Hitachi Projector Cp X605 Users Manual

							31
INPUT Menu
INPUT Menu
Item Description
PROGRESSIVE8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHSURJUHVVPRGH
TV
Ù FILM 
Ù TURN OFF
• This function is performed only for an interlaced signal of a VIDEO 
input, an S-VIDEO input or COMPONENT VIDEO input of 525i
(480i), 625i (576i) or 1125i (1080i) signal.
• When TV or FILM is selected, the screen image will be sharp. 
FILM adapts to the 2-3 Pull-Down conversion system. But these 
may cause a certain defect (for example, jagged line) of the picture 
for a quick moving object. In such a case, please select TURN OFF, 
even though the screen image may lose the sharpness.
VIDEO NR8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHQRLVHUHGXFWLRQPRGH
HIGH
Ù MID 
Ù LOW
• This function performs only at a VIDEO input, an S-VIDEO or 
COMPONENT VIDEO input of 525i(480i), 625i(576i) or 1125i (1080i) 
signal.
• When this function is excessive, it may cause a certain 
degradation of the picture. 
3D-YCS8VLQJWKH
x
zEXWWRQVVZLWFKHVWKH
						

							32
Item Description
COMPONENT8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHIXQFWLRQRIWKH&20321(17
(Y, C
B/PB, CR/PR) port.
COMPONENT 
Ù SCART RGB 
When the SCART RGB is selected, the COMPONENT (Y, C
B/PB,
C
R/PR) and VIDEO ports will function as a SCART RGB port. A 
SCART adapter or SCART cable is required for a SCART RGB 
input to the projector. For details, contact your dealer.
VIDEO FORMATSet the video format for the s-video port and video port.
(1) Use thH
{
yEXWWRQVWRVHOHFWWKHLQSXWSRUW
8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGH
for video format.
AUTO  
Ù  NTSC
Ù  PAL  
Ù  SECAM 
      N-PAL 
Ù M-PAL 
Ù NTSC4.43 
• This item is performed only for a video signal 
from the VIDEO port or the S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture becomes unstable (e.g. an irregular picture, lack of color), 
please select the mode according to the input signal.
M1-D8VLQJWKH
x
zFXUVRUEXWWRQVFKDQJHVWKH0VLJQDOPRGH
NORMAL 
Ù ENHANCED
Feature
NORMAL Suitable for DVD signals (16-235)
ENHANCED Suitable for VGA signals (0-255)
• If the contrast of the screen image is too strong or too weak, try 
¿QGLQJDPRUHVXLWDEOHPRGH
INPUT Menu
INPUT Menu (continued)
8+&1(14/#6
58+&1
#761
065%
2#.
5%#/
065%
/2#.
02#.8+&1
(continued on next page)
VIDEOAUDIO IN 1
AUDIO IN 2
S-VIDEO
RL R  L
   AUDIO IN 3  AUDIO IN 4
CB/PBY
C
R/PR
SCART OUT
Video G B R 
						

							33
Item Description
FRAME LOCK8VLQJWKH
x
zEXWWRQVWXUQVWKHIUDPHORFNIXQFWLRQRQRII
TURN ON 
Ù TURN OFF
• This item can be performed only on an RGB signal with a vertical 
frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed 
more smoothly.
• This function may cause a certain degradation of the picture. In 
such a case, please select the TURN OFF.
RGB INSet the RGB input signal type for the RGB port.
(1) Use thH
{
yEXWWRQVWRVHOHFWWKH5*%
port to be set.
RGB1
Ù RGB2
8VHWKH
x
zEXWWRQVWRVHOHFWWKH5*%
input signal type.
SYNC ON G ON 
Ù SYNC ON G OFF
• Selecting the SYNC ON G ON turns the SYNC ON G mode on. 
The SYNC ON G mode allows reception of a sync on G signal.
• In the SYNC ON G mode, the picture may be distorted with certain 
input signals. In such a case, remove the signal connector so that 
no signal is received and turn the SYNC ON G mode off, and then 
reconnect the signal.
INPUT Menu
INPUT Menu (continued)
4)$+0
4)$
5;0%10)1(( 5;0%10)10
4)$
(continued on next page) 
						

							34
INPUT Menu
Item Description
RESOLUTIONThe resolution for the RGB1 and RGB2 input signals can be set on 
this projector.
,QWKH,1387PHQXVHOHFWWKH5(62/87,21XVLQJWKH
x
zEXWWRQVDQG
SUHVVWKH
yEXWWRQ
The RESOLUTION menu will be displayed.
(2)  In the RESOLUTION menu select the 
UHVROXWLRQ\RXZLVKWRGLVSOD\XVLQJWKH
x
z
buttons.
Selecting AUTO will set a resolution 
appropriate to the input signal.
3UHVVLQJWKH
yRU(17(5EXWWRQZKHQ
selecting a STANDARD resolution will 
automatically adjust the horizontal and 
vertical positions, clock phase and horizontal 
size and automatically select an aspect ratio. 
The INFORMATION dialog (
	46)  will be 
displayed.
7RVHWDFXVWRPUHVROXWLRQXVHWKH
x

zEXWWRQVWRVHOHFWWKH&86720DQG
the CUSTOM RESOLUTION BOX will be 
displayed. Set the horizontal (HORZ) and 
YHUWLFDO9(57UHVROXWLRQVXVLQJWKH
x
z
{

yEXWWRQV
Although not all resolutions are guaranteed.
(5) To save the setting place the cursor on the 
ULJKWPRVWGLJLWDQGSUHVVWKH
yEXWWRQ
The horizontal and vertical positions, 
clock phase and horizontal size will be 
automatically adjusted and an aspect ratio will 
be automatically selected. 
After the INFORMATION(
	46) dialog has 
displayed for about 10 seconds the screen will 
return to the RESOLUTION menu displaying 
the changed resolution.
(6) To revert back to the previous resolution 
without saving changes place the cursor on 
WKHOHIWPRVWGLJLWDQGSUHVVWKH
{EXWWRQ
The screen will then return to the RESOLUTION menu displaying the 
previous resolution.
• For some pictures, this function may not work well.
INPUT Menu (continued)
451.76+10
56#0&
%7561/#761
Z
Z
Z
Z
RESOLUTION MENU
INFORMATION
RGB1
1280x 768@ 60
INFORMATION
RGB1
992x 744@ 60
451.76+10
56#0&
%7561/#761
Z
Z
Z
Z
%7561/451.76+10
56 
*14
						

							35
SETUP Menu
SETUP Menu
Item Description
AUTO 
KEYSTONE 
EXECUTESelecting this item performs the Automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the Menu. 
When the slant of the projector is changed, executes this function again.
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work well.
•
When V:INVERT or H&V:INVERT is selected to the MIRROR item in the 
SETUP menu, if the projector screen is inclined or angled downward, this 
function may not work correctly.
•When the zoom adjustment is set to the TELE (telephoto focus), this 
function may be excessive. This function should be used when the zoom 
adjustment is set to the full WIDE (wide-angle focus) whenever possible.
•When the projector is placed on the level (about ±3°), this function may not work.
• When the projector is inclined to near ±30 degree or over, this 
function may not work well.
•
When the vertical lens shift is not set fully upward (not set fully downward for 
the optional lens type FL-601 only 
(	45)), this function may not work well.
• When the horizontal lens shift is not set to the center, this function 
may not work well.
•
This function will be unavailable when the Transition Detector is on(	51).
KEYSTONE 
8VLQJWKH
x
Shrink the top of the image 
Ù Shrink the bottom of the image
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work well.
•
When the vertical lens shift is not set fully upward (not set fully downward for 
the optional lens type FL-601 only 
(	45)), this function may not work well.
•When the horizontal lens shift is not set to the center, this function may not work well.
•This function will be unavailable when the Transition Detector is on(	51).
KEYSTONE 
8VLQJWKH
x
Shrink the right of the image 
Ù Shrink the left of the image
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work well.
•
When the horizontal lens shift is not set to the center, this function may not work well.
•This function will be unavailable when the Transition Detector is on(	51).
From the SETUP menu, items shown in the table below 
can be performed.
6HOHFWDQLWHPXVLQJWKH
x
zFXUVRUEXWWRQVRQWKH

on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
according to the following table./07=4)$?
5.%6

-;5610
 #761-;5610:%76
9*+524014/#.
/+4414014/#. -;5610
 +/#) 2+%674
5672+0276
5%40
126+10#7&+1
06914-
#5;/07
(continued on next page) 
						

							36
SETUP Menu
SETUP Menu (continued)
Item Description
WHISPER8VLQJWKH
x
zEXWWRQVWXUQVRIIRQWKHZKLVSHUPRGH
NORMAL 
Ù WHISPER
• When the WHISPER is selected, acoustic noise and screen 
brightness are reduced.
MIRROR8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUPLUURUVWDWXV
NORMAL 
Ù H:INVERT 
Ù V:INVERT 
Ù H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is 
changed, Transition Detector Alarm (
	51) will be displayed when 
projector is restarted after the power switch is turned off. 
						

							37
AUDIO Menu
AUDIO Menu
Item Description
VOLUME8VLQJWKH
x
zEXWWRQVDGMXVWVWKHYROXPH
High
Ù Low
TREBLE8VLQJWKH
x
zEXWWRQVDGMXVWVWKHWUHEOHOHYHO
High
Ù Low
BASS8VLQJWKH
x
zEXWWRQV adjusts the bass level.
High
Ù Low
SRS WOW8VLQJWKH
x
zEXWWRQV switches the mode for SRS WOW mode.
HIGH
Ù MID 
Ù OFF
• SRS WOW™ accomplishes this by providing a panoramic three-

horizontal and vertical planes, and lowers the perceived bass 
response well beyond the low frequency limitations of the drivers. 
Adjust it depending on the user's preference.
SPEAKER8VLQJWKH
x
zEXWWRQV turns the speaker function on/off.
TURN ON 
Ù TURN OFF
• When the TURN ON is selected the built-in speaker works.
AUDIOAllocates the audio ports.
&KRRVHDSLFWXUHLQSXWSRUWXVLQJWKH
x
z
buttons.
           RGB1
ÙRGB2ÙM1-D
VIDEO
ÙS-VIDEOÙCOMPONENT
(2) Select the audio port to be interlocked with 
WKHLQSXWSRUWXVLQJWKH
{
yEXWWRQV
1
Ù2
Ù 3 
Ù 4 
Ù
When is selected to an input port, any audio ports do not work 
interlocking with the input port, and any items in AUDIO menu are 
invalid.
From the AUDIO menu, items shown in the table below can 
be performed.
6HOHFWDQLWHPXVLQJWKH
x
zFXUVRUEXWWRQVRQWKH

on the projector or remote control, or ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table./07=4)$?
+/#)
 2+%674

+0276

126+10
06914-
#5;/075%40

5.%6

81.7/
64$.
$#55
545919
52#-4
#7&+1





/+&
674010 5672
#7&+1
#7&+1


4)$
/& 37+6

4)$

58+&1
8+&1%1/21006

NOTE  • The speaker sound may distorted or the case may be trembling 
when the volume is too high or treble/bass is emphasized or WOW is activated. 
In that case, make the volume reduced, bass/treble low or WOW effect to be 
weakend. 
						

							38
SCREEN Menu
SCREEN Menu
Item Description
LANGUAGE
8VLQJWKH
x
zEXWWRQVVZLWFKHVWKH262Q6FUHHQLVSOD\ODQJXDJH
SUOMIÙ POLSKI Ù TÜRKÇE ENGLISHÙ FRANÇAIS Ù DEUTSCHÙ ESPAÑOLÙ ITALIANO
NORSKÙ NEDERLANDS Ù PORTUGUÊSÙãÄ.†
Ù Ù Ù SVENSKAÙ
MENU POSITION8VLQJWKH
{
y
x
zEXWWRQVDGMXVWVWKHPHQXSRVLWLRQ
To quit the operation, press the MENU button on the remote control 
or keep no operation for about 10 seconds.
BLANK8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUWKHEODQNVFUHHQ
The blank screen is a screen for the temporarily blanking feature
(
	22). It is displayed by pressing the BLANK button on the remote 
control.
MyScreen
Ù ORIGINAL 
ÙBLUE
Ù WHITE 
Ù BLACK
Feature
MyScreenScreen can be registered by the MyScreen item 
(	40).
ORIGINAL Screen preset as the standard screen.
BLUE, WHITE, 
BLACKPlain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the plain black screen after several minutes.
From the SCREEN menu, items shown in the table below 
can be performed.
6HOHFWDQLWHPXVLQJWKH
x
zFXUVRUEXWWRQVRQWKH

on the projector or remote control, or ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table./07=4)$?
5.%6

.#0)7#)0).+5*

/07215+6+10

56#467214+)+0#.

/[5ETGGP
/[5ETGGP.QEM67401((
5174%0#/ /55#)674010$.#0-$.#%-+/#) 2+%674
5672+0276
5%40
126+10#7&+1
06914-
#5;/07
(continued on next page) 
						

							39
SCREEN Menu
Item Description
START UP8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUWKHVWDUWXSVFUHHQ
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen
Ù ORIGINAL 
Ù TURN OFF
Feature
MyScreenScreen can be registered by the MyScreen item 
(	40).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK screen (
	38) after several 
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, 
the plain black screen is instead used.
• When the TURN ON is selected to the MyScreen PASSWARD of 
SECURITY item in OPTION menu (
	48), the START UP is fixed to 
MyScreen.
SCREEN Menu (continued)
(continued on next page) 
						

							40
SCREEN Menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1. Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the 
current screen.
Please wait for the target image to be displayed, and press 
the ENTER button on the remote control when the image is 
displayed. The image will freeze and the frame for capturing will 
appear.
To stop performing, press the RESET or ESC button on the 
remote control. 
8VLQJWKH
x
z
{
yEXWWRQVDGMXVWV
the frame position.
Please move the frame to the position 
of the image which you want to use. The 
frame may not be able to be moved for 
some input signals.
To start registration, press the ENTER 
button on the remote control.
To restore the screen and return to the previous dialog, press the 
RESET or ESC button on the remote control.
Registration takes several minutes.
When the registration is completed, the registered screen and the 
following message is displayed for several seconds:
³0\6FUHHQUHJLVWUDWLRQLV¿QLVKHG´
If the registration failed, the following message is displayed:
³$FDSWXULQJHUURUKDVRFFXUUHG3OHDVHWU\DJDLQ´
• This item cannot be selected for an M1-D signal.
• This function cannot be selected when the TURN ON is selected 
to the MyScreen Lock item (
	below).
• This function cannot be selected when the TURN ON is selected 
to the MyScreen PASSWARD of SECURITY item in OPTION menu 
(
	48).
MyScreen Lock8VLQJWKH
x
zEXWWRQVWXUQVRQRIIWKH0\6FUHHQORFNIXQFWLRQ
TURN ON 
Ù TURN OFF
When the TURN ON is selected, the item MyScreen is locked. Use 
this function for protecting the current MyScreen.
• This function cannot be selected when the TURN ON is selected 
to the MyScreen PASSWARD of SECURITY item in OPTION menu 
(
	48).
SCREEN Menu (continued)
/[5ETGGP&Q[QWUVCTVECRVWTKPIVJKURKEVWTG!
01;55%06
/[5ETGGP/QXGVJGECRVWTGCTGC
CU[QWYCPV

467400:6456064
/[5ETGGP

L U
(continued on next page)