honda cbr600rr 2009 owners User Manual

(2)
(3) (1)
(1) digital clock
(2) SEL button
(3) RESET button
32 Digital Clock
Gauges, Indicators & Displays
Instruments & Controls
Turn the ignition switch ON.
Shows hour and minute. To adjust the time,
proceed as follows:
Push and hold both the SEL button ( )
and RESET button ( ) for more than 2
seconds. The clock will be set in the
adjust mode with the hour display
f lashing.
1.
2.
32
——
yy
y
y 

µ
33
Gauges, Indicators & Displays
Instruments & Controls
Push the SEL button. The minute
display will start flashing.
The time is advanced by one hour,
each time the button is pushed.
Quick setting push and hold the
RESET button until the desired hour
and AM/PM appear.
To set the hour, push the RESET button
until the desired hour and AM/PM are
displayed.
(cont’d)
3. 4.
——
yy
yy 

µ
34
Gauges, Indicators & Displays
Instruments & Controls
To set the minute, push and release the
RESET button until the desired minute
is displayed. The minute display will
return to ‘‘00’’ when ‘‘60’’ is reached
without af f ecting the hour display.Quick setting push and hold the
RESET button until the desired
minute appears. The time advances by one minute,
each time the button is pushed. To end the adjustment, push the SEL
button or turn the ignition switch OFF.
The display will stop f lashing...

ON
OFFElectrical circuits on.
No electrical
circuits function.
No electrical circuits
function. Locks the
steering head.
LOCK
(steering
lock) FRONT
(1) ignition switch
O OF
FF
F
LOC
 K O
ON
N
(1
)
Key Position Function
35
Ignition Switch
Controls & Features
Instruments & Controls
The ignition switch ( ) is used for starting
and stopping the engine (page ) and to
lock the steering for theft prevention
(page ). Insert the key and turn it to the
right f or the ON position. Push down on
the key and turn it...

(1)
RIGHT HANDLEBAR
(2)
(1) start button
(2) engine stop switch OFF RUN
36Start Button
Engine Stop Switch
Controls & Features
Instruments & Controls
Starting Procedure,
The start button ( ) is used f or starting the
engine. Pushing the button in starts the
engine. See
page .
The engine will not operate if the engine
stop switch is in the OFF position when
the start button is pushed. When the start button is pushed, the starter
motor will crank the engine; the headlight
will automatically go out, but the...

(1)
(2)
HI
LO
(3)
(1) headlight dimmer switch
(2) turn signal switch
(3) horn button
LEFT HANDLEBAR
37
Turn Signal Switch
Headlight Dimmer Switch
Controls & Features
Instruments & Controls
Theturnsignalswitch( )isusedtosignal
a turn or a lane change. To operate, move
the switch all the way in the proper
direction and release it. The appropriate
turn signal lights will start blinking. To
cancel the light, push the switch in.
The headlight dimmer switch ( ) is used
to change between the high and low beams...

µ
38Horn Button
RESET Button
SEL Button
Controls & Features
Instruments & Controls
The horn is used to alert other motorists.
To operate, push the horn button ( ).
TheRESETbuttonisalsousedtochange
the speed, mileage and temperature units
f or the speedometer/odometer/tripmeter/
coolant temperature meter (pages
). TheRESETbuttonisalsousedtosetthe
digital clock (page ).
TheSELbuttonisalsousedtosetthe
digital clock (page ). The SEL button is used to select odometer,
tripmeter A or tripmeter B. To select...

(1)
(2)
(1) HESD
(2) HESD indicator
39
HESD (Honda Electronic
Steering Damper)
Controls & Features
Instruments & Controls
This motorcycle is equipped with the
electronically-controlled steering damper.
The HESD ( ) automatically controls the
steering damper characteristics in
accordance with vehicle speed and
acceleration.
The HESD indicator ( ) lights when there
is any abnormality in the HESD. The
HESD indicator should also light f or a
few seconds and then go off when the
ignition switch is turned ON...

40Instruments & Controls
——
y
y
yy 

41
Bef ore Riding
Before Riding
Before each ride, you need to make sure
you and your Honda are both ready to ride.
To help get you prepared, this section
discusses how to evaluate your riding
readiness, what items you should check on
your motorcycle, and adjustments to make
f or your comf ort, convenience, or saf ety.
This section also includes important
inf ormation about loading.
For inf ormation about adjusting the
suspension on your Honda, see page .........................
Are You Ready to Ride? ....