Honda Vtx 1800 F Service Manual
Here you can view all the pages of manual Honda Vtx 1800 F Service Manual. The Honda manuals for Motorcycle are available online for free. You can easily download all the documents as PDF.
Page 41
VTX1800F (1) mode switch (2) odometer (3) tripmeter A (4) tripmeter B (5) digital clock(4) (5) (1)(2) (3) (6) (6) reset switch 32 Gauges, Indicators & Displays Instruments & Controls To reset the tripmeter, push and hold the reset switch ( ) f or more than 2 seconds when the display is in the ‘‘TRIP A’’ or ‘‘TRIP B.’’6 04/08/11 14:29:14 31MCH630_041
Page 42
VTX1800F (1) (1) mode switch 33 Changing the Speed and Mileage Unit Gauges, Indicators & Displays Instruments & Controls The speedometer displays both ‘‘mph’’ and ‘‘km/h.’’ The odometer/tripmeter displays both ‘‘mile’’ and ‘‘km.’’ To select ‘‘mph’’/‘‘mile’’ and ‘‘km/h’’/‘‘km’’, push and hold the mode switch ( ) f or more than 2 seconds with the display in the odometer mode.1 04/08/11 14:29:22 31MCH630_042
Page 43
VTX1800F (1) digital clock (2) mode switch (3) reset switch(3)(2)(1) 34Digital Clock Gauges, Indicators & Displays Instruments & Controls Turn the ignition switch ON. Shows hour and minute. To adjust the time, proceed as follows: To select the digital clock mode ( ). Push and hold both the mode switch ( ) and reset switch ( ) for more than 2 seconds. The clock will be set in the adjust mode with the hour display f lashing. 1. 2. 3.1 32 04/08/11 14:29:32 31MCH630_043
Page 44
VTX1800F 35 Gauges, Indicators & Displays Instruments & Controls To set the hour, push the reset switch until the desired hour is displayed.Push the mode switch. The minute display will start f lashing. 4.5. 04/08/11 14:29:40 31MCH630_044
Page 45
VTX1800F 36 Gauges, Indicators & Displays Instruments & Controls To set the minute, push the reset switch until the desired minute is displayed. The minute display will return to ‘‘00’’ when ‘‘60’’ is reached without af f ecting the hour display.To end the adjustment, push the mode switch or turn the ignition switch OFF. The display will stop f lashing automatically and the adjustment will be cancelled if the switch is not pressed f or about 30 seconds. 6.7. 04/08/11 14:29:47 31MCH630_045
Page 46
VTX1800C (2) odometer/tripmeter serect and reset button odometer tripmeter tripmeter reset(2) (1) odometer/tripmeter display(1) FRONT 37 Odometer/Tripmeter Display Gauges, Indicators & Displays Instruments & Controls The display ( ) has two f unctions, odometer and tripmeter. To select a mode, push the button ( ). To reset the tripmeter, push and hold the button with the display in the tripmeter mode.1 2 04/08/11 14:29:56 31MCH630_046
Page 47
ON OFFElectrical circuits on. No electrical circuits function.(1) ignition switch LEFT SIDE (1) Key Position Function 38Ignition Switch Controls & Features Instruments & Controls The ignition switch is used f or starting and stopping the engine (page ). The ignition key is also used to lock the steering f or thef t prevention (page ). Insert the key and turn it to the right f or the ON position. If a key ring is used, we recommend a f abric or leather type with just the key attached. The use of a metal...
Page 48
(1) RIGHT HANDLEBAR (2) OFF RUN (1) start button (2) engine stop switch 39 Start Button Engine Stop Switch Controls & Features Instruments & Controls Starting Procedure, When the start button is pushed, the starter motor will crank the engine; the headlight will automatically go out, but the taillight will stay on. The starter motor will not operate if the engine stop switch is in the OFF position when the start button is pushed.The engine stop switch ( ) is used to stop the engine in an emergency. To...
Page 49
(1) (2) (1) headlight dimmer switch (2) turn signal switch (3) horn buttonHI LO (3) LEFT HANDLEBAR 40Turn Signal Switch Headlight Dimmer Switch Controls & Features Instruments & Controls If your motorcycle is stopped with the ignition switch ON and the engine stop switch OFF, the headlight and taillight will remain on, resulting in battery discharge.Theturnsignalswitch( )isusedtosignal a turn or a lane change. To operate, move the switch all the way in the proper direction and release it. The...
Page 50
41 Horn Button Controls & Features Instruments & Controls The horn is used to alert other motorists. To operate, push the horn button ( ).3 04/08/11 14:30:29 31MCH630_050