Home > Hitachi > Oscilloscope > Hitachi V-209 Service Manual

Hitachi V-209 Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hitachi V-209 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Q) 
    Operation 
    [!RIG)  MODI l V- V  ,TRJCJ 
    MODI:  fV-11 
    (  Oll  )  lim  O\tlllmcopc  ,ynchronizc�  \\llh only 
    (-)  ,ym;hronum)!  \l!!nal. 
    (REFERENCE) 
    Video  tgnal 
    Synchronizmg  signal 
    (a)  Example  of(-) 
    synchronizing  signal  (b) 
    Example  of(+} 
    synchronizing  signal  9. 
    ADJUSTMENTS 
    The  ATT  balance  of the  '-Crtkal  "''scan be made  easily. 
    Qj  ct 
    the  input  couphng  �\Htchc of C Ill  .tiiJ  CH�  to 
    G:-.:D  and set the  TRIG  MODI  to \L ro.  1  hen posn10n 
    the  bright  line to the  center. 
    �  Turn  the VOLTS  DIY switch  to SmV  IOmV and ad­
    JUSt  it so  that  the bnght  line does  not move  (Remove  the 
    cover). 
    CHI DC  B-\L 
    -\dJU'tm.:nt o l..:::..--l-�./ 
    , ...  
    						
    							1 0.  MAINTENANCE 
    28  I) 
    Since  semiconductors,  precJsJon components,  etc. are 
    employed  in this  oscilloscope,  use atmost  care for opera­
    tion  and storage. 
    2) Clean  the scale  with soft tissue  periodically. 
    3)  Store  this oscilloscope  in the  ambient  temperature  from 
    -15  to +60°C  (except  for the  battery  pack AD-209)  .  11. 
    SPECIFICATIONS 
    !CR T! 
    Type 
    3.5-inch  rectangular  CRT with internal  graticule. 
    P h osp hor 
    P31  standard 
    Graticule  8 x 10  div  (div  = 6.85  mm) 
    Internal  graticule 
    Focussing  Possible  (with  automatic  focus correction  circuit) 
    Trace  rotation 
    Brightness  adjustment  Present 
    Possible 
    I  Z-AXIS 
    INPUT (INTENSITY 
    MODULATIO@ 
    DC-coupled,  positive-going  signal decreases  intensity: 
    SVp-p  signal causes  noticeable  modulation  at normal 
    intensity:  DC to l MHz 
    Input  impedance 
    Approximately 50  k ohm  
    						
    							Maximum 
    input voltage 
    SOV (DC+ peak  AC) 
    Coupling  DC 
    VERTICAL  DEFLECTION  SYSTEM (2 identic�  �hannetS}] 
    Bandwidth  and rise time 
    DC  to at least  20 MHz  and rise time  17.5  ns or less.  DC 
    to  at least  5 MHz  and rise time 70ns  or less  at magnifier 
    extends.  The AC coupled  lower -3dB point  is I 0  Hz  or 
    less. 
    Deflection  factor 
    SmV/div  to SV/div  in 10  calibrated  steps in a I  2  5 
    sequence.  Uncalibrated  continuous control extends  de­
    flection  factor to at least  12.5 Volts  per division  in the 
    5  Volts/div  position. xS MAG  increases  sensitivity  of 
    each  deflection  factor setting  to I mV/div. 
    Accuracy  ±3%  (+10to+35°C) 
    Additional  error for magnifier  ±2% 
    Display  modes 
    CHI,  CH2 (normal  or invert),  Alternate,  Chopped 
    (approximate  250kHz), Added  Input 
    impedance 
    1  MS1  ± 1.5c;(  in parallel  with 30 ±3pF 
    Maximum  input voltage 
    250V  (DC+ peak  AC') or SOOVp-p  A(' at I kHz  or less 
    Input  coupling 
    AC, GND.  DC 
    L  HORIZONTAL  DEFLECTION SYST
    EM] 
    Time  base 
    O.S ps/div  to 0.2s/div  in 18  calibrated  steps in a I  2  5 
    s eq uenc e.  Uncalibrated  continuous control extends  de­
    flection  factor to at least  0.5 seconds  per division  in 
    the  0.2 sec/div  position.  xI 0 MAG  extends  maximum 
    sweep  rate to 50ns/div. 
    Accuracy  ±3%  (+IO to +35°C) 
    AdditionaJ  error for magnifier ±2% 
    [ TRIGGERING  SYSTEM! 
    Trigger  modes 
    Automatic,  Normal, TV (TV-H  orTV-V) 
    29  
    						
    							JO Trigger 
    source 
    Internal  (ChI. Ch2),  Lmc, l:.:
    						
    							I 
    POWER 
    SUPPLY 
    I 
    VOLTAGE  {S0/60Hz) 
    IO OV  (90  130V) 
    200V  (180-260V) 
    Power  supply  frequency:  SO, 
    60,  400Hz 
    Power  consumption:  Approx. 
    18W  FUSE 
    lA 
    O.SA 
    EXT  DC power  supply: 
    DC IIV- 14Y  Approx.  0.8A 
    ' E NVIRONMENT  I 
    Limit  of operation  temperature 
    Limit  of operation  humidity 
    Rated  range of use  temperature 
    Rated  range of use  humidity 
    Storage  and transport  temperature 
    f  DIMENSIONS 
    AND WEIGHT 
    I 
    Approx.  215(W) x II  O(H)  x 330(0)  mm 
    (8.6(W)  x 4.4(H)  x 6.4(0)  inch)  35 
    85% 
    45-85% 
    -20-+70 °C  Approx. 
    4.5 kg ( 10  lbs) 
    j option  I 
    Accessory  pouch 
    Hood  Shoulder  belt 
    I  AD- 209 type  Battery  � 
    Batteries 
    Nominal  capacity 
    Nominal  voltage  I 0 
    rechargeable 
    A  nickel-cadmium cells 
    1800  mAh 
    12V 
    Battery  execessive  discharge protection 
    Instrument  operation automatically  interruped when 
    battery  charge drops to approximately  JO.SY. 
    Charge  current 
    Approx. 180 rnA 
    Charge  time 
    13-16 hours for full  charge 
    31  
    						
    							1 
    2.  EXTERNAL  VIEW 
    32  TOP  YiC\� ...... .. 
    • 
    • 
    00 
    000000 
    0 
    0 
    ··� 
    SIDE  view  UniL: 
    mm 
    '10DEL  V-209  
    						
    All Hitachi manuals Comments (0)

    Related Manuals for Hitachi V-209 Service Manual