Hitachi Z3000w Manual

							68
Studio system operation
Camera control from personal computer
The camera can be controlled by RS-232C signals from a personal computer. In this case, the JU-C20 RS-232C
Level Converter or the JU-Z2 Junction Unit is required.
Since camera control software is not supplied,refer to the protocol technical data and compile a suitable program
according to the computer being used.
Technical data are available regarding the software protocol for controlling the camera. Please consult a Hitachi
Denshi representative.
Technical data
1£ç
Remote control protocol
2£ç
Z-3000 remote control command list 
						

							69
Studio system operation
Connection with Ru-Z1 system
The camera can be connected into a studio system comprising an RU-Z1 remote operation unit and RC-Z1A /Z11
camera control panel to enable remote operation of the camera control functions. The camera and RU-Z1 can be
separated by up to 300 meters, while a 5-inch viewfinder.
MULTI SYSTEM
  
SET UP CARD
 
Microphone MC-Z2
 
Microphone ME-66
                   MC-Z3Microphone holder
MH-Z3
Microphone cable
C-300MA
Zoom lens
Tripod adaptor
TA-Z3
Camera cable
C-152KR
C-502KR
C-103KRRemote operation uinit
RU-Z1 5-inch view finder
GM-51
View finder adaptor
AT-30 Camera adaptor
CA-Z31Camera control panel
RC-Z1/RC-Z11
 1.5-inch view finder
 GM-9
Lens cable kit
 
Battery mount
(for ANTON BAUER)
QR DP800
AC adaptor
Battery mount
(for NP-1 series)
Battery mount
(for BP-90)
Camera head
Z-3000/Z-3000W
Headset
Refer to the RU-Z1 Remote Operation Unit and RC-Z1A / Z11A operation manuals for detailed operating instructions.
ROU adaptor unit
W hen connecting the RU-Z1, install the RU-Z1
accessory ROU adaptor unit in the CA-Z31 camera
adaptor as indicated in the figure.
Note: The unit is not interchangeable with the ROU-
sADP3 for the CA-Z32
POWER select switch setting
Set the power select switch to CCU / VTR. 
						

							70
  Studio system operation
Auto setting with RU-Z3 / RU-Z2 / RU-Z1 (plug & play)s
No System Baud rate Audio level Video output Battery type
1RU-Z1
62.5K(Î
1)
2RU-Z2 /RC-Z3
9600(Î
1)RGB
COMP100
COMP75
YC,
VBS    (Î
2)
(TU-Z3 system)
(COMP TRIAX)9600(Î
1)COMP100
(Î
1)
3TU-Z2
inner module
via IM-Z3B9600(Î
1)-20db(Î
1)
RGB(Î
1)12. 0V(Î
1)
     (Î
3)
4Self-contained
inner module operation
M-Z3B
(Betacam)
M-Z3P
(DVCPRO)
IM-Z3S
(BetaPRO)
IM-Z3J
(Digital-S)62. 5K,
9600AUTO(Î
4) AUTO(Î
4)12. 0V
13. 2V
14.4V
5Self-contained
Camera adapter operation
CA-Z31/32
(portable VTR)62.5K
9600-60dB
-20dBCOMP100,
COMP75,
YC,
VBS,
RGB
Notes:
1.   W hen RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) remote control is off, although settings can be changed at the camera head full menu,
 the I nitial settings are returned at resupply of power.
2.   W hen RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) remote control is off, settings can be changed at the camera head full menu.
Settings
 are  stored as common setting values in the RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) memory.
3.    W ith RU-Z1/Z2A, Alarm Set is fixed at 11.0 V.
4.    W hen Auto is indicated, settings are automatic at the inner module.
RU-Z2(RU-Z1)RGB connector signal output
The signals indicated in the table can be selected for output
from the RU-Z2(RU-Z1)RGB connector.
1. 
Set the RC-Z2A/Z21A/Z3(RC-Z1/Z11) remote
control switch to off. Control shifts from the RC to
the camera.
 
2. 
Select the SYSTEM sub-menu from the Function
menu, then select the output signal at the VIDEO
 item.
Note: W hen the RBG connector output is other than 
RGB, the RU-Z2 waveform monitor (W FM OUT) display does not operate correctly.
Output signal
connector
RGB Component Y / C VBS
RRR-YCµ
G G Y Y VBS
BBB-Yµµ

						

							Pers onal c omputer
MULTI SYSTEMTRIAX SYSTEM
SET UP CARD
Microphone MC-Z2
MC
-Z3
Microp
hone 
ME
-66
Microphone holder
MH-Z3
Microphone cable
C-300MA
Zoom lens
T ripod adaptor
TA-Z3
Camera cable
C-152KAB
C-502KAB
C-103KABCamera base station
RU-Z2/RU-Z3
Camera base station
TU-Z3 Camera cable
C-152KR
C-502KR
C-103KRRemote operation uinit
RU-Z1 5-inch view finder
GM-51
View f inder adaptor
AT-30 Camera adaptor
CA-Z31
Camera adaptor
CA-Z32
Betac am adaptor
IM-Z3BT riax adaptor
CX-Z3Junction unit
JU-Z2
Camera control panel
RC-Z1/RC-Z11Camera control panel
RC-Z2A/RC-Z21A/RC-Z3
Betacam SP
Betacam SX
DVCAM inner module
IM-Z3S
PVV-3
DSR-1
Digital-S inner module
IM-Z3J
BR-D40
BR-S422
 
1.5-inch view finder
 GM-9
Lens cable kit
Betacam
MII
S-VHS
U-matic
VTR cable C-201TE
VTR cable C-201TB
C-501TB
VTR cable C-201TD
C-501TD
VTR cable C-301TF
Extention adaptor
EA-Z3
Battery mount
(for ANTON BAUER)
QR DP800
AC adaptor
Battery mount
(for NP-1 series)
Battery mount
(for BP-90)
Carrying case
CL-Z3
Camera head
AJ-D90
AU-45H
DVCPRO inner module
IM-Z3P
IM-Z3D
 System configration
71 
						

							72
ç
çç çService information
Connector pin diagrams
Camera
Remote (4 pin female) MIC IN (3 pin female)
1
23
412
3
LENS (12 pin female) VF (8 pin male)
1
2
3
4
11
5
7
12
6
89
10
C
B
H
E
F
D
AG
Pin Signal
1 +9V output
2 SD input
3 SD output
4 SD ground
Pin Signal
1 MIC GND
2 MIC(H) IN
3 MIC(C) IN
Pin Signal
1AUX SW
2 CALL TRG
3GND
4ENF AUTO
5 IRIS CONTROL
6 +12V
7 IRIS POSITION
8NC
9NC
10 NC
11 NC
12 NC
Pin Signal
A B LED(C)
B! LED
CVF 9V
D +12V
ES LED
FVF VIDEO(Y)
GGND
HT LED 
						

							73
Camera adapter (CA-Z31/CA-Z32)
DC IN (4 pin male) INTERCOM (5 pin male)
1
23
4
15
3
42
Pin Signal
1SHIELD
2T
3GND
4R
5R
Pin Signal
1GND
2NC
3NC
4 +12V input 
						

							74
ç
çç çService information
CCU/VTR (28 pin male)»
CA-Z31¼
A
BC
D
1234
5678
9
101112
13
14
1615
17182019
21 22 23 24
CCU/VTR (26 pin male)»
CA-Z32¼
AB
123456
7891011
12 13 14 15 16 17
18 19 20 21 22
23 24
150 V OUT (5 pin male)»
CA-Z32¼
5
4
1
2
3
Pin Signal Pin Signal
A +12V 11 COLOR FRAME
B +40V 12 VBS VIDEO
C SHIELD GND 13 VTR SAVE
D POW ER GND 14 BATT ALM
1 GL GND 15 SD GND
2 GL 16 VBS GND
3 R.G.B GND 17 INCOM L1
4 R/R-Y/C 18 CALL/TRIG
5 VTR TRG 19 SYNC CHR
6 REC/TALLY 20 AUX GND
7 G/Y/VBS 21 SYNC CHR GND
8 B/B-Y 22 INCOM L2
9 AUDIO(+) 23 SD
10 AUDIO(-) 24 AUX VIDEO
Pin Signal Pin Signal
A +150V/+12V 12 PROMPT GND VTR TRIG
B POW ER GND 13 PROMPT VIDEO BATT ALM
1 VBS 14 INTER LOCK TAPE IND
2 VBS GND 15 INCOM2 REC/TALLY
3 G/Y/VBS GND 16 GL RET V CONT
4 G/Y/VBS 17 INCOM GND
5 R/R-Y/C 18 AUX VIDEO PB VIDEO
6 R/R-Y/C GND 19 AUX GND PB GND
7 B/B-Y 20 INCOM1 VTR SAVE/
AUDIO MON
8 B/B-Y GND 21 GL GND TAPE REMAIN
9 MIC(H) 22 SD2 C.F. PULSE
10 MIC(C) 23 SD1 VD
11 MIC GND 24 SD GND C.SYNC
Pin Signal
1NC
2 RLY CONT
3 RLY CONT GND
4 +150V OUT
50V 
						

							HITACHI DENSHI, LTD.
1, Kanda Izumi-cho Chiyoda-ku, Tokyo 101-0024, Japan
Phone: 03-5821-5311, FAX: 03-5821-5394
HITACHI DENSHI AMERICA, LTD.*
Headquarters and New York Office
150 Crossways Park Drive, W oodbury, New York 11797, U.S.A.
Phone: 516-921-7200, FAX: 516-496-3718
Chicago Office
450 East Devon Ave., Suite 110 Itasca, IL 60143, U.S.A.
Phone: 630-250-8050, FAX: 630-250-8054
Los Angeles Office
371 Van Ness W ay, Suite 120 Torrance, CA. 90501, U.S.A.
Phone: 310-328-6116, FAX: 310-328-6252
Dallas Office
2100 W est N. W . Highway Suite 1145 Grapevine, TEXAS 76051, U.S.A.
Phone: 817-488-4528, FAX: 817-488-4714
Atlanta Office
3039 Amwiler Roed, Suite 118 Atlanta, Georgia 30360, U.S.A.
Phone: 404-242-3636, FAX: 404-263-8838
HITACHI DENSHI CANADA, LTD.*
Head Office
1 Select Avenue Unit#14 Scarborough, Ontario CANADA M1V 5J3.
Phone: 416-299-5900, FAX: 416-299-0450
Eastern Office
5795 Chemin St. Francois St. Laurent, Quebec CANADA H4S 1B6
Phone: 514-332-6687, FAX: 514-335-1664
Ottawa Office
9 Antares Drive, Nepean Ontario, K2E 7V5, Canada
Phone: 613-727-3930, FAX: 613-825-4253
HITACHI DENSHI (EUROPA) GmbH*
Head Office
W esikircher Straße 88, Jüesheim D-63110 Rodgau, Germany
Phone: 06106-6992-0, FAX: 06106-16906
HITACHI DENSHI (U.K.) LTD.*
Head Office
14 Garrick Industrial Centre, Irving W ay, Hendon, London NW 96 AQ, United Kingdom
Phone: 0181-202-4311, FAX: 0181-202-2451
HITACHI DENSHI, LTD.   BEIJING OFFICE
100004 Beijing Fortune Bullding 5,
Dong San Huan Bei-lu, Chao Yang District, Beijing China
Phone: 010-6590-8755/8756, FAX: 010-6590-8757
Beijing Service Center
B19, Bei San Huan Middle Road Beijing China
Phone: 010-6204-3901, FAX: 010-6204-3902
HITACHI DENSHI, LTD.    SINGAPORE BRANCH
10 Anson Road #20-15 International Plaza singapore 079903
Phone: 65-223-0030, FAX: 65-223-0206
* Subsidiaries of Hitachi Denshi, Ltd.
9911 100