Home > Honeywell > Control panel > Honeywell control panel LYNX Touch L5200L7000 Security Systm User Manual

Honeywell control panel LYNX Touch L5200L7000 Security Systm User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Honeywell control panel LYNX Touch L5200L7000 Security Systm User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Home Automation  
    - 21 - 
    Z-Wave® Glossary 
    Controller  The Primary Controller is the main device used to set up and control your Z-Wave network.  There can 
    only be one primary controller and it must be used to add or delete devices.  A primary controller can be 
    a portable device like a hand-held remote, a static controller (permanently installed and never moved), a 
    Z-wave enabled PC or a Z-Wave enabled Ethernet router/bridge. A Secondary controller can not be 
    used to add or delete devices. If the secondary controller is the same brand and model as the primary, it 
    will have all of the same capabilities as the primary but can not be used to add or delete devices. 
    Event  An event is something you want to happen at a specific time and day.  This could be every day, a 
    specific day of the week, Monday through Friday, Saturday and Sunday only, or a one time occurrence.  
    Events can be set up to control an individual device, a group or a scene. 
    Exclude  When a device is excluded, it is removed from the LYNX Touch system. Excluding the device also 
    removes the network pairing from the device’s memory.  
    Important Note:  A device must be excluded before it can be moved to another network or re-included after a 
    controller reset.  
    Include  Including a device pairs it with the LYNX Touch so that the two can communicate. It is also referred to as 
    Adding. 
    Node  Node is the technical term used to describe a Z-Wave device in your home control network.  Please note 
    that the terms Node, Device and Light all refer to an individual Z-Wave enabled device and are 
    interchangeable within the context of these instructions. 
    Rules  Rules are used to automatically perform specified functions in response to certain events, which trigger 
    scenes. 
    Scene  A scene lets you control multiple functions automatically. For example you can establish preset 
    brightness levels for multiple Z-wave controlled lights and then control them with one command.  This is 
    ideal for mood or task lighting.  Scene 1 could be the family room lights set to dim for watching TV.  
    Scene 2 could have the same lights set to a different brightness level for other activities like reading or 
    entertaining. 
    Schedules  The Schedules Feature can be used to program the system to automatically perform certain functions 
    (i.e.; automatically arming the system in Stay mode and activating output [Z-Wave] devices) via Scenes. 
      
    						
    							Home Automation  
    - 22 - 
     
    Z-Wave Compatibility 
    Compatible Z-Wave Devices 
    Z-Wave devices may vary; follow the instructions provided with the specific device when including and 
    excluding devices into the Z-Wave network. Refer to the list to view the compatible devices. 
    Note: Not all Z-wave devices have been tested and some features may produce unpredictable results. 
    Door Locks 
    Yale Real Living  Push Button Lever Lock 
    Yale Real Living Touchscreen Lever Lock  
    Yale Real Living  Push Button Deadbolt Lock 
    Yale Real Living Touchscreen Deadbolt Lock  
    Schlage Link Deadbolt Lock 
    Schlage Link Lever Lock  
    Kwikset Smartcode Lever lock 
    Kwikset Smartcode Deadbolt Lock  
    Thermostats 
    Honeywell ECC  
    Wayne Dalton Zwave Thermostat 
    Trane Zwave Thermostat 
    Residential Control Systems Thermostat  
    (Model TZ45) 
    Intermatic InTouch Thermostat (Model CA8900) 
    Radio Thermostat Company of America 
    (Model CT100) 
    Siren 
    Fortrezz SSA1/SSA2 Wireless Siren  & Strobe 
    Alarm 
    Water Valve 
    FortrezZ WV-01 Wireless Z-Wave Water Valve 
     
    Appliance 
    HomeManageable Appliance Module  
    Wayne Dalton Small Appliance Module  
    GE Wireless Lighting Control Plug In Appliance Module  
    SOMFY 
    Cooper In-Wall Duplex Receptacle Module (Model 
    RF9505-TDS) 
    Lights 
    Leviton/ViziaRF+ switches 
    Leviton/ViziaRF+ dimmers 
    Leviton/ViziaRF+ plug in modules 
    GE wireless lighting control dimmers 
    GE wireless lighting control Switches 
    GE wireless lighting control plug in lamp modules 
    Intermatic In-Wall Receptacle (Model HA01) 
    Cooper Plug-in Lighting Switch Module (Model RFAPM) 
    AEON Labs Lamp/Dimmer Module (Model DSC06106-
    ZWUS) 
    Remotec Lamp Dimmer Module  (Model ZDS-100US) 
    Window Shades 
    Somfy ILT series 
      
    						
    							Home Automation  
    - 23 - 
    Important Notes 
    Wireless Range 
    This device complies with the Z-Wave® standard of open-air, line of sight transmission distances of 100 feet. Actual performance 
    in a home depends on the number of walls between the controller and the destination device, the type of construction and the 
    number of Z-Wave enabled devices installed in the control network. 
     
    Please Note: Z-Wave home control networks are designed to work properly alongside wireless security sensors, Wi-Fi, 
    Bluetooth and other wireless devices. Some 900MHz wireless devices such as baby cams, wireless video devices and older 
    cordless phones may cause interference and limit Z-Wave functionality. 
     
    Things to consider regarding RF range: 
    • Each wall or obstacle (such as refrigerator, big screen TV, etc.) between the remote and the destination device will 
    reduce the maximum range of 100 feet by approximately 25-30%. 
    • Brick, tile or concrete walls block more of the RF signal than walls made of wooden studs and drywall. 
    • Wall mounted Z-Wave devices installed in metal junction boxes will suffer a significant loss of range (approximately 20%) 
    since the metal box blocks a large part of the RF signal. 
    WARNING: NOT FOR USE WITH MEDICAL OR LIFE SUPPORT EQUIPMENT!  
    Z-Wave enabled devices should never be used to supply power to, or control the On/Off status or medical and /or life support 
    equipment.  
     
    Additional Z-Wave Information 
    1.  Once the system has reached node number 232, the system will not allow devices to be enrolled. Reset Controller needs to 
    be performed to allow the system to enroll Z-wave devices.  The node numbers can be viewed by selecting Automation 
    Tools Advanced Tools View Enrolled Devices. 
    2.   The system is not aware of door locks being enabled with any temporary user shutdown feature such as Vacation Mode.  The 
    system will continue to unlock a door if programmed to do so via Rules, Schedules and Scenes. 
    3.   Certain door lock models with thumbturns will provide a brief time window for you to turn the thumbturn before they 
    automatically lock on their own.  These types of door locks are not recommended for use in conjunction with Z-Wave rules, 
    schedules, and scenes.  
    						
    							 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Z-Wave devices are identified by the Z-Wave logo and can be purchased from your local retailer. 
    Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries
    .  
    . 
     
    2013
     
     
    Ê800-16091/Š 
    800-16091  12/13  Rev. A  
    						
    All Honeywell manuals Comments (0)

    Related Manuals for Honeywell control panel LYNX Touch L5200L7000 Security Systm User Manual