to add or delete another user code.