Honda Pilot Owners Manual

380
Features
HomeLink® Universal Transceiver*
The HomeLink ® Universal Transceiver can be pr ogrammed to operate up to three 
remote controlled devices around your home, such as garage doors, lighting, or 
home security systems.
Refer to the safety information that came wi th your garage door opener to test that 
the safety features are functioning properly. If you do not have the safety 
information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the...

381
uuHomeLink ® Universal Transceiver*u Training HomeLink
Continued
Features
Training HomeLink
If it is necessary to er ase a previously entered 
learned code:
• Press and hold the two outside buttons for 
about 20 seconds, until the red indicator 
blinks. Release the bu ttons, and proceed to 
step 1.
• If you are training the second or third 
button, go directly to step 1.
The instructions on the next page should  work for most gate or garage openers, but 
may not work for all.  For detailed instru...

uuHomeLink ® Universal Transceiver*u Training HomeLink
382
Features
■Training a Button1Training HomeLink
Retraining a Button
If you want to retrain  a programmed button for a 
new device, you do not ha ve to erase all button 
memory. You can replace the existing memory code 
using this procedure:
1. Press and hold the desired HomeLink button 
until the HomeLink indi cator begins to blink.
2.
Quickly release the Home Link button and follow 
steps 1 - 3 under “Training a Button.” You do not 
need to press...

383Continued
Features
Bluetooth® HandsFreeLink ®
Bluetooth® HandsFreeLink ® (HFL) allows you to place  and receive phone calls using 
your vehicle’s audio system, without handling your cell phone.
Using HFL
 (Pick-up) button:  Press to go directly to the  Phone screen or to answer an 
incoming call.  (Hang-up/Back) button:  Press to end a call or to cancel a command.
 (Talk) button:  Press to call a number wi th a stored voice tag.
 (Phone) button:  Press to go directly to the  Phone screen.
Selector...

uuBluetooth ® HandsFreeLink ®u Using HFL
384
Features
The audio/information screen notifies you 
when there is an incoming call.
Certain manual functions are disabled or inoperable while the ve hicle is in motion. 
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed  dial entries can be called using voice commands while 
the vehicle is in motion.
2 Speed Dial P. 398
■HFL Status Display1Using HFL
Bluetooth ® Wireless Technology
The  Bluetooth ® word mark and...

385
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
HFL Menus
The power mode must be in ACCESSO RY or ON to use the system.1HFL Menus
To use HFL, you must first pair your  Bluetooth-
compatible cell phone to th e system while the vehicle 
is parked.
Some functions are li mited while driving. 
 or 
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
*1 : Appears only when a phone is connected to HFL.
PhoneSpeed Dial*1Add New
Select a phone...

386
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
*1 : Appears only when a phone is connected to HFL.
Redial the last number dialed in the phone’s history.
Add New Device
Connect a Phone
Connect an Audio Device
Bluetooth SetupPhone Setup
Redial*1
Pair a phone to the system.
Connect a phone to the system.
Change a pairing code.
Disconnect All Devices
Delete Device
Pass-key
Disconnect a paired device from the system.
Delete a previously paired device. Connect a 
Bluetooth® Audio device to the 
system....

387
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
*1 : Appears only when a phone is connected to HFL.
Call History
Phonebook
Phone Number
Speed Dial*1
Select a phone number from the phonebook 
to store as a speed dial number. Select a phone number from the call history 
to store as a speed dial number.
Create a voice tag for a speed dial number.
Change Speed Dial
Delete Speed Dial
Store Voice Tag
Enter a phone number to store as a speed dial 
number.
Delete a previously stored speed dial...

388
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
Fixed
Mobile Phone
System Clear
Ringtone
Select the ring tone stored in the connected 
cell phone.
Name Priority
Number Priority
Caller ID InfoPrioritize the caller’s name as the caller ID.
Clear the system of all paired phones, phonebook entries, 
and security codes. Prioritize the caller’s phone number as the 
caller ID.
Select the ring tone stored in HFL.
16 PILOT-31TG76000.book  388 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 

Continued389
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To pair a cell phone (when there is no 
phone paired to the system)
1. Press the   button or the   button.
2. Rotate   to select  Yes, then press  .
3. Make sure your phone is in search or 
discoverable mode, then press  .
u HFL automatically searches for a 
Bluetooth ® device.
4. When your phone appears on the list, select 
it by pressing  .
u If your phone does not appear, select 
Phone Not Found?  and search for 
Bluetooth ® devices using...