Honeywell control panel LYNX Touch 5100 User Manual

– 51 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
 Ready To Arm
5000-100-192-V0
Save        Third Start Zone
Disabled
         First Start Zone
Disabled
      Second Start Zone
Disabled
Zone Number Operation
Fault
       Third Stop Zone
Disabled
        First Stop Zone
Disabled
    Second Stop Zone
Disabled
 
OR 
Ready To Arm
5100-100-069-V0
Save        Third Zone Fault
Disabled
         First Zone Fault
Disabled
      Second Zone Fault
Disabled
Zone Number Operation...

– 52 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
 
Schedules 
The Schedules Feature can be used to program the system to automatically perform certain 
functions (i.e.; automatically arming the system in Stay mode and activating output [Z-
Wave] devices). 
 
Programming a Scheduled Function 
Zones
Arm Away
Ready To Arm
Arm Stay
More
DelayPhone
10:18 AM  June 8,  20105100-100-004-V0
72
Message
Automation
  1. With the system in the disarmed state, 
select the “...

– 53 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
Ready To Arm
5000-100-144-V0
Save
Frequency
None
Type
None
Name
 4. Select 
“Name ”. The system displays a 
keypad. 
 
Ready To Arm
5000-100-081-V0
A
Q User3
Z
S
W
L
OP
M
K
I
N J
U	
V
G
T
B
H
Y
C F
R
X D
E
Clear
Done
123!@#
abc...
 5.  Enter a name (up to 13 digits long) for the 
scheduled function on the displayed keypad 
then select  “Done” . 
6. Select  “Frequency ” then select one of the 
following displayed...

– 54 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation  Ready To Arm
23
1
5 6
4
0 8 9
7
Clear
5000-100-147-V0
AM / PM
Enter Time
10:21    AM
Done
  9.  If Auto Stay is selected, select “
Clear” then 
enter a 4-digit time on the displayed keypad 
then select “ Save”. If “ Rules ” is selected 
proceed to Step 11. If “ Disarm Notification” 
is selected proceed to Step 12. 
10. Select  “Rules ” then select a Rule from the 
displayed list (Rules 1 through Rules 20). 
11. Enter a...

– 55 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
Scenes 
Scenes are used to control a single or group of devices together, turning them OFF, ON, ON 
to a preset lighting level, temperature or mode, or lock/unlocked.  The LYNX Touch has 20 
Scenes which may each be configured with up to 10 devices each. Scenes can be manually 
activated or activated by a Rule.  Rules are used to control Scenes by pre-set “Conditions” 
and “Triggers”.  Up to 20 Rules may be programmed...

– 56 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
 
5100-100-083-V0
Switches
Locks Thermostat
68
Ready To Arm
 
 
  4. Select the 
“Add New Device ” button. The 
system displays the available Z-Wave 
device types. Select one of the following 
options: 
 Switches 
 Thermostats 
 Locks  
5.  Select the desired device type, then select  the applicable device from the list of 
installed devices. The device ’s operational 
screen is displayed. Up to 10 devices may 
be...

– 57 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
Editing/Deleting a Scene 
Zones
Arm Away
Ready To Arm
Arm Stay
More
DelayPhone
10:18 AM  June 8,  20105100-100-004-V0
72
Message
Automation
  1. With the system in the disarmed state, 
select the “ Automation”  icon from the Home 
Screen. The system displays the Keypad 
screen. 
 
5100-100-007-V0
Rules
Switches
Schedules
Scenes
Locks
Tools Thermostat
68
Ready To Arm
  2. Select the 
“Scenes ” button. The system...

– 58 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Automation 
Running a Scene 
Zones
Arm Away
Ready To Arm
Arm Stay
More
DelayPhone
10:18 AM  June 8,  20105100-100-004-V0
72
Message
Automation
  1. With the system in the disarmed state, 
select the “ Automation”  icon from the Home 
Screen. The system displays the Keypad 
screen. 
 
5100-100-007-V0
Rules
Switches
Schedules
Scenes
Locks
Tools Thermostat
68
Ready To Arm
  2. Select  the 
“Scenes ” icon. The system 
displays the...

– 59 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Reminders 
The Reminder Feature can be used to program/record reminders that can be displayed on the 
touch screen, announced by the control and/or sent to one or two pre-programmed phone 
number(s). Check with your installer to see if the latter feature has been programmed on 
your control. 
Programming a Reminder 
Arm Away
Ready To Arm
Dashboard
Arm Stay
Back
DelaySettings
10:18 AM  June 8,  20105100-100-003-V0
Tools
  1. With...

– 60 – 
USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS 
    
Reminders  
Ready To Arm
5000-100-178-V0
Edit
No items to display!
Delete
Add New
  4. Select 
“Add New ”. The system displays the 
Reminder programming screen.  
 
Ready To Arm
Save
5000-100-176-V0
Name FrequencyNone
VoiceNoAcknowledgeNo
 
Ready To Arm
5000-100-180-V0
A
Q
Z
S
W
L
OP
M
K
I
N J
U	
V
G
T
B
H
Y
C F
R
X D
E
Clear
Done
123!@#
abc...
 5. Select 
“Name ”. Enter a name for the 
scheduled function on the displayed keypad...