Honeywell 4 Channel Manual

							Figures
Rev 3.03 ix Document 900.0315
02/07
Figure 3-61 Load / Save Setup Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 75
Figure 4-1 DVR Front Panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 78
Figure 4-2 Live Monitoring (Text-In) Screen.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 79
Figure 4-3 PTZ Menu Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 80
Figure 4-4 PTZ Preset Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 80
Figure 4-5 Preset View Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 81
Figure 4-6 Playback (Text-In) Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83
Figure 4-7 Digital Zoom Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 85
Figure 4-8 Search Menu .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .85
Figure 4-9 Date/Time Search Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 86
Figure 4-10 Calendar Search Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 86
Figure 4-11 Event Log Screen  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 87
Figure 4-12 Event Search (by Event) Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 87
Figure 4-13 Event Search (by Camera) Screen   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 88
Figure 4-14 Text-In Log Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 88
Figure 4-15 Text-In Search Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 89
Figure B-1 Text-In Search Condition Example 1   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 94
Figure B-2 Text-In Search Condition Example 2   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 95
Figure E-1 Screen Map   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  101 
						

							Figures
Rev 3.03 x Document 900.0315
02/07 
						

							Tables
Rev 3.03 xi Document 900.0315
02/07
Tables
Table 3-1 Front Panel LEDs and Controls.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18
Table 3-2 Motion Detection Zone Choices  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 37
Table 4-1 Playback Controls   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83
Table F-1 Technical Specifications  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  103 
						

							Tables
Rev 3.03 xii Document 900.0315
02/07 
						

							Rev 3.03 xiii Document 900.0315
02/07
About This Document
This document introduces the HRHD 410 4-channel Digital Video Recorder (DVR) and 
describes how to install, configure, and operate the DVR.
Overview of Contents
This document contains the following chapters and appendixes:
Chapter 1, Introduction, introduces the HRHD 4-channel DVR, lists the features, 
and gives a functional overview of the components. 
Chapter 2, Installation, describes how to install the DVR and connect the system 
components.
Chapter 3, Configuration, provides an overview of the front panel controls and 
LCD displays and provides instructions for configuring the DVR.
Chapter 4, Operation, covers live monitoring, recording video and audio, playing 
recorded video, and searching for video.
Appendix A, USB Hard Disk Drive Preparation, shows how to prepare the USB 
hard disk drive for computers using Microsoft® Windows® 2000/98 operating 
systems.
Appendix B, Text-In Query Examples, provides examples of two typical text-in 
queries.
Appendix C, Solutions, provides answers for common technical issues.
Appendix D, Connector Pinouts, describes I/O and RS485 connector pinouts.
Appendix F, Specifications, lists the DVR specifications.
Appendix E, Map of Screens, provides a graphical illustration of the menu screens. 
						

							Rev 3.03 xiv Document 900.0315
02/07
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the appliance is 
operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid 
aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval of the 
manufacturer as such additions may result in the risk of fire, electric shock, or 
other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand, or table. The equipment 
may fall, causing serious injury to a child or adult, and serious damage to the 
equipment. Wall or shelf mounting should follow the manufacturers instructions, 
and should use a mounting kit approved by the manufacturer.
This equipment and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the equipment and cart 
combination to overturn.
7. Power Sources
This equipment should be operated only from the type of power source indicated 
on the marking label. If you are not sure of the type of power, please consult your 
equipment dealer or local power company.
8. Power Cords
Operator or installer must remove power, BNC, alarm, and other connections 
before moving the equipment. 
						

							Rev 3.03 xv Document 900.0315
02/07
9. Lightning
For added protection for this equipment during a lightning storm, or when it is left 
unattended and unused for long periods of time, unplug it from the wall outlet and 
disconnect the antenna or cable system. This will prevent damage to the 
equipment due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric 
shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as they may 
touch dangerous voltage points or short out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified 
service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service 
personnel under the following conditions:
 When the power-supply cord or the plug has been damaged
 If liquid is spilled or objects have fallen into the equipment
 If the equipment has been exposed to rain or water
 If the equipment does not operate normally by following the operating 
instructions, adjust only those controls that are covered by the operating 
instructions as an improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the equipment to its normal operation.
 If the equipment has been dropped or the cabinet damaged
 When the equipment exhibits a distinct change in performance - this indicates 
a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician has used 
replacement parts specified by the manufacturer or that have the same 
characteristics as the original part. Unauthorized substitutions may result in fire, 
electric shock, or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the service 
technician to perform safety checks to determine that the equipment is in proper 
operating condition.
16. Field Installation
This installation should be made by a qualified service person and should 
conform to all local codes. 
						

							Rev 3.03 xvi Document 900.0315
02/07
17. Correct Batteries 
WARNING!Risk of explosion if battery is replaced by an incorrect 
type. Dispose of used batteries according to the 
instructions.
18. Operating Temperature
An operating temperature range is specified (see Appendix F, Specifications) so 
that the customer and installer may determine a suitable operating environment 
for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient 
temperature of the rack environment may be greater than room ambient. 
Therefore, consideration should be given to installing the equipment in an 
environment compatible with the specified operating temperature range.
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of airflow 
required for safe operation of the equipment is not compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition 
is not caused by uneven mechanical loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit 
and the effect that overloading of circuits might have on over-current protection 
and supply wiring. Appropriate consideration of equipment nameplate ratings 
should be used when addressing this concern.
23. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained. Particular 
attention should be given to supply connections other than direct connections to 
the branch circuit (for example, use of power strips). 
						

							Introduction
Rev 3.03 1 Document 900.0315
02/07
1
Introduction
Features
Your color digital video recorder (DVR) provides recording capabilities for 4 camera 
inputs. It provides exceptional picture quality in both live and playback modes, and 
offers the following features:
 4 Composite Input Connectors
 Automatic detection of NTSC or PAL
 Compatibility with Color (NTSC or PAL) and B&W (CCIR and EIA-170) Video 
Sources
 Multiple search engines (Date/Time, Calendar, Event)
 Records up to 120 NTSC images per second (100 PAL ips)
 Loop-Through Video Connectors
 Continuous recording in Disk Overwrite Mode
 Continues recording while archiving, transmitting to remote site, and during 
playback
 User-friendly Graphical User Interface (GUI) menu system 
 Various record modes (Time, Event, Pre-event, and Panic)
 Audio recording and playback
 Alarm connections include: Input, Output, and Reset Input
 Built-in alarm buzzer
 Live or recorded video access via Ethernet or modem 
						

							Introduction
Rev 3.03 2 Document 900.0315
02/07
Figure 1-1 Typical DVR Installation
Technical Overview
Your DVR can replace both a time-lapse VCR and a multiplexer in a security installation. 
However, it has many features that make it much more powerful and easier to use than 
even the most advanced VCR.
The DVR converts analog NTSC or PAL video to digital images and records them on a 
hard disk drive. Using a hard disk drive allows you to access recorded video almost 
instantaneously; there is no need to rewind tape. The technology allows you to view 
recorded video while the DVR continues recording.
Digitally recorded video has several advantages over analog video recorded on tape. 
There is no need to adjust tracking. You can freeze frames, fast forward, fast reverse, 
slow forward, and slow reverse without image streaking or tearing. Digital video can be 
indexed by time or events, and you can instantly view video after selecting the time or 
event.
Your DVR can be set up for event or time-lapse recording. You can define times to 
record, and the schedule can change for different days of the week and user defined 
holidays.
Audio input 1–4 
Audio output1–4 cameras
ATM/POSVGA
Spot
Digital Video Recorder
Internal CD-RW
USB backup deviceSensors 1–4
Siren
Flashing  Alarm
output
light
Monitor Multi-screen
Monitor
VGA