Honeywell 1300g2 Owners Manual

							11 - 3
Is the scanner having trouble reading your symbols?
If the scanner isn’t reading symbols well, check that the symbols:
 Aren’t smeared, rough, scratched, or exhibiting voids.
 Aren’t coated with frost or water droplets on the surface.
 Are enabled in the scanner or in the decoder to which the scanner connects.
Is the bar code displayed but not entered?
The bar code is displayed on the host device correctly, but you still have to press 
a key to enter it (the Enter/Return key or the Tab key, for example).
You need to program a suffix.  Programming a suffix enables the scanner to out-
put the bar code data plus the key you need (such as “CR”) to enter the data 
into your application.  Refer to Prefix/Suffix Overviewon page 4-1 for further 
information.
Does the scanner read the bar code incorrectly?
If the scanner reads a bar code, but the data is not displayed correctly on the 
host screen:
 The scanner may not be programmed for the appropriate terminal interface. 
For example, you scan “12345” and the host displays “@es%.”
Reprogram the scanner with the correct Plug and Play or Terminal selection 
bar code.  See Chapter 1 and Chapter 2.
 The scanner may not be programmed to output your bar code data properly.
For example, you scan “12345” and the host displays “A12345B.”
Reprogram the scanner with the proper symbology selections.  See 
Symbologiesbeginning on page 6-1.
The scanner won’t read your bar code at all.
1. Scan the sample bar codes in the back of this manual.  If the scanner reads 
the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see Symbologiesbeginning 
on page 6-1).  
2. If the scanner still can’t read the sample bar codes, scan All Symbologieson 
page 6-2.
If you aren’t sure what programming options have been set in the scanner, or if 
you want the factory default settings restored, scan Resetting the Custom 
Defaultson page 1-5. 
						

							11 - 4 
						

							12 - 1
12
Customer Support
Technical Assistance
If you need assistance installing or troubleshooting your device, please contact 
us by using one of the methods below:
Knowledge Base: www.hsmknowledgebase.com
Our Knowledge Base provides thousands of immediate solutions. If the 
Knowledge Base cannot help, our Technical Support Portal (see below) 
provides an easy way to report your problem or ask your question.
Technical Support Portal: www.hsmsupportportal.com
The Technical Support Portal not only allows you to report your problem, but it 
also provides immediate solutions to your technical issues by searching our 
Knowledge Base.  With the Portal, you can submit and track your questions 
online and send and receive attachments. 
Web form: www.hsmcontactsupport.com
You can contact our technical support team directly by filling out our online 
support form.  Enter your contact details and the description of the question/
problem.
Telephone: www.honeywellaidc.com/locations
For our latest contact information, please check our website at the link above.
Limited Warranty
Honeywell International Inc. (HII) warrants its products and optional accesso-
ries to be free from defects in materials and workmanship and to conform to 
HII’s published specifications applicable to the products purchased at the time 
of shipment.  This warranty does not cover any HII product which is (i) improp-
erly installed or used; (ii) damaged by accident or negligence, including failure 
to follow the proper maintenance, service, and cleaning schedule; or (iii) dam-
aged as a result of (A) modification or alteration by the purchaser or other party, 
(B) excessive voltage or current supplied to or drawn from the interface connec-
tions, (C) static electricity or electro-static discharge, (D) operation under condi-
tions beyond the specified operating parameters, or (E) repair or service of the 
product by anyone other than HII or its authorized representatives.
This warranty shall extend from the time of shipment for the duration published 
by HII for the product at the time of purchase (Warranty Period).  Any defective 
product must be returned (at purchaser’s expense) during the Warranty Period 
to HII factory or authorized service center for inspection.  No product will be 
accepted by HII without a Return Materials Authorization, which may be 
obtained by contacting HII.  In the event that the product is returned to HII or its 
authorized service center within the Warranty Period and HII determines to its 
satisfaction that the product is defective due to defects in materials or workman- 
						

							12 - 2
ship, HII, at its sole option, will either repair or replace the product without 
charge, except for return shipping to HII.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE 
FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR 
WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, 
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-
INFRINGEMENT.
HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER 
THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE 
DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.  IN NO 
EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSE-
QUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII 
ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER 
(WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON CON-
TRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL 
AMOUNT PAID TO HII FOR THE PRODUCT.  THESE LIMITATIONS ON LIA-
BILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY 
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, 
OR DAMAGES.  SOME STATES, PROVINCES, OR COUNTRIES DO NOT 
ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY 
NOT APPLY TO YOU.
All provisions of this Limited Warranty are separate and severable, which 
means that if any provision is held invalid and unenforceable, such determina-
tion shall not affect the validity of enforceability of the other provisions hereof.  
Use of any peripherals not provided by the manufacturer may result in damage 
not covered by this warranty. This includes but is not limited to: cables, power 
supplies, cradles, and docking stations. HII extends these warranties only to the 
first end-users of the products.  These warranties are non-transferable.
The duration of the limited warranty for the Hyperion 1300g is five (5) years. 
						

							A - 1
A
Appendix A
Symbology Charts
Note: “ m” represents the AIM modifier character.  Refer to International 
Technical Specification, Symbology Identifiers, for AIM modifier character 
details.
Prefix / Suffix entries for specific symbologies override the universal (All 
Symbologies, 99) entry.
Refer toData Editingbeginning on page 4-1 and Data Formattingbeginning on 
page 5-1 for information about using Code ID and AIM ID.
Linear Symbologies
AIMHoneywell
SymbologyID
Possible  
modifiers 
(m)
IDHex
All Symbologies99
Codabar ]Fm0-1 a 61
Code 11 ]H3 h 68
Code 128 ]Cm0, 1, 2, 4 j 6A
Code 32 Pharmaceutical 
(PARAF)]X0 < 3C
Code 39 (supports Full ASCII 
mode)]Am0, 1, 3, 4, 5, 7 b 62
TCIF Linked Code 39 
(TLC39)]L2 T 54
Code 93 and 93i ]Gm0-9, A-Z, 
a-mi69
EAN ]Em0, 1, 3, 4 d 64
EAN-13 (including Bookland 
EAN)]E0 d 64
EAN-13 with Add-On ]E3 d 64
EAN-13 with Extended 
Coupon Code]E3 d 64
EAN-8 ]E4 D 44 
						

							A - 2
EAN-8 with Add-On ]E3 D 44
GS1
GS1 DataBar ]em0y79
GS1 DataBar Limited ]em{ 7B
GS1 DataBar Expanded ]em}7D
GS1-128 ]C1 I 49
2 of 5
China Post (Hong Kong 2 of 
5)]X0 Q 51
Interleaved 2 of 5 ]Im0, 1, 3 e 65
Matrix 2 of 5 ]X0 m 6D
NEC 2 of 5 ]X0 Y 59
Straight 2 of 5 IATA ]Rm0, 1, 3 f 66
Straight 2 of 5 Industrial  ]S0 f 66
MSI ]Mm0, 1 g 67
UPC 0, 1, 2, 3, 8, 
9, A, B, C
UPC-A ]E0 c 63
UPC-A with Add-On ]E3 c 63
UPC-A with Extended 
Coupon Code]E3 c 63
UPC-E ]E0 E 45
UPC-E with Add-On ]E3 E 45
UPC-E1 ]X0 E 45
Add Honeywell Code ID 5C80
Add AIM Code ID 5C81
Add Backslash 5C5C
AIMHoneywell
SymbologyID
Possible  
modifiers 
(m)
IDHex 
						

							A - 3
Postal Symbologies
ASCII Conversion Chart (Code Page 1252)
In keyboard applications, ASCII Control Characters can be represented in 3 dif-
ferent ways, as shown below.  The CTRL+X function is OS and application 
dependent.  The following table lists some commonly used Microsoft functional-
ity.  This table applies to U.S. style keyboards.  Certain characters may differ 
depending on your Country Code/PC regional settings..  
AIMHoneywell
SymbologyID
Possible  
modifiers 
(m)
IDHex
All Symbologies99
Australian Post ]X0 A 41
British Post ]X0 B 42
Canadian Post ]X0 C 43
China Post ]X0 Q 51
InfoMail ]X0 , 2c
Intelligent Mail Bar Code  ]X0 M 4D
Japanese Post ]X0 J 4A
KIX (Netherlands) Post ]X0 K 4B
Korea Post ]X0 ? 3F
Planet Code ]X0 L 4C
Postal-4i ]X0 N 4E
Postnet ]X0 P 50
Non-printable            
ASCII control 
charactersKeyboard Control + ASCII (CTRL+X) mode 
ON (KBDCAS1)OFF (KBDCAS0)
DECHEXCharCTRL+XCTRL+ X 
functionControl 
Character Output 
Off (KBDNPE0)Control 
Character 
Output On  
(KBDNPE1)
000 NUL CTRL+ @   Reserved Txt: [NUL]
101 SOH CTRL+ A Select all NP Enter Txt: [SOH] 
						

							A - 4
202 STX CTRL+ B Bold Caps Lock Txt: [STX]
303 ETX CTRL+ C Copy ALT Make Txt: [EXT]
404 EOT CTRL+ D Bookmark ALT Break Txt: [EOT]
505 ENQ CTRL+ E Center CTRL Make Txt: [ENQ]
606 ACK CTRL+ F Find CTRL Break Txt: [ACK]
707 BEL CTRL+ G   Enter / Ret Txt: [BEL]
808 BS CTRL+ H History(Apple Make)Txt: [BS]
909 HT CTRL+ I Italic Tab Txt: [HT]
100A LF CTRL+ J Justify(Apple Break)Txt: [LF]
110B VT CTRL+ K hyperlink Tab Txt: [VT]
120C FF CTRL+ Llist, 
left alignDelete Txt: [FF]
130D CR CTRL+ M   Enter / Ret Txt: [CR]
140E SO CTRL+ N New Insert Txt: [SO]
150F SI CTRL+ O Open ESC Txt: [SI]
1610 DLE CTRL+ P Print F11 Txt: [DLE]
1711 DC1 CTRL+ Q Quit Home Txt: [DC1]
1812 DC2 CTRL+ R   PrtScn Txt: [DC2]
1913 DC3 CTRL+ S Save Backspace Txt: [DC3]
2014 DC4 CTRL+ T   Back Tab Txt: [DC4]
2115 NAK CTRL+ U   F12 Txt: [NAK]
2216 SYN CTRL+ V Paste  F1 Txt: [SYN]
2317 ETB CTRL+ W   F2 Txt: [ETB]
2418 CAN CTRL+ X   F3 Txt: [CAN]
2519 EM CTRL+ Y F4 Txt: [EM]
261A SUB CTRL+ Z F5 Txt: [SUB]
271B ESC CTRL+ [ F6 Txt: [ESC]
281C FS CTRL+ \ F7 Txt: [FS]
291D GS CTRL+ ] F8 Txt: [GS]
301E RS CTRL+ ^ F9 Txt: [RS]
311F US CTRL+ - F10 Txt: [US]
1277F⌂ NP Enter n/a 
						

							A - 5
Lower ASCII Reference Table
Note: Windows Code page 1252 and lower ASCII use the same characters. 
Printable Characters
DECHEXCharacterDECHEXCharacterDECHEXCharacter 
32206440@9660`
3321!6541A9761a
34226642B9862b
3523#6743C9963c
3624$6844D10064d
3725%6945E10165e
3826&7046F10266f
39277147G10367g
4028(7248H10468h
4129)7349I10569i
422A*744AJ1066Aj
432B+754BK1076Bk
442C,764CL1086Cl
45 2D-774DM1096Dm
462E.784EN11 06En
472F/794FO1116Fo
483008050P11 270p
493118151Q11 371q
503228252R11 472r
513338353S11 573s
523448454T11 674t
533558555U11 775u
543668656V11 876v
553778757W11 977w
563888858X12078x
573998959Y12179y
583A:905AZ1227Az
593B;915B[1237B{
603C945E^1267E~
633F?955F_1277F⌂ 
						

							A - 6
Extended ASCII Characters
DECHEXCP 1252ASCIIAlternate ExtendedPS2 Scan 
Code
12880€Çup arrow ↑0x48
12981üdown arrow ↓0x50
13082‚éright arrow →0x4B
13183ƒâleft arrow ←0x4D
13284„äInsert0x52
13385…àDelete0x53
13486†åHome0x47
13587‡çEnd0x4F
13688ˆ ê Page Up0x49
13789‰ ë Page Down0x51
1388AŠèRight ALT0x38
1398B‹ ï Right CTRL0x1D
1408CΔReservedn/a
1418Dì Reservedn/a
1428EŽ Ä Numeric Keypad Enter0x1C
1438FÅ Numeric Keypad /0x35
14490ÉF10x3B
14591‘æF20x3C
14692’ÆF30x3D
14793“ôF40x3E
14894”öF50x3F
14995•òF60x40
15096–ûF70x41
15197—ùF80x42
15298˜ÿF90x43
15399™ÖF100x44
1549AšÜF110x57
1559BݢF120x58
1569Cœ £ Numeric Keypad +0x4E
1579D¥ Numeric Keypad -0x4A
1589Ež₧Numeric Keypad *0x37
1599FŸƒCaps Lock0x3A
160A0 á Num Lock0x45
161A1¡íLeft Alt0x38
162A2¢óLeft Ctrl0x1D
163A3£úLeft Shift0x2A
164A4¤ñRight Shift0x36