Honeywell control panel LYNX Touch 5100 User Manual
Here you can view all the pages of manual Honeywell control panel LYNX Touch 5100 User Manual. The Honeywell manuals for Control panel are available online for free. You can easily download all the documents as PDF.
Page 61
– 61 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
Reminders
Ready To Arm
Save
5000-100-183-V0
Start Time3:00 PM
DateJanuary 1, 2011
FrequencyOnceNameWalk Dog
VoiceNoFollow MeDisabledAcknowledgeNo
10. If a
“Follow Me ” phone number(s) was
programmed by your installer you can send
a reminder to the phone number(s). Select
“ Follow Me ” option. The system toggles
between “Disabled ”, “To Ph. 1 ”, “To Ph. 2 ”
and “To Ph. 1 & 2 ”, as applicable.
Note: For important...
Page 62
– 62 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
WiFi Configuration
View/Join Available WiFi Networks
WiFi Config
Date Time
Ready To Arm
Events
Back
Reminders
KeypadUsers
5100-100-006-V0
Slide Show
Test
1. At the Master User screen select the WiFi
Config icon. The system displays the WiFi
options screen.
5100-100-032-V0
Scan Access Points
Manual Configure AP
Ready To Arm
2. Select the
“Scan Access Points ” button to
view the available networks. The available...
Page 63
– 63 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
WiFi Configuration
Manually Configure Access Point
WiFi Config
Date Time
Ready To Arm
Events
Back
Reminders
KeypadUsers
5100-100-006-V0
Slide Show
Test
1. At the Master User screen select the WiFi
Config icon. The system displays the WiFi
options screen.
5100-100-032-V0
Scan Access Points
Manual Configure AP
Ready To Arm
2. Select the
“Manually Configure AP ” button to
view the available networks. The WiFi
enrollment...
Page 64
– 64 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
WiFi Configuration
Enrolling/Syncing Auxiliary Keypads
The LYNX Touch will support up to four Mobile Internet Devices (MID) (or tablets) that can
be used as auxiliary keypads. A WiFi communication device is required. The “Keypad” button
is used to enroll/sync the MID with the control. Refer to the documentation provided with the
MID to enroll/sync the keypad.
Viewing or Deleting Enrolled Keypads
WiFi Config
Date Time...
Page 65
– 65 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
Speaker Phone Feature
If this feature has been programmed the LYNX Touch is capable of operating as a speaker
phone. During speaker phone operation the system will provide the following functions:
• All function/event processing will continue to operate, but there will be no
announcements.
NOTE: The system will enter the Speaker Phone mode even if an alarm or trouble is stored in the system
memory.
!
Do not use...
Page 66
– 66 – US USUS USER FUNCTIONS ER FUNCTIONSER FUNCTIONS ER FUNCTIONS Speaker Phone Feature Placing a Call Ready To Arm 5000-100-006-V1 Arm Away Delay Phone More Automation Message Zones Arm Stay 72 10:18 AM June 8, 2010 1. With the system in the disarmed or armed state, select the “Phone ” icon from the Home Screen. The system displays the Keypad screen. Ready To Arm Talk 23 1 5 6 4 0 8 9 7 5000-100-148-V0 Flash Redial Volume 2. Select the “Talk ” icon and then enter the number you...
Page 67
– 67 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
Remote Phone Control Feature
The LYNX Touch Series is equipped with a remote interactive phone capability that permits
access to the security system from any off-site touch-tone telephone using all user codes. The
system will provide the appropriate voice messages and any system beeping sounds
indicating the status of the security system over the phone line. Refer to Summary of Audible
Notification section for further...
Page 68
– 68 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
Remote Services
Your security system may be capable of providing a series of web-based services that allow
you to communicate with your security system remotely in a number of ways. These services
provide the ability to:
• Access to your security system from a computer via website (Remote Access Feature)
• Receive e-mail and text message notification of system events (Multi-Mode Feature)
• Perform system functions and...
Page 69
– 69 –
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS
Slide Show
The LYNX Touch features a Slide Show/Screen Saver feature. The feature allows images to
be displayed on the touch screen when it is not in use. Connection to Total Connect Service is
required in order for your installer to upload images to your panel. For more information
about this option, speak to your installer.
Activating the Slide Show
Arm Away
Ready To Arm
Dashboard
Arm Stay
Back
DelaySettings
10:18 AM...
Page 70
– 70 – USER FUNCT USER FUNCT USER FUNCT USER FUNCTIONS IONSIONS IONS Slide Show Ready To Arm 5000-100-196-V0 Slide Internal 5 Seconds Delete All Slide After DisabledSave 12 4. Select the “Slide Show ” icons that you do not wish to display or select “Delete All ”. Use the “S ” “T ” buttons to scroll to second and subsequent pages of screens. 5. Select the “Slide Interval ” button. The system scrolls through the following options: Slide Interval 5 Seconds Slide Interval 10...